Accessories

Crealitys Space Pi Filament Dry Box helps keep your filament dry while youre printing. It gently heats the material to avoid problems like stringing, clogs, or bad layer adhesion. With an easy-to-use touchscreen and support for a wide range of filaments, its a handy addition to any 3D printing setup. HighlightsDries filament during the printing process360-degree air circulation with PTC heatingAdjustable temperature from 45 to 70 °CUp to 48-hour timer with one-touch presetsEasy-to-read 3.7-inch touchscreen displayRemembers settings after a power outage

The PolyDryer Box from Polymaker is an efficient solution for the safe storage of filaments. The Dryer Box in modular design is excellently sealed and keeps moisture mercilessly away from your filament spools! HighlightsExcellent sealing performanceModular designVersatile compatibility

Wet 3D printing filament can result in stringing, clogging, poor adhesion, and layer shifting. The Creality Spcae Pi Filament Dryer Plus solves these issues by drying the filament during the printing process itself, enhancing your 3D model quality and minimizing the influence of external environmental factors on the printing of 3D filaments. HighlightsTwo rolls capacity, double dryingAdjustable temperature 45-70Real-time humidity&temperature monitoringDrying time setting 0-48h360° hot-air heatingOne-key set for 12 filaments

The PolyDryer from Polymaker is a 2-in-1 solution for the efficient drying and safe storage of filaments. The dryer in the modular design is excellently sealed and keeps moisture mercilessly away from your filament spools! A 360° air flow with 3 adjustable power levels ensures even, efficient drying of the materials. HighlightsModular Design - Add more boxes to protect all your spoolsSuperior Sealing - Ready to print without ever opening the boxEfficient Drying - 360° drying system to revive your spools

The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-fit nuts are simply embedded into a blind or through hole.

The Polymaker PolyDryer Dock is a modular drying solution designed to enhance the performance of the PolyDryer system. With flexible settings, powerful drying capabilities, and compatibility with PolyDryer Box and Box XL, it provides users with an efficient and expandable way to keep filament in optimal condition. Key Features 3 adjustable drying levels for different filament needs Flexible timer settings for complete control 360° drying system for consistent results Compatible with PolyDryer Box and PolyDryer Box XL Modular design for expanding and customizing drying setups Standalone dry unit for 3D printing filament Power adapter included: AC100-240V, 50/60Hz, DC24V/68W output

The perfect solution for taking your laser engraving projects to the next level. This innovative enclosure provides a safe and controlled environment for your laser engraving machine, allowing you to work with peace of mind and precision. Experience improved results and enhanced efficiency with this must-have accessory for your laser engraving setup.HighlightsDustproof and SmokeproofEfficient Smoke ExhaustEasy to OperateProtect HealthSize 720 x 720 x 400mm

The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-fit nuts are simply embedded into a blind or through hole.

The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-fit nuts are simply embedded into a blind or through hole.

M2 + M3 + M4 + M5 Thread Inserts for your 3D printing parts. The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-in nuts are simply embedded into a blind or through hole.

The Creality SpacePi X4 Filament Dryer is designed to maintain the quality of your 3D printing filaments by keeping them dry and free from moisture. With an advanced drying system, this dryer ensures optimal performance for various types of filament, including PLA, ABS, and PETG, making it an essential tool for every 3D printer owner. Highlights Keeps filaments dry to avoid printing issues Compatible with multiple filament types, including PLA, ABS, and PETG Features a large drying capacity, handling up to 4 spools Adjustable temperature and drying time for flexibility Lightweight design for easy storage and transport Suitable for both home and professional use

The deburrer removes the protruding edges on the 3D printing component with little effort. This makes the metal deburrer perfect as a 3D printing tool and should not be missing from any 3D printing accessory kit.

The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-fit nuts are simply embedded into a blind or through hole.

Dry your filament before use to get the best printing result. Avoid errors caused by air bubbles and reduce errors caused by warping and stringing. HighlightsAdjustable temperature 45-65°CReal-time humidity monitoringDrying time setting 0-24h360° hot-air heating

The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-fit nuts are simply embedded into a blind or through hole.

Ruthex soldering tips for ruthex threaded inserts. The ruthex soldering tips can be used even more easily in 3D printing parts from 3D printers such as Anycubic, Creality or Prusa.

Smaller, lighter, and better than ever before, our Revo Micro HotEnd uses the smallest heatsink we’ve produced so far. Weighing in at only 30g, use Revo Micro to squeeze more speed performance from your motion system. Adaptable to Bowden or direct drive setups, Revo Micro is fully compatible with our Revo ecosystem, so you can easily change nozzles without tools or hot tightening at room temperature, using just your fingers. With an anodised black heatsink, not only does Revo Micro run cool – it looks cool, too. Designed for use with Revo Nozzles Works with a Revo HeaterCore for faster heat-ups Smallest and lightest HotEnd we’ve produced so far Titanium-like performance Ultra-lightweight construction for improved speed performance Compatible with popular 3D printers including Creality, Ender, Prusa, Anet, Biqu, Monoprice and many more

Specially designed for threaded inserts To create a perfect drill hole for. To obtain threaded inserts, drills of the appropriate size are required. Conventional drill sets do not accommodate these specific sizes, which is why we have developed drills that produce holes suitable for threaded inserts.

The Creality K2 Plus Ceramic Heating Block Kit delivers fast, stable, and efficient heat transfer for high-performance 3D printing. Designed specifically for the Unicorn K2 Plus hotend, the kit combines advanced ceramic insulation with a robust heating element to ensure consistent temperature control, even at higher print speeds.Key FeaturesOptimized for Creality Unicorn K2 Plus hotendRapid and uniform heat distributionCeramic insulation reduces heat lossSupports high-speed and high-temp printingDurable and stable under long-term useEasy replacement and secure installation

The K2 Plus Epoxy Resin Build Plate provides a smooth and stable surface for 3D printing, ensuring strong adhesion and consistent print quality. Its durable epoxy resin construction enhances reliability, making it a great choice for various printer models. Key Features Excellent adhesion for reliable prints High flatness for consistent results Durable epoxy resin material Compatible with multiple printer models

The ruthex Deburrer is a precision hand tool for cleaning and refining 3D-printed parts — perfect for removing small burrs and imperfections after printing. Highlights: Designed for perfect post-processing of 3D prints Includes 11 high-quality HSS blades with 360° rotation Robust metal handle with integrated blade storage Quick-release system for safe and easy blade changes Comfortable ergonomic grip for precise work Long-lasting blades for various applications Also suitable for resin, wood, and soft metals

The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-fit nuts are simply embedded into a blind or through hole.

The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-fit nuts are simply embedded into a blind or through hole.

The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-fit nuts are simply embedded into a blind or through hole.

The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-fit nuts are simply embedded into a blind or through hole.

The Polymaker Polysher is a desktop post-processing unit designed to seamlessly smooth 3D printed models made with PolySmooth and PolyCast filaments. Utilizing Polymakers Layer-Free technology, it employs a fine mist of isopropyl alcohol (IPA) or ethanol to gently dissolve surface layer lines, resulting in a glossy, professional-quality finish. This compact and user-friendly device is ideal for creators seeking to enhance the aesthetic quality of their 3D prints without manual sanding or painting.Key FeaturesCompatible exclusively with PolySmooth and PolyCast filamentsEmploys Layer-Free technology for smooth, glossy surfacesSimple operation with adjustable misting time (10-40 minutes)Maximum part dimensions 150 mm diameter x 180 mm heightSafe design with airtight sealing and automatic shut-offRequires isopropyl alcohol or ethanol (70% or higher)

Revo CR is a drop-in upgrade for some of the most popular Creality 3D printers available, including the Creality CR-10 and Ender 3 series.

Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening – just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print. Compatible with Revo cold sides, including Revo Six, Revo Micro, and Revo Hemera No need to hot tighten – each Revo Nozzle is a factory-assembled nozzle and heatbreak in one Works with a Revo HeaterCore for faster heat-ups and greater efficiency than most HotEnds on the market Compatible with popular FDM 3D printers, such as Creality, Ender, Prusa, Anet, Biqu, Monoprice, and many more

The Nebula Smart Kit from Creality combines speed and high quality with maximum flexibility. The kit consists of the Nebula Pad and the Nebula Camera, which are equipped with versatile functions to achieve the best printing results when used together.HighlightsHigh-Speed PrintingPrecise ControlRemote monitoring & recordingEasy Installation

The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. VORON, Anycubic, Creality or Prusa using heat. Using heat from a soldering iron, the press-fit nuts are simply embedded into a blind or through hole.