Spare Parts & Accessories

Wet 3D printing filament can result in stringing clogging, poor adhesion and layer shifting, this these problems will be more obvious in high-speed printing scenarios. The Creality Space π Filament Dryer solves these issues by drying the filament during the printing process itself, enhancing your 3D model quality and minimizing the influence of external environmental factors.HighlightsAdjustable Temperature 45°C - 70°C360° PTC Hot-air HeatingOne-key set for 12 Filaments

Wet 3D printing filament can result in stringing, clogging, poor adhesion, and layer shifting. The Creality Spcae Pi Filament Dryer Plus solves these issues by drying the filament during the printing process itself, enhancing your 3D model quality and minimizing the influence of external environmental factors on the printing of 3D filaments.HighlightsTwo rolls capacity, double dryingAdjustable temperature 45-70Real-time humidity&temperature monitoringDrying time setting 0-48h360° hot-air heatingOne-key set for 12 filaments

Buy this FEP Film for your Anycubic Photon Mono.Anycubic Photon Mono FEP FilmFEP FilmFits Anycubic Photon

5-Pack of high quality PrimaCreator FEP film sheets. PrimaCreator FEP film sheets are made of high quality material to ensure high light transmittance and good reliability. To protect the sheets from wrinkles and scratches, each sheet comes with a protective film on both sides and are packaged in a protective envelope. The sheets fits most 3D-printers using 5,5"-6,1" LCDs.

Roll of high quality PrimaCreator FEP film. PrimaCreator FEP film sheets are made of high material to ensure high light transmittance and good reliability. To protect the sheet from wrinkles and scratches, each sheet comes with a protective film on both sides and are packaged in a sturdy cardboard tube. This sheet can easily be cut to fit almost any 3D-printer.

Sealing your filament spools in a vacuum sealed bag is a great way to protect them. The bags stops dirt, dust and most importantly - moisture for getting to your filament. Keeping your filament sealed and dry is the best way to protect it and preserve it's properties. This is especially true for hygroscopic filaments such as Nylon (PA) and PVA.Features5x Vacuum Bags - 350 x 310 mm (Suitable for most 1 kg filament spools)10x Humidity Indicators10x Silica Gel Bags

PrimaCreator Super-PFA is a multi-layer PFA composite film developed for large size resin 3D-printers. The surface of SPFA effectively prevent electrostatic adsorption and adhesion, reducing the release force. This greatly improves the success rate when used in printers with bigger screens.FeaturesHigh quality PrimaCreator SPFA film sheets.Light Transmittance: 91-94%

PrimaCreator Super-PFA is a multi-layer PFA composite film developed for large size resin 3D-printers. The surface of SPFA effectively prevent electrostatic adsorption and adhesion, reducing the release force. This greatly improves the success rate when used in printers with bigger screens.FeaturesHigh quality PrimaCreator SPFA film sheets.Light Transmittance: 91-94%

E3D & Bambu Lab ObXidian High Flow HotEnds are an official collaboration between E3D and Bambu Labs, bringing you one of the most compact, lightweight and, more importantly, performant HotEnds to date.Highlights60% additional flowrate when compared to the standard Bambu hotend!Drop-in replacement HotEnd for Bambu X1 and P1 SeriesCompatibility Bambu Lab X1, X1C (X1 Carbon), X1E, P1S, and P1PObXidian hardened tipped nozzleE3DLC coating offers additional non-stick propertiesOfficially Approved & Licensed Bambu product

The FlowTech Hotend is a new generation hotend line from Micro Swiss. Its unique design eliminates common hotend issues such as leaking nozzle seal and complex nozzle swaps. This edition is designed for Creality K1 and Older K1 Max.HighlightsLeak-Proof NozzleCold Nozzle ChangeHigh-Flow CharacteristicsAll-Metal Design300°C Max Temperature

The FlowTech Hotend is a new generation hotend line from Micro Swiss. Its unique design eliminates common hotend issues such as leaking nozzle seal and complex nozzle swaps.HighlightsLeak-Proof NozzleCold Nozzle ChangeHigh-Flow CharacteristicsAll-Metal Design300°C Max Temperature

The FlowTech Hotend is a new generation hotend line from Micro Swiss. Its unique design eliminates common hotend issues such as leaking nozzle seal and complex nozzle swaps.HighlightsLeak-Proof NozzleCold Nozzle ChangeHigh-Flow CharacteristicsAll-Metal Design300°C Max Temperature

The FlowTech Hotend is a new generation hotend line from Micro Swiss. Its unique design eliminates common hotend issues such as leaking nozzle seal and complex nozzle swaps.HighlightsLeak-Proof NozzleCold Nozzle ChangeHigh-Flow CharacteristicsAll-Metal Design300C Max Temperature

This is an all metal hotend upgrade kit for MK10 style extruders.FeaturesFits on many printerseasy to install

The All Metal Hot-End from PrimaCreator is the perfect addition for your Creality 3D Printer. It's a very smart "drop in" conversion kit for your printer. You don't need to make any modifications to your printer and it's very easy to install in minutes! The cooling block don't have any thermal (PTFE) tube and this makes for a much faster cooling effect and a more stable control. • No modification to your printer • Heat break made from the best Titanium alloy • Better price • All metal design for best results *It will fit all printers from the Creality Ender 3/3 Pro (Not the V3 models) and 5/6 series and also the Creality CR-10/10S/S4/S5/Mini/CR-20 and CR-20 Pro

This is a drop in All Metal Conversion kit by Micro Swiss for CR-10 3D printers. It requires absolutely zero modification to your 3D printer to install. Our uniquely designed cooling block eliminates need for a thermal tube. By not having separate thermal tube inside cooling block, it allows for faster heat dissipation.Product features:All metal hotendZero modification to your 3D printerThermal heat break made from Titanium AlloyA well-defined melt zone

Comes with a Copper Plated Reprap M6 0,4 mm Nozzle.

Comes with a Copper Plated RepRap M6 0,4 mm Nozzle.

Buy your new PHAETUS DRAGONFLY HOT-END BMO for better print quality and more posibilitys.FeaturesAll-metal kit, with overall high temperature resistance up to 500 ℃The hot-end is mainly composed of copper alloy materialConical fitting of heat break and heatsink