Consumables

3DLAC Adhesive Spray is a high-performance solution designed to ensure optimal adhesion between your 3D printers heated bed and the first layer of your print. Specially formulated for FDM/FFF 3D printing, this spray prevents common issues like warping and shifting, delivering consistent and reliable results across a wide range of materials. Please Note This product is currently available for shipping within Sweden only.Key FeaturesUltra-fast drying time touch-dry in just 10 seconds.Provides strong adhesion for PLA, ABS, PETG, and more.Compatible with glass, aluminum, and mirror surfaces.Each 400ml can offers approximately 400 uses.Easily cleaned with water or isopropyl alcohol.

3DLAC Stick is the practical solution for securing your 3D prints to the build plate, especially when printing with common materials like PLA, PETG, or ABS. With its compact and mess-free stick format, it provides reliable adhesion while making post-print removal easy and clean. Ideal for both beginners and experienced makers, 3DLAC Stick helps you achieve warp-free results with minimal effort. Highlights Mess-free and easy-to-apply glue stick format Ensures strong adhesion and prevents warping Simplifies part removal after cooling Works well with PLA, PETG, ABS, and more No strong odors or harsh chemicals Perfect for glass and other build surfaces

Super Lube Multi-Use Synthetic Oil with Syncolon® (PTFE) is a high-quality, food-grade synthetic lubricant that bonds to surfaces of moving parts to reduce friction, wear, rust, and corrosion, extending equipment longevity. It performs reliably across a wide temperature range, is safe on various materials, and ideal for use in demanding environments. Key Features Contains suspended Syncolon® (PTFE) particles for enhanced lubrication Wide operating temperature from –43 °C to +232 °C Protects against friction, wear, rust, and corrosion NSF H1 food-grade—safe for incidental food contact Dielectric, clean, environmentally friendly, Kosher certified Compatible with metal, plastic, wood, leather, painted surfaces, rubbers

Super Lube® Synthetic Lightweight Oil has a lower viscosity than Super Lube® Multi-Purpose Synthetic Oil with PTFE and can replace conventional 8–10 cSt oils. It is ideal for spraying, dripping, and as a food grade chain lubricant and rust preventative. Classified as ISO Class 68, it operates across a wide temperature range of -40°C to 260°C. Key Features Lower viscosity than Multi-Purpose Oil with PTFE Suitable replacement for conventional 8–10 cSt oils Ideal for spraying and drip lubrication Food grade chain lubricant and rust preventative ISO Class 68 Temperature range -40°C to 260°C

The Bambu Lab Liquid Glue is a specially developed adhesive for 3D printing that ensures consistent first-layer adhesion while being easy to apply and clean. Its water-based, low-odor formula works seamlessly across all Bambu Lab build plates and is compatible with a wide range of materials. Say goodbye to print failures and tedious cleanup. Key Features: • Water-based, low-odor glue safe for all plate types • Supports PLA, ABS, PETG, PET, TPU, ASA with reliable adhesion • Provides smooth, uniform layer without glue-stick clumps • Easy to apply evenly via applicator head • Washes off effortlessly from plates and prints • Prevents warping and print detachment across hotbed cycles

The Super Lube® Multi-Use Synthetic Oil with Syncolon® (PTFE) is a high-quality synthetic oil formulated with PTFE micro-particles to bond onto moving surfaces and deliver lasting protection. It reduces friction, wear and corrosion, works effectively in a wide temperature range (-43 °C to +232 °C) and is safe for incidental food contact and sensitive components. Key highlights Synthetic oil with Syncolon® (PTFE) micro-particles NSF H1 food-grade certified for incidental food contact Effective from approximately -43 °C to +232 °C Provides strong protection against rust and corrosion Compatible with metal, plastic, wood, leather and most rubbers Ideal for precision equipment including 3D-printer rods and linear guides

The Super Lube® Super Kleen (NSF A1 Cleaner) is a high-strength, solvent-free cleaner and degreaser designed to remove grease, oil, ink and grime from virtually any water-safe surface. With food-safe NSF A1 certification it is suitable for use around food-processing areas, while still being tough enough for industrial equipment and precision machines. Key highlights Industrial-strength, multi-purpose cleaner and degreaser Solvent-free, non-flammable and safe to use on water-safe surfaces NSF A1 certified for use in and around food-processing zones Effective full strength or diluted to suit light cleaning tasks Safely removes grease, oil, ink and grime from metals, plastics, painted surfaces and more Well suited for cleaning 3D-printer rods, frames, linear guides and mechanical components

Enjoy the benefits of two different textures in one plate, one side is Textured PEI surface and the other side is Smooth PEI surface. This Plate features a 0.5mm magnetic stainless steel plate that enhances magnetic adhesion and helps to prevent warping and ensure optimal print quality during 3D printing.HighlightsEffortless print removalImproved durabilityHigh Z-axis precision printingSmooth and matte surface

The Bambu Smooth PEI Plate features a 0.125 mm smooth PEI surface laminated onto a 0.5 mm spring steel base, ensuring exceptional adhesion, durability, and precise first-layer aesthetics. Compatible with multiple filaments, it provides reliable performance for both standard and high-temperature materials. Key Features 0.125 mm smooth PEI sheet bonded to 0.5 mm spring steel Robust magnetic adhesion minimizes warping risk Matte finish delivers smooth, low-layer lines on prints Works with PLA, PETG, TPU, ABS, Nylon and more Enhances Z-axis precision for tight fit and tolerance Easy to mount, maintain, and compatible with X1/P1/A1 series

Compatible with P1P, P1S, X1, X1C, X1E, A1 The Bambu Lab Double Sided PEI Build Plate is a high-quality printing surface designed for 3D printing enthusiasts. Made from Polyetherimide (PEI) and featuring a double-sided design, this build plate offers excellent adhesion and durability, ensuring that your 3D prints are accurate and consistent. Double-sided design for added value and convenience High-quality Polyetherimide (PEI) material for superior printing surface Excellent adhesion for accurate and consistent 3D prints Durable construction for long-lasting use

The Super Lube® Silicone Lubricating Grease with Syncolon® (PTFE) (85 g / 3 oz tube) is a high-performance silicone-based grease enriched with PTFE micro-particles. It forms a durable, stable film that resists wear, friction, moisture and corrosion, and is compatible with plastics and rubbers. Ideal for precision mechanisms, seals and moving parts in demanding environments. Key highlights Silicone-based grease with Syncolon® (PTFE) micro-powder Will not harden, dry-out or melt under normal use Wide service temperature range and excellent water resistance Compatible with most rubbers, plastics and metals Prevents rust and corrosion whilst dampening noise Suitable for seals, O-rings, guide rods, bearings and 3D-printer components

PrimaCreator Flexplate is the upgrade your printer deserves. With its Powder Coated PEI it is the perfect surface to print on, its very durable and easy to manage. When finished printing you model, you can easily remove the print from the plate and continue with your next project.HighlightsCompatible with Bambu Lab A1 MiniMagnetic and flexibleVery Easy to useStrong and durable

The Super Lube® Multi-Purpose Synthetic Grease with Syncolon® (PTFE), in the 85 g size, is a premium synthetic grease designed for heavy-duty lubrication. Its PTFE-based micro-powder additive and synthetic base oils reduce friction, wear and corrosion across a wide temperature range (-43 °C to +232 °C). This grease is dielectric, food-grade certified and made to last in demanding applications. Key highlights Patented synthetic grease with Syncolon® (PTFE) micro-powder NSF H1 food-grade certified for incidental food contact Effective operating range from approximately -43 °C to +232 °C Strong resistance against rust, corrosion, water and salt water Dielectric, clean and stable – will not melt, separate or form gummy residues Suitable for bearings, hardware, threaded rods and precision equipment including 3D-printer components

The Flexplate-Powder Coated PEI is the perfect surface to print on, it’s very durable and easy to manage. And best of all, thanks to the Flexible plate your prints will be very to remove. Just give it a small bend and the print will pop right off.Why should I use PrimaCreator FlexPlate-Powder Coated PEI?Magnetic and flexiblePEI is one of the best surfaces you can use for printingVery Easy to useFits most printersStrong and durable

The Flexplate-Powder Coated PEI is the perfect surface to print on, it’s very durable and easy to manage. And best of all, thanks to the Flexible plate your prints will be very to remove. Just give it a small bend and the print will pop right off.Why should I use PrimaCreator FlexPlate-Powder Coated PEI?Magnetic and flexiblePEI is one of the best surfaces you can use for printingVery Easy to useFits most printersStrong and durable

PrimaCreator nFEP Film Sheets combine the properties of FEP and PTFE to deliver an ultra low-stick surface for resin printing. The reduced adhesion lowers peel forces, helping to prevent parts from detaching from the build plate or sticking to the vat. Less force per lift also eases strain on the printer motor and on the film, extending service life. Each sheet offers high light transmittance and arrives protected on both sides. Key Features nFEP (FEP + PTFE) ultra low-stick surface Reduces peel force and failed prints Less strain on motor and film for longer life Smoother than standard FEP for print quality High light transmittance (~95%), protective films both sides 2-pack, 200×270 mm, 0.15–0.20 mm; fits ~9" LCD printers

The PrimaCreator nFEP Film Roll is a premium-quality consumable designed for resin 3D printers. Combining the properties of FEP and PTFE, nFEP provides a superior non-stick surface that reduces print failures and extends the lifespan of both the film and the printer’s mechanical components. With excellent light transmittance and durability, it is an essential upgrade for achieving consistent, high-quality results. Key Features Roll size: 30 × 160 cm Thickness: 0.15–0.2 mm High light transmittance of 95% Superior non-stick surface for fewer failed prints Longer lifespan compared to standard FEP films Can be cut to fit most resin 3D printers

The Copymaster3D Magnetic Build Surface is a reliable, budget-friendly interchangeable print surface cut precisely to 235 × 235 mm. With a soft magnetic backing and porous top layer, it offers fast warm-up, excellent first-layer adhesion, and easy print removal—no glue or tape needed. Key Features: • Precision cut 235 × 235 mm size fits many FDM printers • Flexible magnetic backing enables effortless print removal • Quick heating—warms faster than traditional glass • Deep porous texture promotes strong filament adhesion • Includes two-part system: top sheet + magnetic base • Compatible with printers like Ender 3, Ender 5 series, and more

The K2 Plus Epoxy Resin Build Plate provides a smooth and stable surface for 3D printing, ensuring strong adhesion and consistent print quality. Its durable epoxy resin construction enhances reliability, making it a great choice for various printer models. Key Features Excellent adhesion for reliable prints High flatness for consistent results Durable epoxy resin material Compatible with multiple printer models

The Super Lube® Multi-Purpose Synthetic Grease with Syncolon® (PTFE) is a premium synthetic grease designed for long-lasting protection in demanding applications. Engineered with a PTFE micro-powder additive and synthetic base oils, it resists wear, corrosion and friction across a wide temperature range from -43 °C to +232 °C. It is dielectric, food-grade certified and suitable for machines, 3D printers and general maintenance use. Key highlights Patented synthetic formula with Syncolon® (PTFE) micro-powder Rated for incidental food contact (NSF H1 certified) Operates from approximately -43 °C to +232 °C Excellent resistance to water, salt water and corrosion Stable film that will not melt, separate or form gummy deposits Suitable for bearings, threads, slides, chains and 3D printer rods

The PrimaCreator nFEP Film Sheets combine the benefits of FEP and PTFE to deliver an ultra-smooth, durable, and non-stick printing surface. Designed for longer life and higher print reliability, these sheets ensure consistent quality across a wide range of resin 3D printers using 5.5"-6.1" LCDs. Key Features 3 high-quality nFEP sheets per pack Combines FEP and PTFE for superior non-stick performance Minimizes print failures and reduces motor strain Smoother surface than standard FEP for optimal print quality High light transmittance (95%) for reliable curing Compatible with most 5.5"-6.1" LCD resin printers

PrimaCreator Super-PFA is a multi-layer PFA composite film developed for large size resin 3D-printers. The surface of SPFA effectively prevent electrostatic adsorption and adhesion, reducing the release force. This greatly improves the success rate when used in printers with bigger screens.FeaturesHigh quality PrimaCreator SPFA film sheets.Light Transmittance: 91-94%

Upgrade your 3D printing setup with the Copymaster3D Magnetic Build Surface cut to 310 × 310 mm. This high-quality, magnetic two-piece system provides fast heating and excellent adhesion with deep-porous texture, while keeping prints securely in place and easy to remove. Ideal as a replacement or upgrade for popular printers like CR 10, Anet, and Sidewinder X-series. Highlights Precisely cut 310 × 310 mm to fit most FDM printers Soft magnetic backing makes print removal effortless Faster heat-up compared to glass beds Deep pores enhance initial layer adhesion Includes top print surface and magnetic base layer Easy peel-off and reattach system—no tape or sprays needed

The Bambu Lab Vision Encoder brings a new level of calibration to your H2 series printer. By correcting mechanical variances and wear, it guarantees motion accuracy under 50 µm and ensures parts fit together precisely. With just a five-minute setup you can maintain high precision across large prints and demanding workflows. Key Features Compatible with H2 series (H2D / H2S) printers XY motion accuracy below 50 µm 10,000+ encoding markers and 5 µm optical resolution Distance-independent calibration, ideal for large print volumes Seamless integration with Bambu Studio Auto Hole-Contour Compensation Quick 5-minute calibration for weeks of consistent precision

The Bambu Lab Textured PEI Plate (H2D) brings robust adhesion and durability to your 3D printing workflow. It is engineered specifically for the H2 series of printers. Featuring a textured PEI surface bonded to a spring steel base, it offers strong first-layer grip and excellent release when cooled. It supports a wide range of materials and is built for reliability and ease of use. Key Features Textured PEI coating for excellent first-layer adhesion Spring steel base offers flexibility and durability Works with a wide range of filaments including PLA, PETG, ABS, PA, PC Designed for printers in the H2 series Adhesion during print and effortless release after cooling Scratch-resistant and warp-free build surface

Magigoo Flex is a specially designed adhesive pen optimized for flexible and rubber-filament 3D printing, including TPU, TPE, and other elastomers. It provides strong bed adhesion during printing and allows clean, tool-free part release once cooled—reducing issues like lifting or shifting. Ideal for flexible materials that typically struggle with first-layer stability. Key Features Specifically formulated for flexible materials like TPU and TPE Strong adhesion at heated build-plate temperatures Effortless part removal once cool Water-based, odorless, and non-toxic Pen applicator for precise, mess-free placement Easily cleans off with water—no scraping required

Magigoo Pro HT is a high-temperature adhesive pen tailored for advanced FDM/FFF printing with materials like PC, PEI, PEEK, and other engineering-grade filaments. It provides reliable first-layer adhesion on heated print beds (up to 160 °C) while allowing clean, tool-free removal once the plate cools. Perfect for demanding applications that require precision, strength, and durability. Key Features Formulated for high-temperature engineering plastics Strong hold at heated-bed temps up to 160 °C Quick “pop-off” release after cooling Water-based, non-toxic, and odor-free Pen applicator for precise, mess-free use Effortless clean-up with water—no residue or scraping