3D Printer

The Bambu Lab A1 Mini 3D Printer is a game-changer in FDM 3D printing, redefining flow control. It utilizes a high-resolution, high-frequency eddy current sensor to precisely measure nozzle pressure. The A1 mini comes to you pre-assembled, pre-squared, and pre-tuned with precision. It only takes about 20 minutes to set up for your first print.HighlightsPlug-N-Play ConvenienceActive Flow Rate CompensationFull Auto CalibrationPrint SilentlyHigh-Speed PrecisionActive Flow Rate Compensation180 x 180 x 180 mm Maximum Build Volume

The Bambu Lab P1S is like its predecessor one of the front edge high-speed printers on the market. Enclosed with a proper cooling setup, the P1S enables better print performance with a wider range of advanced filaments. Furthermore, the P1S is equipped with an activated carbon filter to provide a solution for printing filaments such as ABS that are prone to emitting odors and harmful gases during the printing process.HighlightsIncludes the Automatic Material SystemUp to 20000 mm/s acceleration, prints a benchy in 18minWorks right out of the box, set up in 15 minutesEnclosed-body for high-temperature filament printingWell-polished hardware and software

The Bambu Lab P1S is like its predecessor one of the front edge high-speed printers on the market. Enclosed with a proper cooling setup, the P1S enables better print performance with a wider range of advanced filaments. Furthermore, the P1S is equipped with an activated carbon filter to provide a solution for printing filaments such as ABS that are prone to emitting odors and harmful gases during the printing process.HighlightsUp to 20000 mm/s acceleration, prints a benchy in 18minWorks right out of the box, set up in 15 minutesEnclosed-body for high-temperature filament printingWell-polished hardware and software

Bambu Lab A1 printer is a cutting-edge technology that revolutionizes the field of 3D printing. Powered by the latest advancements in additive manufacturing, this printer sets new standards in precision, speed, and versatility. With its sleek design and user-friendly interface, Bambu Lab A1 seamlessly integrates into any professional workspace or personal creative studio. Now featuring an upgraded and durable heatbed cable. The all-new AMS lite is elegant and reliable, making multi-color 3D printing accessible to everyone.HighlightsMulti-Color Printing256 x 256 x 256 mm Build VolumeFull-auto CalibrationActive Flow Rate Compensation1-Clip Quick Swap NozzleActive Motor Noise CancellingUpgraded heatbed cable

The Bambu Lab X1 Carbon 3D Printer is the ultimate tool for aspiring creators, artists, and engineers. With its cutting-edge technology and sleek design, this printer delivers unmatched precision, speed, and versatility. Equipped with a high-quality carbon fiber frame, the Bambu Lab X1 Carbon 3D Printer can effortlessly handle all your printing needs. Whether you are printing intricate models, molds, or prototypes, this printer delivers stunning results every time.Highlights:Includes the X1 Carbon Printer and the Automatic Material SystemMulti Color & Multi Material CapabilityHigh quality printing with 7 μm Lidar ResolutionUpgradeable and customizable flexibilityHigh speed CoreXY with 20000 mm/s² AccelerationDual Auto Bed Leveling

The latest 3D printer Bambu Lab P1P inherits the proven kinematics and motion control system of the X1 series, as well as the rich sensors to ensure its reliability. It can connect the automatic material system (AMS) for multi-color printing. Great for beginners, professionals, or others who enjoy the fun of being creative, the P1P has been designed for easy setup and use in minutes. Additionally, it allows upgrading and customizing hardware with mod-friendly features for people to enjoy the fun of making their own one-of-a-kind 3D printer. Invest in the Bambu Lab P1P 3D Printer today and start bringing your ideas to life!Highlights:Out of the Box printing experience. Set up in 15 minutes.High-speed CoreXY structure with 20000 mm/s² acceleration.Upgradeable and customizable to make your unique printer. Multi-color capability.State-of-the-art electronics, including vibration compensation, pressure advance, Wifi connection, and camera.

Bambu Lab A1 printer is a cutting-edge technology that revolutionizes the field of 3D printing. Powered by the latest advancements in additive manufacturing, this printer sets new standards in precision, speed, and versatility. Now featuring a new and improved heatbed cable for enhanced durability, the Bambu Lab A1 seamlessly integrates into any professional workspace or personal creative studio.Highlights256 x 256 x 256 mm Build VolumeFull-auto CalibrationActive Flow Rate Compensation1-Clip Quick Swap NozzleActive Motor Noise CancellingUpgraded heatbed cable

The Bambu Lab A1 Mini 3D Printer is a game-changer in FDM 3D printing, redefining flow control. It utilizes a high-resolution, high-frequency eddy current sensor to precisely measure nozzle pressure. The A1 mini comes to you pre-assembled, pre-squared, and pre-tuned with precision. It only takes about 20 minutes to set up for your first print. Included in this combo-set is the all-new AMS lite which is elegant and reliable, making multicolor 3D printing accessible to everyone.HighlightsPlug-N-Play ConvenienceActive Flow Rate CompensationFull Auto CalibrationActive Motor Noise CancellingHigh-Speed PrecisionActive Flow Rate Compensation180 x 180 x 180 mm Maximum Build VolumeIncludes AMS Lite

Building on the success of the acclaimed Creality K1, the K1C is an enclosed Core XY FDM printer capable of speeds up to 600 mm/s. Designed to compete with the industrys top 3D printers, the K1C sets a new standard with its all-metal hotend, upgraded motor system, and innovative build plate. The K1Cs capabilities extend beyond PLA it is specifically optimized for the use of carbon fiber filament the C in K1C stands for carbon. In addition, the K1Cs hotend can reach and maintain temperatures of up to 300 degrees Celsius, and its direct drive system is engineered to process carbon fiber filament with exceptional proficiency.HighlightsBuild Volume 220 x 220 x 250mmClog-free All-metal Extruder Kit600mm/s Max Printing SpeedSupporting Carbon Fiber FilamentsObservant Al Camera

The Anycubic Kobra S1 is a fully enclosed 3D printer designed for speed, precision, and ease of use. With a maximum print speed of 600mm/s, a quiet printing mode, and compatibility with a wide range of filaments, its perfect for both beginners and experienced users who value performance and convenience.HighlightsFully enclosed CoreXY design, 250250250mm print volume 600mm/s ultra-fast printing with 20000mm/s acceleration320 hotend with easy disassembly and anti-clogging features Compatible with ASA, ABS, PLA, TPU, PETG filamentsQuiet operation as low as 44dB in quiet modeIncludes Anycubic Slicer Next and app for advanced control

The Creality Hi is a high-performance 3D printer designed to deliver exceptional results with speed and accuracy. With a sturdy all-metal frame, advanced motor technology, and user-friendly features, its an excellent choice for creators seeking reliability and quality. The printer supports multi-color printing with up to four CFS units, available for purchase separately, making it adaptable for future upgrades.Key FeaturesCompatible with up to 4 CFS units for multi-color printing (sold separately)Supports easy removal of support structures using multi-material printing95% pre-assembled for a quick and hassle-free setupDurable tri-metal nozzle for clog-free performanceStable all-metal frame for consistent print qualityHigh-speed printing with max acceleration of 12,000mm/s

The K2 Plus Combo revolutionizes 3D printing with its intelligent CFS unit, enabling multi-color printing and automatic filament backup. As the pinnacle of Crealitys 2nd generation K series, the K2 Plus boasts an expansive build volume of 350 x 350 x 350mm. It is equipped with the cutting-edge APUS extruder, a closed-loop motor system, and an active chamber heater, among other advanced features. Experience unparalleled precision and versatility with the K2 Plus Combo, setting new standards in 3D printing technology.HighlightsSupports Multi-Color Printing With Up to 16 Colors Using 4 CFSDirect Drive ExtruderTilt Detection350x350x350mm Build Volume600mm/s Maximum Printing Speed

Just like the K1 printer, K1 Max reaches new levels of printing speed but with the large build volume of 300 x 300 x 300mm. K1 Max uses an AI camera to watch over spaghetti failure, foreign objects, debris, etc. It will alert you when an error occurs.Highlights:600mm/s Printing SpeedVersatile AI LiDARObservant AI CameraLarge Build Volume：300*300*300mm

CFS is an advanced filament management system designed to enhance your 3D printing experience. With features like automatic filament identification, smooth material switching, and moisture-proof storage, it ensures high-quality prints with minimal waste and interruptions.Key FeaturesSupports 16 colors for creative printingSnap-away or water-soluble support materialIntelligent sensors for optimized performanceAutomatic filament detection and managementMoisture-proof storage for better filament longevityIncludes essential accessories for setup

The Creality Hi Combo introduces a new level of innovation for 3D printing enthusiasts, offering impressive features like multi-color printing, precise support removal, and ultra-fast print speeds. With user-friendly assembly and an all-metal frame, its designed for both beginners and advanced users seeking efficiency and quality.Key FeaturesPrint up to 16 colors with 4 CFS units (one included, additional sold separately)Easy removal of supports using multi-material printing95% pre-assembled for quick setupAll-metal frame for stability and styleDurable, clog-free nozzle with quick-swap capabilityHigh-speed printing with max acceleration of 12,000mm/s

The Bambu Lab X1 Carbon 3D Printer is the ultimate tool for aspiring creators, artists, and engineers. With its cutting-edge technology and sleek design, this printer delivers unmatched precision, speed, and versatility. Equipped with a high-quality carbon fiber frame, the Bambu Lab X1 Carbon 3D Printer can effortlessly handle all your printing needs. Whether you are printing intricate models, molds, or prototypes, this printer delivers stunning results every time.Highlights:Multi Color & Multi Material CapabilityHigh quality printing with 7 μm Lidar ResolutionUpgradeable and customizable flexibilityHigh speed CoreXY with 20000 mm/s² AccelerationDual Auto Bed Leveling

The CR-10 SE is the latest Creality FDM 3D printer aimed at advanced users. The new printer solves the problem of getting the ideal first layer by auto-leveling using multiple sensors upon startup. It also features a model cooling fan to prevent distorted overhangs and can print at up to 600 mm/s.Highlights600 mm/s Max Printing SpeedHands-free Auto LevelingLinear Rails at X & Y-AxisDedicated Model Cooling FanHotend with 60W Ceramic Heater

The Creality K2 Plus is an advanced FDM 3D printer designed for precision, speed, and versatility, making it ideal for demanding projects. With a large 350 x 350 x 350 mm build volume, the K2 Plus enables users to create large-format models or multiple smaller items in a single run. The printer is compatible with the CFS (not included), making multi-color printing possible.Highlights350 x 350 x 350mm Build VolumeDirect Drive Apus all-metal extruderTilt Detection600mm/s Maximum Printing Speed

Creality Ender-3 V3 is an updated version of the popular Ender-3 3D printer from Creality. This budget-friendly desktop 3D printer offers a fast and stable printing experience, making it ideal for both beginners and experienced users.HighlightsCoreXZ for 600mm/s Printing SpeedBuild Volume 220 x 220 x 250mmStable Metal Build with Die-cast PartsIntegrated Tri-metal Nozzle, Quick to SwapTwo Mighty Fans for Instant CoolingAuto Calibration for Leveling and More

FLSun T1 features a build volume of 260 x 260 x 330 mm and is focused on high-speed printing – claiming a max speed of 1,000 mm/s, acceleration of up to 30,000 mm/s, and a volumetric flow rate of 90 mm. The T1 has an all-metal frame, ensuring the stability of ultra high-speed 3D printing. The enclosed design enables perfect printing with more filaments.Highlights1000mm/s Max Speed and 30000mm/s AccelerationSupport Various High Temperature MaterialsClosed Enclosure with Acrylic MaterialFully Auto-leveling and Vibration CompensationCameras for Time-lapse Photography and Remote Monitoring

The CreatBot D600 Pro 2 is a reliable and advanced large-format 3D printer designed for professional users. With a spacious build volume, high-temperature capabilities, and smart features, it offers consistent performance for complex and demanding applications. Whether youre working with engineering-grade materials or creating detailed models, this printer is built to deliver.HighlightsBuild volume 600x600x600 mmMax temperatures 420°C nozzle, 100°C bed, 70°C chamberDual extruders with auto-rising functionalityMagnetic removable build platform7-inch touchscreen and remote control via appStable 24/7 operation

The D1000 HS takes large-format 3D printing to a whole new level. Designed for speed, precision, and durability, it offers an enormous build volume and advanced features like a high-speed dual extruder system. Whether youre creating prototypes, molds, or tools, this printer delivers professional-grade results faster than ever.HighlightsBuild volume up to 100010001000 mmPrints at up to 300mm/s for high-speed resultsDual extruders with 420°C max temperatureAutomatic leveling and real-time camera monitoringSupports engineering-grade materials like UltraPA-CFSturdy steel frame for long-lasting reliability

The CreatBot F430 NX is the next generation of professional-grade high-speed 3D printers, designed to meet the needs of engineers, designers, and professionals. With a large build volume, advanced dual-extrusion technology, and compatibility with a wide range of high-performance materials, this printer offers reliable, high-precision results for even the most demanding applications.HighlightsLarge build volume 400x300x300 mm (single mode)Supports engineering-grade materials like ABS, Nylon, and Carbon FiberIndependent dual extruders (IDEX) for versatile printing modesHeated chamber up to 70°C to prevent warpingHigh-speed printing up to 300 mm/sUser-friendly 5 touchscreen with WiFi connectivity

Snapmaker 2.0, the modular 3-in-1 3D printers that unlock your full creative potential, from 3D printing to laser engraving, cutting, and CNC carving. Snapmaker 2.0 is smarter, faster, larger, and more powerful than ever before. It is a new generation of 3-in-1 3D printers that come with everything you need!Highlights:Use as a 3D printer, CNC machine or laser engravingLarge print area A150: 160 x 160 x 145 mm, A250: 230 x 250 x 235 mm and A350: 320x350x330 mmFuture-proof as it can be upgradedWiFi5 ”touch screenEasy to assembleResume work after power failureAutomatic setting of building board

The Anycubic Photon Mono M7 is a state-of-the-art resin 3D printer, boasting an incredible 14K resolution (13,312 x 5,120 pixels) on a monochrome LCD screen. This allows for ultra-fine detail and exceptional print quality. The printer features a LightTurbo 3.0 system with a powerful COB light source, enabling uniform and efficient curing across the entire build platform. With a build volume of 223 x 126 x 230 mm, automatic bed leveling, and smart features like print failure detection, the Photon Mono M7 is designed for both precision and reliability. Additionally, it comes with the AirPure air purifier, ensuring a cleaner printing environment.Highlights223 x 126 x 230mm Build Volume90mm/h for Even Standard ResinThe All-New LighTurbo 3.0Intelligent Workflow-Assist Printing