Accessories

The PolyDryer Box from Polymaker is an efficient solution for the safe storage of filaments. The Dryer Box in modular design is excellently sealed and keeps moisture mercilessly away from your filament spools! HighlightsExcellent sealing performanceModular designVersatile compatibility

The PolyDryer from Polymaker is a 2-in-1 solution for the efficient drying and safe storage of filaments. The dryer in the modular design is excellently sealed and keeps moisture mercilessly away from your filament spools! A 360° air flow with 3 adjustable power levels ensures even, efficient drying of the materials. HighlightsModular Design - Add more boxes to protect all your spoolsSuperior Sealing - Ready to print without ever opening the boxEfficient Drying - 360° drying system to revive your spools

The Polymaker PolyDryer Dock is a modular drying solution designed to enhance the performance of the PolyDryer system. With flexible settings, powerful drying capabilities, and compatibility with PolyDryer Box and Box XL, it provides users with an efficient and expandable way to keep filament in optimal condition. Key Features 3 adjustable drying levels for different filament needs Flexible timer settings for complete control 360° drying system for consistent results Compatible with PolyDryer Box and PolyDryer Box XL Modular design for expanding and customizing drying setups Standalone dry unit for 3D printing filament Power adapter included: AC100-240V, 50/60Hz, DC24V/68W output

The EssCable UK Power Cable - C13 - 1.8 m is a mains lead with a UK plug (BS1363) to IEC C13 female connector, intended for general electronics like PCs, printers, and monitors. Key Features Length: 1.8 metres UK plug (BS1363) to IEC 320 C13 female Sonic welded PVC connectors 5A fuse in UK plug; 10A IEC connector rating 1-year warranty Rated for max ~70 °C operating temperature (not suitable for kettle use)

Smaller, lighter, and better than ever before, our Revo Micro HotEnd uses the smallest heatsink we’ve produced so far. Weighing in at only 30g, use Revo Micro to squeeze more speed performance from your motion system. Adaptable to Bowden or direct drive setups, Revo Micro is fully compatible with our Revo ecosystem, so you can easily change nozzles without tools or hot tightening at room temperature, using just your fingers. With an anodised black heatsink, not only does Revo Micro run cool – it looks cool, too. Designed for use with Revo Nozzles Works with a Revo HeaterCore for faster heat-ups Smallest and lightest HotEnd we’ve produced so far Titanium-like performance Ultra-lightweight construction for improved speed performance Compatible with popular 3D printers including Creality, Ender, Prusa, Anet, Biqu, Monoprice and many more

AESUB transparent is a self-vanishing dulling spray developed by scanning experts. It was developed for photogrammetry, Lidar and other colour capturing scanning methods. The spray evaporates within a few hours, meaning that there is no need for cleaning after scanning. Highlights:Transparent vanishing dulling sprayEliminates reflections without loss of color informationPerfrect cor 3D scanning, photo-grammetry, film & photographyThin & homogenous coatingFree of pigmentsNo cleaning required

Comes with a Copper Plated Reprap M6 0,4 mm Nozzle.

Revo CR is a drop-in upgrade for some of the most popular Creality 3D printers available, including the Creality CR-10 and Ender 3 series.

Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening – just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print. Compatible with Revo cold sides, including Revo Six, Revo Micro, and Revo Hemera No need to hot tighten – each Revo Nozzle is a factory-assembled nozzle and heatbreak in one Works with a Revo HeaterCore for faster heat-ups and greater efficiency than most HotEnds on the market Compatible with popular FDM 3D printers, such as Creality, Ender, Prusa, Anet, Biqu, Monoprice, and many more

The Phaetus Dragon ST HeatBreak Kit is a genuine replacement designed for the Dragon ST hotend. Made from a copper alloy with a nickel plating, it provides excellent thermal conductivity and wear resistance. The heatbreak ensures stable temperature separation between the hot and cold zones, reducing the risk of heat creep and improving print consistency. Perfect for maintaining reliable performance with engineering-grade materials. Key Features Original heatbreak kit for Dragon ST hotend Nickel-plated copper alloy for durability Excellent thermal conductivity Prevents heat creep and improves stability Optimized for engineering-grade filaments Easy to install as a replacement part

The Polymaker Polysher is a desktop post-processing unit designed to seamlessly smooth 3D printed models made with PolySmooth and PolyCast filaments. Utilizing Polymakers Layer-Free technology, it employs a fine mist of isopropyl alcohol (IPA) or ethanol to gently dissolve surface layer lines, resulting in a glossy, professional-quality finish. This compact and user-friendly device is ideal for creators seeking to enhance the aesthetic quality of their 3D prints without manual sanding or painting.Key FeaturesCompatible exclusively with PolySmooth and PolyCast filamentsEmploys Layer-Free technology for smooth, glossy surfacesSimple operation with adjustable misting time (10-40 minutes)Maximum part dimensions 150 mm diameter x 180 mm heightSafe design with airtight sealing and automatic shut-offRequires isopropyl alcohol or ethanol (70% or higher)

The Phaetus Voron Dragon HF is a high-performance, all-metal hotend designed for demanding 3D printing applications. With ultra-fine heatbreak insulation, rapid heating, and superb flow rate, it excels in precision and high-temperature use up to 500 °C. Fully compatible with E3D V6 setups, it ensures reliable and versatile performance. Key Features Ultra-thin 0.1 mm titanium heatbreak for exceptional thermal isolation Rigid support structure secures heatbreak under external forces Nozzle change without touching the heat block Copper alloy components for fast and stable heating Supports abrasive and high-temp filaments up to 500 °C Drop-in replacement for E3D V6 interface

The Phaetus Dragonfly HIC HF Integrated Welded Nozzle 0.4 mm is an original hardened-steel nozzle designed specifically for the Dragonfly HIC HF hotend. With its robust one-piece welded M6 construction, it provides optimal heat transfer, sealing and durability—ideal for high-performance, high-flow printing. Key Features Hardened steel, welded one-piece M6 nozzle Precisely 0.4 mm diameter for fine detail Exclusive to Dragonfly HIC HF hotend Superior heat transfer and leak resistance Exceptional wear resistance and longevity Designed for high-speed, high-performance printing

Phaetus Rapido Hot-End Ultra High Flow - Black

Copper alloy / hardened steel material, meet high temperature, wear-resistant material printing. Comes with a Copper Plated Reprap M6 0,4 mm Nozzle.

The Phaetus VORON Dragon ST is a high-quality, all-metal hotend optimized for precision 3D printing. Featuring a 0.1 mm titanium heatbreak, efficient copper alloy construction, and compatibility with V6-style mounts, it delivers fast heating, excellent thermal isolation, and broad filament support—rated up to 500 °C. Key Features Ultra-thin 0.1 mm titanium heatbreak with excellent thermal isolation Copper alloy core for rapid heating and efficient heat dissipation Reinforced rigid frame for stable performance and easy nozzle changes Polished internals (Ra 0.3) for smooth filament flow and fine detail Full-metal design with high-temp capability up to 500 °C Drop-in compatible with E3D V6, Prusa, Titan and BMG setups

The Phaetus Dragonfly HIC HF Integrated Welded Nozzle 0.6 mm is a high-performance hardened-steel nozzle tailored for high-speed 3D printing. Featuring a welded, one-piece M6 design, it delivers optimal thermal conductivity, wear-resistance, and extrusion precision for professional and industrial applications. Key Features Original 0.6 mm nozzle for Phaetus Dragonfly HIC HF hotends Made from hardened steel for superior durability Welded one-piece construction with M6 thread High thermal conductivity for consistent performance Designed for high-speed, precise extrusion Ideal for demanding and professional printing environments

The Phaetus Dragonfly HIC HF Integrated Welded Nozzle (0.8 mm) is a high-flow, welded hardened-steel nozzle designed for the Dragonfly HIC HF hotend. It delivers exceptional wear resistance, leak-free operation, and superior thermal performance for demanding printing environments. Key Features Welded, one-piece hardened steel construction for high strength and durability Optimized for high-volume extrusion in fast, industrial-grade printing Precise 0.8 mm diameter—ideal for large layer heights and rapid deposition Excellent thermal conductivity and sealing to prevent leaks Exclusively compatible with Phaetus Dragonfly HIC HF hotend

FeaturesAll V6 hotend interfacesPrusa I3 MK3/MK3STitan ExtrudersBMG Extruders

Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening – just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print. Compatible with Revo cold sides, including Revo Six, Revo Micro, and Revo Hemera No need to hot tighten – each Revo Nozzle is a factory-assembled nozzle and heatbreak in one Works with a Revo HeaterCore for faster heat-ups and greater efficiency than most HotEnds on the market Compatible with popular FDM 3D printers, such as Creality, Ender, Prusa, Anet, Biqu, Monoprice, and many more

Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening – just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print. Compatible with Revo cold sides, including Revo Six, Revo Micro, and Revo Hemera No need to hot tighten – each Revo Nozzle is a factory-assembled nozzle and heatbreak in one Works with a Revo HeaterCore for faster heat-ups and greater efficiency than most HotEnds on the market Compatible with popular FDM 3D printers, such as Creality, Ender, Prusa, Anet, Biqu, Monoprice, and many more

Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening – just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print. Compatible with Revo cold sides, including Revo Six, Revo Micro, and Revo Hemera No need to hot tighten – each Revo Nozzle is a factory-assembled nozzle and heatbreak in one Works with a Revo HeaterCore for faster heat-ups and greater efficiency than most HotEnds on the market Compatible with popular FDM 3D printers, such as Creality, Ender, Prusa, Anet, Biqu, Monoprice, and many more

The Phaetus Dragon HeatSink Blue is made from anodized aluminum and designed for Dragon hotends. It provides efficient heat dissipation to keep the hotend stable and helps prevent heat creep during longer prints. The blue anodized finish adds durability and a distinctive look. Key Features Original heatsink for Dragon hotends Anodized aluminum construction Efficient heat dissipation Helps prevent heat creep Durable blue anodized surface Easy to install as a replacement part