Creality Space π Filament Dryer

Consistent drying while printing

The Space π Dry Box uses a double 360 degree hot air system that circulates heat evenly inside the chamber. This helps dry filament efficiently and prevents issues that can come from moisture in the material. At the core is a 110-watt PTC heating element, known for being both durable and energy-efficient.

Touchscreen controls

On the front of the unit, there’s a 3.7 inch LCD touchscreen. It shows useful info like the drying timer, current temperature, and humidity level. The interface is simple and makes it easy to keep track of the drying process.

Custom settings for different filaments

There are 12 temperature presets for different types of filament, but you can also set the temperature manually between 45 and 70 degrees. The timer is adjustable from 0 to 48 hours, depending on your needs. If you’re using high-speed machines or Hyper series filament, the dry box is fully compatible.

Smart restart after power loss

If the power goes out, the Space Pi remembers your last settings. That means you don’t need to re-enter everything once power is restored.

Additional details

It works with both 1.75 mm and 2.85 mm filaments, and you can easily switch between Celsius and Fahrenheit. There’s a power switch for safety and a silicone plug to keep moisture out. The dry box runs on 220V and has a rated power of 145W. It fits spools up to 20 cm in diameter and 7.9 cm in width.