Accessories

Crealitys Space Pi Filament Dry Box helps keep your filament dry while youre printing. It gently heats the material to avoid problems like stringing, clogs, or bad layer adhesion. With an easy-to-use touchscreen and support for a wide range of filaments, its a handy addition to any 3D printing setup. HighlightsDries filament during the printing process360-degree air circulation with PTC heatingAdjustable temperature from 45 to 70 °CUp to 48-hour timer with one-touch presetsEasy-to-read 3.7-inch touchscreen displayRemembers settings after a power outage

The PolyDryer Box from Polymaker is an efficient solution for the safe storage of filaments. The Dryer Box in modular design is excellently sealed and keeps moisture mercilessly away from your filament spools! HighlightsExcellent sealing performanceModular designVersatile compatibility

Wet 3D printing filament can result in stringing, clogging, poor adhesion, and layer shifting. The Creality Spcae Pi Filament Dryer Plus solves these issues by drying the filament during the printing process itself, enhancing your 3D model quality and minimizing the influence of external environmental factors on the printing of 3D filaments. HighlightsTwo rolls capacity, double dryingAdjustable temperature 45-70Real-time humidity&temperature monitoringDrying time setting 0-48h360° hot-air heatingOne-key set for 12 filaments

The PolyDryer from Polymaker is a 2-in-1 solution for the efficient drying and safe storage of filaments. The dryer in the modular design is excellently sealed and keeps moisture mercilessly away from your filament spools! A 360° air flow with 3 adjustable power levels ensures even, efficient drying of the materials. HighlightsModular Design - Add more boxes to protect all your spoolsSuperior Sealing - Ready to print without ever opening the boxEfficient Drying - 360° drying system to revive your spools

The Polymaker PolyDryer Dock is a modular drying solution designed to enhance the performance of the PolyDryer system. With flexible settings, powerful drying capabilities, and compatibility with PolyDryer Box and Box XL, it provides users with an efficient and expandable way to keep filament in optimal condition. Key Features 3 adjustable drying levels for different filament needs Flexible timer settings for complete control 360° drying system for consistent results Compatible with PolyDryer Box and PolyDryer Box XL Modular design for expanding and customizing drying setups Standalone dry unit for 3D printing filament Power adapter included: AC100-240V, 50/60Hz, DC24V/68W output

The perfect solution for taking your laser engraving projects to the next level. This innovative enclosure provides a safe and controlled environment for your laser engraving machine, allowing you to work with peace of mind and precision. Experience improved results and enhanced efficiency with this must-have accessory for your laser engraving setup.HighlightsDustproof and SmokeproofEfficient Smoke ExhaustEasy to OperateProtect HealthSize 720 x 720 x 400mm

Dry your filament before use to get the best printing result. Avoid errors caused by air bubbles and reduce errors caused by warping and stringing. HighlightsAdjustable temperature 45-65°CReal-time humidity monitoringDrying time setting 0-24h360° hot-air heating

The Copymaster3D Magnetic Build Surface is a reliable, budget-friendly interchangeable print surface cut precisely to 235 × 235 mm. With a soft magnetic backing and porous top layer, it offers fast warm-up, excellent first-layer adhesion, and easy print removal—no glue or tape needed. Key Features: • Precision cut 235 × 235 mm size fits many FDM printers • Flexible magnetic backing enables effortless print removal • Quick heating—warms faster than traditional glass • Deep porous texture promotes strong filament adhesion • Includes two-part system: top sheet + magnetic base • Compatible with printers like Ender 3, Ender 5 series, and more

Upgrade your 3D printing setup with the Copymaster3D Magnetic Build Surface cut to 310 × 310 mm. This high-quality, magnetic two-piece system provides fast heating and excellent adhesion with deep-porous texture, while keeping prints securely in place and easy to remove. Ideal as a replacement or upgrade for popular printers like CR 10, Anet, and Sidewinder X-series. Highlights Precisely cut 310 × 310 mm to fit most FDM printers Soft magnetic backing makes print removal effortless Faster heat-up compared to glass beds Deep pores enhance initial layer adhesion Includes top print surface and magnetic base layer Easy peel-off and reattach system—no tape or sprays needed

The Creality K2 Plus Ceramic Heating Block Kit delivers fast, stable, and efficient heat transfer for high-performance 3D printing. Designed specifically for the Unicorn K2 Plus hotend, the kit combines advanced ceramic insulation with a robust heating element to ensure consistent temperature control, even at higher print speeds.Key FeaturesOptimized for Creality Unicorn K2 Plus hotendRapid and uniform heat distributionCeramic insulation reduces heat lossSupports high-speed and high-temp printingDurable and stable under long-term useEasy replacement and secure installation

The K2 Plus Epoxy Resin Build Plate provides a smooth and stable surface for 3D printing, ensuring strong adhesion and consistent print quality. Its durable epoxy resin construction enhances reliability, making it a great choice for various printer models. Key Features Excellent adhesion for reliable prints High flatness for consistent results Durable epoxy resin material Compatible with multiple printer models

The Polymaker Polysher is a desktop post-processing unit designed to seamlessly smooth 3D printed models made with PolySmooth and PolyCast filaments. Utilizing Polymakers Layer-Free technology, it employs a fine mist of isopropyl alcohol (IPA) or ethanol to gently dissolve surface layer lines, resulting in a glossy, professional-quality finish. This compact and user-friendly device is ideal for creators seeking to enhance the aesthetic quality of their 3D prints without manual sanding or painting.Key FeaturesCompatible exclusively with PolySmooth and PolyCast filamentsEmploys Layer-Free technology for smooth, glossy surfacesSimple operation with adjustable misting time (10-40 minutes)Maximum part dimensions 150 mm diameter x 180 mm heightSafe design with airtight sealing and automatic shut-offRequires isopropyl alcohol or ethanol (70% or higher)

The Phaetus Dragon ST HeatBreak Kit is a genuine replacement designed for the Dragon ST hotend. Made from a copper alloy with a nickel plating, it provides excellent thermal conductivity and wear resistance. The heatbreak ensures stable temperature separation between the hot and cold zones, reducing the risk of heat creep and improving print consistency. Perfect for maintaining reliable performance with engineering-grade materials. Key Features Original heatbreak kit for Dragon ST hotend Nickel-plated copper alloy for durability Excellent thermal conductivity Prevents heat creep and improves stability Optimized for engineering-grade filaments Easy to install as a replacement part

Comes with a Copper Plated Reprap M6 0,4 mm Nozzle.

The Phaetus Voron Dragon HF is a high-performance, all-metal hotend designed for demanding 3D printing applications. With ultra-fine heatbreak insulation, rapid heating, and superb flow rate, it excels in precision and high-temperature use up to 500 °C. Fully compatible with E3D V6 setups, it ensures reliable and versatile performance. Key Features Ultra-thin 0.1 mm titanium heatbreak for exceptional thermal isolation Rigid support structure secures heatbreak under external forces Nozzle change without touching the heat block Copper alloy components for fast and stable heating Supports abrasive and high-temp filaments up to 500 °C Drop-in replacement for E3D V6 interface

Phaetus Rapido Hot-End Ultra High Flow - Black

The Phaetus Dragonfly HIC HF Integrated Welded Nozzle 0.4 mm is an original hardened-steel nozzle designed specifically for the Dragonfly HIC HF hotend. With its robust one-piece welded M6 construction, it provides optimal heat transfer, sealing and durability—ideal for high-performance, high-flow printing. Key Features Hardened steel, welded one-piece M6 nozzle Precisely 0.4 mm diameter for fine detail Exclusive to Dragonfly HIC HF hotend Superior heat transfer and leak resistance Exceptional wear resistance and longevity Designed for high-speed, high-performance printing

The Nebula Smart Kit from Creality combines speed and high quality with maximum flexibility. The kit consists of the Nebula Pad and the Nebula Camera, which are equipped with versatile functions to achieve the best printing results when used together.HighlightsHigh-Speed PrintingPrecise ControlRemote monitoring & recordingEasy Installation

The Snapmaker Basswood Sheet A250 (5-pack) offers a lightweight, laser-compatible wood material ideal for engraving, cutting, and modeling applications. Each sheet measures 200 x 200 mm with a fine 1.5 mm thickness, providing excellent flexibility and surface uniformity. Made from natural basswood, these sheets deliver a smooth, light-toned finish that ensures clear engraving results and clean cut edges. Key Features Precision-cut basswood sheets for laser use 200 x 200 mm size fits the Snapmaker A250 and similar platforms 1.5 mm thickness supports fine cutting and bending Light, even grain for clean engraving and minimal charring Ideal for models, ornaments, crafts, and artistic projects Supplied in a flat-packed 5-piece set

The Snapmaker MDF Wood Sheet (10-pack) is a dense, uniform wood composite designed for laser cutting, engraving, and CNC carving. Each sheet measures 80 x 80 mm with a sturdy 3 mm thickness, providing a compact format ideal for small-scale prototypes, detail work, and material testing. The medium-density fiberboard (MDF) composition offers smooth surfaces on both sides, ensuring consistent results with minimal warping or fiber separation. Key Features Compact MDF sheets for laser and CNC use Size: 80 x 80 mm – ideal for small-format projects 3 mm thickness ensures rigidity and dimensional consistency Smooth, even surface on both sides Great for engraving, cutting, and test runs Supplied in a flat-packed 10-piece set

Copper alloy / hardened steel material, meet high temperature, wear-resistant material printing. Comes with a Copper Plated Reprap M6 0,4 mm Nozzle.

The Phaetus Dragon HeatSink Blue is made from anodized aluminum and designed for Dragon hotends. It provides efficient heat dissipation to keep the hotend stable and helps prevent heat creep during longer prints. The blue anodized finish adds durability and a distinctive look. Key Features Original heatsink for Dragon hotends Anodized aluminum construction Efficient heat dissipation Helps prevent heat creep Durable blue anodized surface Easy to install as a replacement part

The Phaetus VORON Dragon ST is a high-quality, all-metal hotend optimized for precision 3D printing. Featuring a 0.1 mm titanium heatbreak, efficient copper alloy construction, and compatibility with V6-style mounts, it delivers fast heating, excellent thermal isolation, and broad filament support—rated up to 500 °C. Key Features Ultra-thin 0.1 mm titanium heatbreak with excellent thermal isolation Copper alloy core for rapid heating and efficient heat dissipation Reinforced rigid frame for stable performance and easy nozzle changes Polished internals (Ra 0.3) for smooth filament flow and fine detail Full-metal design with high-temp capability up to 500 °C Drop-in compatible with E3D V6, Prusa, Titan and BMG setups

The Phaetus Dragonfly HIC HF Integrated Welded Nozzle 0.6 mm is a high-performance hardened-steel nozzle tailored for high-speed 3D printing. Featuring a welded, one-piece M6 design, it delivers optimal thermal conductivity, wear-resistance, and extrusion precision for professional and industrial applications. Key Features Original 0.6 mm nozzle for Phaetus Dragonfly HIC HF hotends Made from hardened steel for superior durability Welded one-piece construction with M6 thread High thermal conductivity for consistent performance Designed for high-speed, precise extrusion Ideal for demanding and professional printing environments

The Phaetus Dragonfly HIC HF Integrated Welded Nozzle (0.8 mm) is a high-flow, welded hardened-steel nozzle designed for the Dragonfly HIC HF hotend. It delivers exceptional wear resistance, leak-free operation, and superior thermal performance for demanding printing environments. Key Features Welded, one-piece hardened steel construction for high strength and durability Optimized for high-volume extrusion in fast, industrial-grade printing Precise 0.8 mm diameter—ideal for large layer heights and rapid deposition Excellent thermal conductivity and sealing to prevent leaks Exclusively compatible with Phaetus Dragonfly HIC HF hotend

FeaturesAll V6 hotend interfacesPrusa I3 MK3/MK3STitan ExtrudersBMG Extruders