Accessories

Crealitys Space Pi Filament Dry Box helps keep your filament dry while youre printing. It gently heats the material to avoid problems like stringing, clogs, or bad layer adhesion. With an easy-to-use touchscreen and support for a wide range of filaments, its a handy addition to any 3D printing setup. HighlightsDries filament during the printing process360-degree air circulation with PTC heatingAdjustable temperature from 45 to 70 °CUp to 48-hour timer with one-touch presetsEasy-to-read 3.7-inch touchscreen displayRemembers settings after a power outage

Wet 3D printing filament can result in stringing, clogging, poor adhesion, and layer shifting. The Creality Spcae Pi Filament Dryer Plus solves these issues by drying the filament during the printing process itself, enhancing your 3D model quality and minimizing the influence of external environmental factors on the printing of 3D filaments. HighlightsTwo rolls capacity, double dryingAdjustable temperature 45-70Real-time humidity&temperature monitoringDrying time setting 0-48h360° hot-air heatingOne-key set for 12 filaments

The perfect solution for taking your laser engraving projects to the next level. This innovative enclosure provides a safe and controlled environment for your laser engraving machine, allowing you to work with peace of mind and precision. Experience improved results and enhanced efficiency with this must-have accessory for your laser engraving setup.HighlightsDustproof and SmokeproofEfficient Smoke ExhaustEasy to OperateProtect HealthSize 720 x 720 x 400mm

Dry your filament before use to get the best printing result. Avoid errors caused by air bubbles and reduce errors caused by warping and stringing. HighlightsAdjustable temperature 45-65°CReal-time humidity monitoringDrying time setting 0-24h360° hot-air heating

Smaller, lighter, and better than ever before, our Revo Micro HotEnd uses the smallest heatsink we’ve produced so far. Weighing in at only 30g, use Revo Micro to squeeze more speed performance from your motion system. Adaptable to Bowden or direct drive setups, Revo Micro is fully compatible with our Revo ecosystem, so you can easily change nozzles without tools or hot tightening at room temperature, using just your fingers. With an anodised black heatsink, not only does Revo Micro run cool – it looks cool, too. Designed for use with Revo Nozzles Works with a Revo HeaterCore for faster heat-ups Smallest and lightest HotEnd we’ve produced so far Titanium-like performance Ultra-lightweight construction for improved speed performance Compatible with popular 3D printers including Creality, Ender, Prusa, Anet, Biqu, Monoprice and many more

The Creality K2 Plus Ceramic Heating Block Kit delivers fast, stable, and efficient heat transfer for high-performance 3D printing. Designed specifically for the Unicorn K2 Plus hotend, the kit combines advanced ceramic insulation with a robust heating element to ensure consistent temperature control, even at higher print speeds.Key FeaturesOptimized for Creality Unicorn K2 Plus hotendRapid and uniform heat distributionCeramic insulation reduces heat lossSupports high-speed and high-temp printingDurable and stable under long-term useEasy replacement and secure installation

The Copymaster3D Magnetic Build Surface is a reliable, budget-friendly interchangeable print surface cut precisely to 235 × 235 mm. With a soft magnetic backing and porous top layer, it offers fast warm-up, excellent first-layer adhesion, and easy print removal—no glue or tape needed. Key Features: • Precision cut 235 × 235 mm size fits many FDM printers • Flexible magnetic backing enables effortless print removal • Quick heating—warms faster than traditional glass • Deep porous texture promotes strong filament adhesion • Includes two-part system: top sheet + magnetic base • Compatible with printers like Ender 3, Ender 5 series, and more

Upgrade your 3D printing setup with the Copymaster3D Magnetic Build Surface cut to 310 × 310 mm. This high-quality, magnetic two-piece system provides fast heating and excellent adhesion with deep-porous texture, while keeping prints securely in place and easy to remove. Ideal as a replacement or upgrade for popular printers like CR 10, Anet, and Sidewinder X-series. Highlights Precisely cut 310 × 310 mm to fit most FDM printers Soft magnetic backing makes print removal effortless Faster heat-up compared to glass beds Deep pores enhance initial layer adhesion Includes top print surface and magnetic base layer Easy peel-off and reattach system—no tape or sprays needed

AESUB transparent is a self-vanishing dulling spray developed by scanning experts. It was developed for photogrammetry, Lidar and other colour capturing scanning methods. The spray evaporates within a few hours, meaning that there is no need for cleaning after scanning. Highlights:Transparent vanishing dulling sprayEliminates reflections without loss of color informationPerfrect cor 3D scanning, photo-grammetry, film & photographyThin & homogenous coatingFree of pigmentsNo cleaning required

The K2 Plus Epoxy Resin Build Plate provides a smooth and stable surface for 3D printing, ensuring strong adhesion and consistent print quality. Its durable epoxy resin construction enhances reliability, making it a great choice for various printer models. Key Features Excellent adhesion for reliable prints High flatness for consistent results Durable epoxy resin material Compatible with multiple printer models

Revo CR is a drop-in upgrade for some of the most popular Creality 3D printers available, including the Creality CR-10 and Ender 3 series.

Comes with a Copper Plated Reprap M6 0,4 mm Nozzle.

Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening – just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print. Compatible with Revo cold sides, including Revo Six, Revo Micro, and Revo Hemera No need to hot tighten – each Revo Nozzle is a factory-assembled nozzle and heatbreak in one Works with a Revo HeaterCore for faster heat-ups and greater efficiency than most HotEnds on the market Compatible with popular FDM 3D printers, such as Creality, Ender, Prusa, Anet, Biqu, Monoprice, and many more

The Phaetus Dragon ST HeatBreak Kit is a genuine replacement designed for the Dragon ST hotend. Made from a copper alloy with a nickel plating, it provides excellent thermal conductivity and wear resistance. The heatbreak ensures stable temperature separation between the hot and cold zones, reducing the risk of heat creep and improving print consistency. Perfect for maintaining reliable performance with engineering-grade materials. Key Features Original heatbreak kit for Dragon ST hotend Nickel-plated copper alloy for durability Excellent thermal conductivity Prevents heat creep and improves stability Optimized for engineering-grade filaments Easy to install as a replacement part

The Phaetus Voron Dragon HF is a high-performance, all-metal hotend designed for demanding 3D printing applications. With ultra-fine heatbreak insulation, rapid heating, and superb flow rate, it excels in precision and high-temperature use up to 500 °C. Fully compatible with E3D V6 setups, it ensures reliable and versatile performance. Key Features Ultra-thin 0.1 mm titanium heatbreak for exceptional thermal isolation Rigid support structure secures heatbreak under external forces Nozzle change without touching the heat block Copper alloy components for fast and stable heating Supports abrasive and high-temp filaments up to 500 °C Drop-in replacement for E3D V6 interface

The Phaetus Dragonfly HIC HF Integrated Welded Nozzle 0.4 mm is an original hardened-steel nozzle designed specifically for the Dragonfly HIC HF hotend. With its robust one-piece welded M6 construction, it provides optimal heat transfer, sealing and durability—ideal for high-performance, high-flow printing. Key Features Hardened steel, welded one-piece M6 nozzle Precisely 0.4 mm diameter for fine detail Exclusive to Dragonfly HIC HF hotend Superior heat transfer and leak resistance Exceptional wear resistance and longevity Designed for high-speed, high-performance printing

Phaetus Rapido Hot-End Ultra High Flow - Black

Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening – just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print. Compatible with Revo cold sides, including Revo Six, Revo Micro, and Revo Hemera No need to hot tighten – each Revo Nozzle is a factory-assembled nozzle and heatbreak in one Works with a Revo HeaterCore for faster heat-ups and greater efficiency than most HotEnds on the market Compatible with popular FDM 3D printers, such as Creality, Ender, Prusa, Anet, Biqu, Monoprice, and many more

The Nebula Smart Kit from Creality combines speed and high quality with maximum flexibility. The kit consists of the Nebula Pad and the Nebula Camera, which are equipped with versatile functions to achieve the best printing results when used together.HighlightsHigh-Speed PrintingPrecise ControlRemote monitoring & recordingEasy Installation

Copper alloy / hardened steel material, meet high temperature, wear-resistant material printing. Comes with a Copper Plated Reprap M6 0,4 mm Nozzle.

The Phaetus VORON Dragon ST is a high-quality, all-metal hotend optimized for precision 3D printing. Featuring a 0.1 mm titanium heatbreak, efficient copper alloy construction, and compatibility with V6-style mounts, it delivers fast heating, excellent thermal isolation, and broad filament support—rated up to 500 °C. Key Features Ultra-thin 0.1 mm titanium heatbreak with excellent thermal isolation Copper alloy core for rapid heating and efficient heat dissipation Reinforced rigid frame for stable performance and easy nozzle changes Polished internals (Ra 0.3) for smooth filament flow and fine detail Full-metal design with high-temp capability up to 500 °C Drop-in compatible with E3D V6, Prusa, Titan and BMG setups

The Phaetus Dragonfly HIC HF Integrated Welded Nozzle 0.6 mm is a high-performance hardened-steel nozzle tailored for high-speed 3D printing. Featuring a welded, one-piece M6 design, it delivers optimal thermal conductivity, wear-resistance, and extrusion precision for professional and industrial applications. Key Features Original 0.6 mm nozzle for Phaetus Dragonfly HIC HF hotends Made from hardened steel for superior durability Welded one-piece construction with M6 thread High thermal conductivity for consistent performance Designed for high-speed, precise extrusion Ideal for demanding and professional printing environments

The Phaetus Dragonfly HIC HF Integrated Welded Nozzle (0.8 mm) is a high-flow, welded hardened-steel nozzle designed for the Dragonfly HIC HF hotend. It delivers exceptional wear resistance, leak-free operation, and superior thermal performance for demanding printing environments. Key Features Welded, one-piece hardened steel construction for high strength and durability Optimized for high-volume extrusion in fast, industrial-grade printing Precise 0.8 mm diameter—ideal for large layer heights and rapid deposition Excellent thermal conductivity and sealing to prevent leaks Exclusively compatible with Phaetus Dragonfly HIC HF hotend

FeaturesAll V6 hotend interfacesPrusa I3 MK3/MK3STitan ExtrudersBMG Extruders

Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening – just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print. Compatible with Revo cold sides, including Revo Six, Revo Micro, and Revo Hemera No need to hot tighten – each Revo Nozzle is a factory-assembled nozzle and heatbreak in one Works with a Revo HeaterCore for faster heat-ups and greater efficiency than most HotEnds on the market Compatible with popular FDM 3D printers, such as Creality, Ender, Prusa, Anet, Biqu, Monoprice, and many more

Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening – just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print. Compatible with Revo cold sides, including Revo Six, Revo Micro, and Revo Hemera No need to hot tighten – each Revo Nozzle is a factory-assembled nozzle and heatbreak in one Works with a Revo HeaterCore for faster heat-ups and greater efficiency than most HotEnds on the market Compatible with popular FDM 3D printers, such as Creality, Ender, Prusa, Anet, Biqu, Monoprice, and many more

The Phaetus Dragon HeatSink Blue is made from anodized aluminum and designed for Dragon hotends. It provides efficient heat dissipation to keep the hotend stable and helps prevent heat creep during longer prints. The blue anodized finish adds durability and a distinctive look. Key Features Original heatsink for Dragon hotends Anodized aluminum construction Efficient heat dissipation Helps prevent heat creep Durable blue anodized surface Easy to install as a replacement part