Filament Printers

The Bambu Lab A1 Mini 3D Printer is a game-changer in FDM 3D printing, redefining flow control. It utilizes a high-resolution, high-frequency eddy current sensor to precisely measure nozzle pressure. The A1 mini comes to you pre-assembled, pre-squared, and pre-tuned with precision. It only takes about 20 minutes to set up for your first print.HighlightsPlug-N-Play ConvenienceActive Flow Rate CompensationFull Auto CalibrationPrint SilentlyHigh-Speed PrecisionActive Flow Rate Compensation180 x 180 x 180 mm Maximum Build Volume

The Bambu Lab P1S is like its predecessor one of the front edge high-speed printers on the market. Enclosed with a proper cooling setup, the P1S enables better print performance with a wider range of advanced filaments. Furthermore, the P1S is equipped with an activated carbon filter to provide a solution for printing filaments such as ABS that are prone to emitting odors and harmful gases during the printing process.HighlightsIncludes the Automatic Material SystemUp to 20000 mm/s acceleration, prints a benchy in 18minWorks right out of the box, set up in 15 minutesEnclosed-body for high-temperature filament printingWell-polished hardware and software

The Bambu Lab P1S is like its predecessor one of the front edge high-speed printers on the market. Enclosed with a proper cooling setup, the P1S enables better print performance with a wider range of advanced filaments. Furthermore, the P1S is equipped with an activated carbon filter to provide a solution for printing filaments such as ABS that are prone to emitting odors and harmful gases during the printing process.HighlightsUp to 20000 mm/s acceleration, prints a benchy in 18minWorks right out of the box, set up in 15 minutesEnclosed-body for high-temperature filament printingWell-polished hardware and software

Unlock the full potential of your Bambu Lab 3D printer with the AMS (Automatic Material System). Engineered for seamless filament switching, the AMS enables advanced multi-color and multi-material printing without manual intervention - ideal for users who value efficiency, precision, and creativity.Key FeaturesSupports up to 4 filament spools per AMS unitEnables automatic multi-color and multi-material printing Expandable up to 16 spools with 4 AMS units in parallel Built-in humidity control keeps filament in optimal condition Intelligent filament detection and compatibility check Fully integrated with Bambu Lab X1 and P1 series printers

Bambu Lab A1 printer is a cutting-edge technology that revolutionizes the field of 3D printing. Powered by the latest advancements in additive manufacturing, this printer sets new standards in precision, speed, and versatility. With its sleek design and user-friendly interface, Bambu Lab A1 seamlessly integrates into any professional workspace or personal creative studio. Now featuring an upgraded and durable heatbed cable. The all-new AMS lite is elegant and reliable, making multi-color 3D printing accessible to everyone.HighlightsMulti-Color Printing256 x 256 x 256 mm Build VolumeFull-auto CalibrationActive Flow Rate Compensation1-Clip Quick Swap NozzleActive Motor Noise CancellingUpgraded heatbed cable

The Bambu Lab X1 Carbon 3D Printer is the ultimate tool for aspiring creators, artists, and engineers. With its cutting-edge technology and sleek design, this printer delivers unmatched precision, speed, and versatility. Equipped with a high-quality carbon fiber frame, the Bambu Lab X1 Carbon 3D Printer can effortlessly handle all your printing needs. Whether you are printing intricate models, molds, or prototypes, this printer delivers stunning results every time.Highlights:Includes the X1 Carbon Printer and the Automatic Material SystemMulti Color & Multi Material CapabilityHigh quality printing with 7 μm Lidar ResolutionUpgradeable and customizable flexibilityHigh speed CoreXY with 20000 mm/s² AccelerationDual Auto Bed Leveling

The Bambu Lab AMS Lite is a lightweight and cost-efficient filament management system designed for seamless multi-color and multi-material 3D printing. Compatible with selected Bambu Lab printers, it enables automatic filament switching with precision, while protecting your filament from humidity and dust.Key FeaturesSupports up to 4 filaments per AMS unitEnables automatic multi-color/material printingCompact and modular design Integrated filament detection and rewindingCompatible with PLA, PETG, TPU, ABS, ASA, and moreWorks with Bambu Lab A1 series (with splitter included)

Bambu Lab A1 printer is a cutting-edge technology that revolutionizes the field of 3D printing. Powered by the latest advancements in additive manufacturing, this printer sets new standards in precision, speed, and versatility. Now featuring a new and improved heatbed cable for enhanced durability, the Bambu Lab A1 seamlessly integrates into any professional workspace or personal creative studio.Highlights256 x 256 x 256 mm Build VolumeFull-auto CalibrationActive Flow Rate Compensation1-Clip Quick Swap NozzleActive Motor Noise CancellingUpgraded heatbed cable

The latest 3D printer Bambu Lab P1P inherits the proven kinematics and motion control system of the X1 series, as well as the rich sensors to ensure its reliability. It can connect the automatic material system (AMS) for multi-color printing. Great for beginners, professionals, or others who enjoy the fun of being creative, the P1P has been designed for easy setup and use in minutes. Additionally, it allows upgrading and customizing hardware with mod-friendly features for people to enjoy the fun of making their own one-of-a-kind 3D printer. Invest in the Bambu Lab P1P 3D Printer today and start bringing your ideas to life!Highlights:Out of the Box printing experience. Set up in 15 minutes.High-speed CoreXY structure with 20000 mm/s² acceleration.Upgradeable and customizable to make your unique printer. Multi-color capability.State-of-the-art electronics, including vibration compensation, pressure advance, Wifi connection, and camera.

The Bambu Lab A1 Mini 3D Printer is a game-changer in FDM 3D printing, redefining flow control. It utilizes a high-resolution, high-frequency eddy current sensor to precisely measure nozzle pressure. The A1 mini comes to you pre-assembled, pre-squared, and pre-tuned with precision. It only takes about 20 minutes to set up for your first print. Included in this combo-set is the all-new AMS lite which is elegant and reliable, making multicolor 3D printing accessible to everyone.HighlightsPlug-N-Play ConvenienceActive Flow Rate CompensationFull Auto CalibrationActive Motor Noise CancellingHigh-Speed PrecisionActive Flow Rate Compensation180 x 180 x 180 mm Maximum Build VolumeIncludes AMS Lite

The Creality Hi Combo introduces a new level of innovation for 3D printing enthusiasts, offering impressive features like multi-color printing, precise support removal, and ultra-fast print speeds. With user-friendly assembly and an all-metal frame, its designed for both beginners and advanced users seeking efficiency and quality.Key FeaturesPrint up to 16 colors with 4 CFS units (one included, additional sold separately)Easy removal of supports using multi-material printing95% pre-assembled for quick setupAll-metal frame for stability and styleDurable, clog-free nozzle with quick-swap capabilityHigh-speed printing with max acceleration of 12,000mm/s

Building on the success of the acclaimed Creality K1, the K1C is an enclosed Core XY FDM printer capable of speeds up to 600 mm/s. Designed to compete with the industrys top 3D printers, the K1C sets a new standard with its all-metal hotend, upgraded motor system, and innovative build plate. The K1Cs capabilities extend beyond PLA it is specifically optimized for the use of carbon fiber filament the C in K1C stands for carbon. In addition, the K1Cs hotend can reach and maintain temperatures of up to 300 degrees Celsius, and its direct drive system is engineered to process carbon fiber filament with exceptional proficiency.HighlightsBuild Volume 220 x 220 x 250mmClog-free All-metal Extruder Kit600mm/s Max Printing SpeedSupporting Carbon Fiber FilamentsObservant Al Camera

The Creality Hi is a high-performance 3D printer designed to deliver exceptional results with speed and accuracy. With a sturdy all-metal frame, advanced motor technology, and user-friendly features, its an excellent choice for creators seeking reliability and quality. The printer supports multi-color printing with up to four CFS units, available for purchase separately, making it adaptable for future upgrades.Key FeaturesCompatible with up to 4 CFS units for multi-color printing (sold separately)Supports easy removal of support structures using multi-material printing95% pre-assembled for a quick and hassle-free setupDurable tri-metal nozzle for clog-free performanceStable all-metal frame for consistent print qualityHigh-speed printing with max acceleration of 12,000mm/s

The K2 Plus Combo revolutionizes 3D printing with its intelligent CFS unit,, enabling multi-color printing and automatic filament backup. As the pinnacle of Crealitys 2nd generation K series, the K2 Plus boasts an expansive build volume of 350 x 350 x 350mm. It is equipped with the cutting-edge APUS extruder, a closed-loop motor system, and an active chamber heater, among other advanced features. Experience unparalleled precision and versatility with the K2 Plus Combo, setting new standards in 3D printing technology. HighlightsSupports Multi-Color Printing With Up to 16 Colors Using 4 CFSDirect Drive ExtruderTilt Detection350x350x350mm Build Volume600mm/s Maximum Printing Speed

The Anycubic Kobra S1 is a fully enclosed 3D printer designed for speed, precision, and ease of use. With a maximum print speed of 600mm/s, a quiet printing mode, and compatibility with a wide range of filaments, its perfect for both beginners and experienced users who value performance and convenience.HighlightsFully enclosed CoreXY design, 250250250mm print volume 600mm/s ultra-fast printing with 20000mm/s acceleration320 hotend with easy disassembly and anti-clogging features Compatible with ASA, ABS, PLA, TPU, PETG filamentsQuiet operation as low as 44dB in quiet modeIncludes Anycubic Slicer Next and app for advanced control

Just like the K1 printer, K1 Max reaches new levels of printing speed but with the large build volume of 300 x 300 x 300mm. K1 Max uses an AI camera to watch over spaghetti failure, foreign objects, debris, etc. It will alert you when an error occurs.Highlights:600mm/s Printing SpeedVersatile AI LiDARObservant AI CameraLarge Build Volume：300*300*300mm

The Bambu Lab X1 Carbon 3D Printer is the ultimate tool for aspiring creators, artists, and engineers. With its cutting-edge technology and sleek design, this printer delivers unmatched precision, speed, and versatility. Equipped with a high-quality carbon fiber frame, the Bambu Lab X1 Carbon 3D Printer can effortlessly handle all your printing needs. Whether you are printing intricate models, molds, or prototypes, this printer delivers stunning results every time.Highlights:Multi Color & Multi Material CapabilityHigh quality printing with 7 μm Lidar ResolutionUpgradeable and customizable flexibilityHigh speed CoreXY with 20000 mm/s² AccelerationDual Auto Bed Leveling

The CR-10 SE is the latest Creality FDM 3D printer aimed at advanced users. The new printer solves the problem of getting the ideal first layer by auto-leveling using multiple sensors upon startup. It also features a model cooling fan to prevent distorted overhangs and can print at up to 600 mm/s.Highlights600 mm/s Max Printing SpeedHands-free Auto LevelingLinear Rails at X & Y-AxisDedicated Model Cooling FanHotend with 60W Ceramic Heater

CFS is an advanced filament management system designed to enhance your 3D printing experience. With features like automatic filament identification, smooth material switching, and moisture-proof storage, it ensures high-quality prints with minimal waste and interruptions.Key FeaturesSupports 16 colors for creative printingSnap-away or water-soluble support materialIntelligent sensors for optimized performanceAutomatic filament detection and managementMoisture-proof storage for better filament longevityIncludes essential accessories for setup

Creality Ender-3 V3 is an updated version of the popular Ender-3 3D printer from Creality. This budget-friendly desktop 3D printer offers a fast and stable printing experience, making it ideal for both beginners and experienced users.HighlightsCoreXZ for 600mm/s Printing SpeedBuild Volume 220 x 220 x 250mmStable Metal Build with Die-cast PartsIntegrated Tri-metal Nozzle, Quick to SwapTwo Mighty Fans for Instant CoolingAuto Calibration for Leveling and More

The Creality K2 Plus is an advanced FDM 3D printer designed for precision, speed, and versatility, making it ideal for demanding projects. With a large 350 x 350 x 350 mm build volume, the K2 Plus enables users to create large-format models or multiple smaller items in a single run. The printer is compatible with the CFS (not included), making multi-color printing possible.Highlights350 x 350 x 350mm Build VolumeDirect Drive Apus all-metal extruderTilt Detection600mm/s Maximum Printing Speed

The Forge 1 is part of the Raise3D MetalFuse full metal solution (including the D200 – E debinding device and S200 – C vacuum sinter) developed in cooperation with BASF and Forward AM as material partners. Metal-filled filament is printed on the Forge 1, and resulting green parts must go through debinding and sintering processes before being ready for use.Highlights:Massive build areaTime-effective technologyImproved printout densityEnvironmentally friendly production

The Flashforge Guider 3 Ultra surpasses its predecessors in both speed and convenience to create an even better printing experience for its users. With the incredible maximum printing speed of 500mm/s, prints can be done in no time while still offering good quality. These improved features of Guider 3 Ultra together with other popular Flashforge-features is what makes this printer a cost-effective choice for small batch production.Highlights:Dual ExtrudersAuto-LevelingMaximum Extruder Temperature: 350°CMaximum Printing Speed: 500mm/s

D600 Pro 2 is a brand-new product based on D600 Pro that is now being released with more advanced design concepts and deep technical reserves. It has been professionally designed, has powerful performance, and features no shortcomings. Large print volume, faster speed, stronger material compatibility, simpler operating procedures, and more stable 7/24 operation. Undoubtedly, it will capture the needs of all professional 3D printer users within 600mm3 size worldwide.Highlights600 x 600 x 600 mm420°C+100°C+70°CHigh resolution & speedRemovable Magnetic PlatformReliable 24/7Fully enclosed

D1000 is upgraded from the model F1000. With a build volume of over 1000 x 1000 x 1000mm, it is the perfect machine for creating large and full size parts, prototype, tools, molds, jigs & fixtures in-house. Within days you can have a fully functional high quality prototype. CreatBot big rolls filament of PLA, ABS, ASA, PA-CF, etc suit well for your big models without worrying frequent replacement of filament. All its features manufactured to the highest standards. Every time, every parts, no mistake.Build Volume 1000 x 1000 x 1000 mmAuto-rising Dual Extruders 420°CHigh Resolution & SpeedCamera Control TechnologyFully EnclosedReliable 24/7

Build volume: 350 x 350 x 350 mm BTT Octopus v1.1 Control Board High-quality components Quality Sourced Parts (See BOM) *Doesn’t Include Raspberry Pi or Printed Parts* V6 Hotend with Bowden Setup

FLSun S1 features a build volume of 320 x 320 x 430 mm and is focused on high-speed printing – claiming a max speed of 1,200 mm/s, acceleration of up to 40,000 mm/s, and a volumetric flow rate of 110 mm. The S1 also leverages a closed-loop stepper motor system and an all-metal hot end rated to 350 °C. Theres also microtac radar, which works to improve print quality, accuracy, flow, and prints first layers.Highlights1200mm/s Max Speed and 40000mm/s Acceleration 320 x 320 x 430 mm Large Build VolumeMicrotac Radar to Control Printing Quality and AccuracyAll Metal Hotend can Reach to 350°CEquipment Self-check to Maintain Printer Stability

Artisan is Snapmakers latest generation of 3-in-1 3D printer. Larger, stronger, and more accessible than ever, it's going to be your next desktop powerhouse.Highlights:300C dual extrusion 3D printing10W high power laser engraving and cutting200W CNC carving and cutting400 400 400 large work areaFree 3-in-1 software: Snapmaker LubanLaser-proof enclosure included

Realize impressive results with the Raise3D Pro2 Plus Dual Extruder 3D printer. Raise3D stands for the production of high quality, reliable and affordable manufacturing machines. This 3D printer enables you to produce small series and prototypes. Join Additive Manufacturing now. Main product features:Precise control of the building platform via touch screenLarge building chamber: 305 x 305 x 600 mmIntegrated filament sensor & cameraInnovative air supply for clean air

3D print with the CreatBot D600 Pro very large and complex parts and objects. The D600 Pro is an industrial high temperature 3D printer with a very high manufacturing quality and enormously large heated installation space (60x60x60 cm). Use it to produce high-quality and sophisticated components additive. Main features of the CreatBot D600 Pro 3D printer:Extruder heatable to 260°C hotend(left) and 420°C hotend(right), heated construction platform and construction chamber heated to 70 ° C – Minimized warpingExtremely large installation space of 600x600x600 mm & industrial extruder guide for optimum qualitySimple control via 4.3" touch display & warm filament drying chamberSet 3D prints after a power outage easily – save costs, time and nerves

The CreatBot F430 is a low cost high temperature 3D printer for additive manufacturing with PEEK filament and other high performance materials that require high extrusion temperatures. Use it to process industrial filament with an extruder temperature of up to 420 ° C and a maximum installation space temperature of 70 °C..Product properties CreatBot F430:Up to 70 ° C heated installation space minimizes warping3D print PEEK, nylon, PC and other high temperature filaments – 420 C° heatable hot endPower failure backup to easily resume your 3D prints continuouslyAutomatic levelling and adjustment of the construction platform