Accessories

Crealitys Space Pi Filament Dry Box helps keep your filament dry while youre printing. It gently heats the material to avoid problems like stringing, clogs, or bad layer adhesion. With an easy-to-use touchscreen and support for a wide range of filaments, its a handy addition to any 3D printing setup. HighlightsDries filament during the printing process360-degree air circulation with PTC heatingAdjustable temperature from 45 to 70 °CUp to 48-hour timer with one-touch presetsEasy-to-read 3.7-inch touchscreen displayRemembers settings after a power outage

Wet 3D printing filament can result in stringing, clogging, poor adhesion, and layer shifting. The Creality Spcae Pi Filament Dryer Plus solves these issues by drying the filament during the printing process itself, enhancing your 3D model quality and minimizing the influence of external environmental factors on the printing of 3D filaments. HighlightsTwo rolls capacity, double dryingAdjustable temperature 45-70Real-time humidity&temperature monitoringDrying time setting 0-48h360° hot-air heatingOne-key set for 12 filaments

The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-fit nuts are simply embedded into a blind or through hole.

The perfect solution for taking your laser engraving projects to the next level. This innovative enclosure provides a safe and controlled environment for your laser engraving machine, allowing you to work with peace of mind and precision. Experience improved results and enhanced efficiency with this must-have accessory for your laser engraving setup.HighlightsDustproof and SmokeproofEfficient Smoke ExhaustEasy to OperateProtect HealthSize 720 x 720 x 400mm

The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-fit nuts are simply embedded into a blind or through hole.

M2 + M3 + M4 + M5 Thread Inserts for your 3D printing parts. The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-in nuts are simply embedded into a blind or through hole.

The Creality SpacePi X4 Filament Dryer is designed to maintain the quality of your 3D printing filaments by keeping them dry and free from moisture. With an advanced drying system, this dryer ensures optimal performance for various types of filament, including PLA, ABS, and PETG, making it an essential tool for every 3D printer owner. Highlights Keeps filaments dry to avoid printing issues Compatible with multiple filament types, including PLA, ABS, and PETG Features a large drying capacity, handling up to 4 spools Adjustable temperature and drying time for flexibility Lightweight design for easy storage and transport Suitable for both home and professional use

The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-fit nuts are simply embedded into a blind or through hole.

The deburrer removes the protruding edges on the 3D printing component with little effort. This makes the metal deburrer perfect as a 3D printing tool and should not be missing from any 3D printing accessory kit.

The Creality K2 Plus Ceramic Heating Block Kit delivers fast, stable, and efficient heat transfer for high-performance 3D printing. Designed specifically for the Unicorn K2 Plus hotend, the kit combines advanced ceramic insulation with a robust heating element to ensure consistent temperature control, even at higher print speeds.Key FeaturesOptimized for Creality Unicorn K2 Plus hotendRapid and uniform heat distributionCeramic insulation reduces heat lossSupports high-speed and high-temp printingDurable and stable under long-term useEasy replacement and secure installation

The K2 Plus Epoxy Resin Build Plate provides a smooth and stable surface for 3D printing, ensuring strong adhesion and consistent print quality. Its durable epoxy resin construction enhances reliability, making it a great choice for various printer models. Key Features Excellent adhesion for reliable prints High flatness for consistent results Durable epoxy resin material Compatible with multiple printer models

Ruthex soldering tips for ruthex threaded inserts. The ruthex soldering tips can be used even more easily in 3D printing parts from 3D printers such as Anycubic, Creality or Prusa.

The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-fit nuts are simply embedded into a blind or through hole.

Specially designed for threaded inserts To create a perfect drill hole for. To obtain threaded inserts, drills of the appropriate size are required. Conventional drill sets do not accommodate these specific sizes, which is why we have developed drills that produce holes suitable for threaded inserts.

The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-fit nuts are simply embedded into a blind or through hole.

The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-fit nuts are simply embedded into a blind or through hole.

Dry your filament before use to get the best printing result. Avoid errors caused by air bubbles and reduce errors caused by warping and stringing. HighlightsAdjustable temperature 45-65°CReal-time humidity monitoringDrying time setting 0-24h360° hot-air heating

Comes with a Copper Plated Reprap M6 0,4 mm Nozzle.

The Phaetus Dragon ST HeatBreak Kit is a genuine replacement designed for the Dragon ST hotend. Made from a copper alloy with a nickel plating, it provides excellent thermal conductivity and wear resistance. The heatbreak ensures stable temperature separation between the hot and cold zones, reducing the risk of heat creep and improving print consistency. Perfect for maintaining reliable performance with engineering-grade materials. Key Features Original heatbreak kit for Dragon ST hotend Nickel-plated copper alloy for durability Excellent thermal conductivity Prevents heat creep and improves stability Optimized for engineering-grade filaments Easy to install as a replacement part

The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-fit nuts are simply embedded into a blind or through hole.

The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-fit nuts are simply embedded into a blind or through hole.

The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-fit nuts are simply embedded into a blind or through hole.

The Phaetus Voron Dragon HF is a high-performance, all-metal hotend designed for demanding 3D printing applications. With ultra-fine heatbreak insulation, rapid heating, and superb flow rate, it excels in precision and high-temperature use up to 500 °C. Fully compatible with E3D V6 setups, it ensures reliable and versatile performance. Key Features Ultra-thin 0.1 mm titanium heatbreak for exceptional thermal isolation Rigid support structure secures heatbreak under external forces Nozzle change without touching the heat block Copper alloy components for fast and stable heating Supports abrasive and high-temp filaments up to 500 °C Drop-in replacement for E3D V6 interface

The Phaetus Dragonfly HIC HF Integrated Welded Nozzle 0.4 mm is an original hardened-steel nozzle designed specifically for the Dragonfly HIC HF hotend. With its robust one-piece welded M6 construction, it provides optimal heat transfer, sealing and durability—ideal for high-performance, high-flow printing. Key Features Hardened steel, welded one-piece M6 nozzle Precisely 0.4 mm diameter for fine detail Exclusive to Dragonfly HIC HF hotend Superior heat transfer and leak resistance Exceptional wear resistance and longevity Designed for high-speed, high-performance printing

Phaetus Rapido Hot-End Ultra High Flow - Black

The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-fit nuts are simply embedded into a blind or through hole.

The Nebula Smart Kit from Creality combines speed and high quality with maximum flexibility. The kit consists of the Nebula Pad and the Nebula Camera, which are equipped with versatile functions to achieve the best printing results when used together.HighlightsHigh-Speed PrintingPrecise ControlRemote monitoring & recordingEasy Installation

Copper alloy / hardened steel material, meet high temperature, wear-resistant material printing. Comes with a Copper Plated Reprap M6 0,4 mm Nozzle.

The Phaetus VORON Dragon ST is a high-quality, all-metal hotend optimized for precision 3D printing. Featuring a 0.1 mm titanium heatbreak, efficient copper alloy construction, and compatibility with V6-style mounts, it delivers fast heating, excellent thermal isolation, and broad filament support—rated up to 500 °C. Key Features Ultra-thin 0.1 mm titanium heatbreak with excellent thermal isolation Copper alloy core for rapid heating and efficient heat dissipation Reinforced rigid frame for stable performance and easy nozzle changes Polished internals (Ra 0.3) for smooth filament flow and fine detail Full-metal design with high-temp capability up to 500 °C Drop-in compatible with E3D V6, Prusa, Titan and BMG setups

The Phaetus Dragonfly HIC HF Integrated Welded Nozzle 0.6 mm is a high-performance hardened-steel nozzle tailored for high-speed 3D printing. Featuring a welded, one-piece M6 design, it delivers optimal thermal conductivity, wear-resistance, and extrusion precision for professional and industrial applications. Key Features Original 0.6 mm nozzle for Phaetus Dragonfly HIC HF hotends Made from hardened steel for superior durability Welded one-piece construction with M6 thread High thermal conductivity for consistent performance Designed for high-speed, precise extrusion Ideal for demanding and professional printing environments

The Phaetus Dragonfly HIC HF Integrated Welded Nozzle (0.8 mm) is a high-flow, welded hardened-steel nozzle designed for the Dragonfly HIC HF hotend. It delivers exceptional wear resistance, leak-free operation, and superior thermal performance for demanding printing environments. Key Features Welded, one-piece hardened steel construction for high strength and durability Optimized for high-volume extrusion in fast, industrial-grade printing Precise 0.8 mm diameter—ideal for large layer heights and rapid deposition Excellent thermal conductivity and sealing to prevent leaks Exclusively compatible with Phaetus Dragonfly HIC HF hotend

FeaturesAll V6 hotend interfacesPrusa I3 MK3/MK3STitan ExtrudersBMG Extruders