Filament & Resin

PrimaSELECT™ Ultem 1010 Polyether Imide (PEI) is an amorphous, amber to transparent thermoplastics with a glass transition temperature (Tg) of 217 °C and performs in continuous use up to 170 °C. This inherently flame-retardant plastic has UL94 V0 and 5VA ratings.Material properties Ultem 1010:Polyether Imide (PEI) – Amorphous, amber to transparent thermoplasticsGlass transition temperature (Tg) of 217 °C – Performs in continuous use up to 170 °CFlame-retardant plastic – UL94 V0 and 5VA ratingsPerfect for aerospace, automotive and electronics industry

PrimaSELECT Ultem 9085 Polyether Imide (PEI) is an amorphous, high-performance thermoplastics with a glass transition temperature (Tg) of 186 C. This material features superior mechanical performance, flame retardancy (UL 94-VO rated) and strength-to-weight ratio. Start additive manufacturing of end use parts now.Material properties PrimaSELECT Ultem 9085:High-performance thermoplastics Polyether Imide (PEI)Superior mechanical performance Excellent strength-to-weight ratioFlame retardancy (UL 94-VO rated)Glass transition temperature (Tg) of 186 C

PrimaSELECT™ PPSU Polyphenylsulfone (PPSU) is a high-performance amorphous thermoplastic that offers better impact and chemical resistance than PEI. PPSU can be used at temperatures up to 180 Cᵒ. Furthermore, PPSU has superior hydrolysis resistance compared to other amorphous thermoplastics, measured in steam autoclaving cycles, it can be steam sterilized virtually indefinitely. It is also resistant to common acids and bases over a wide temperature range.Material properties Polyphenylsulfone (PPSU):Better impact strength and chemical resistance than PEISuperior hydrolysis resistance – Virtually unlimited steam sterilizabilityResistant to acids and bases over a wide temperature rangeApplications in aerospace, automotive, dentistry & other medical applications

This ready-mixed, urethane-polymer filler uses the advanced technology of UV (Ultra-Violet) light to cure in an instant! This highly versatile material will adhere to most surfaces, including plastics, glass & metal. Apply a thin layer of IncredaFILL™ to any surface, then use the portable UV torch and watch it set rock hard! This 100% solid material was specially formulated using the latest microparticle technology. Once cured, UV & water-resistant, non-shrinking & non-cracking filler can be sanded then finished with any paint or varnish.FeaturesUV & water-resistant, non-shrinking & non-crackingCure it with UV lightRepair your print with this filler

The PrimaCreator Value Dental Casting Resin is a high quality, affordable resin suitable for casting in the dental sector. It is formulated in such a way that makes it easy to use, with easy burn out for different dental metals without picking any casting powders.FeaturesOptimized for UV light source 395 – 405 nmFast curing time, 3-4s Per Layer (depending on colour) for quicker prints (Monochrome LCD)After finished 3D printing clean your print in IPA (Isopropyl Alcohol) or PrimaCreator Resin Cleaner to rinse off extra resin leftPrimaValue Resins work on several 3D printersWhen it´s time for curing you can use sunlight or a UV curing chamber

The PrimaCreator Value Dental Professional Resin is a high quality, affordable dental modelling resin. It is formulated in such a way that makes it easy to use, with super low shrinkage, low odours and is non-toxic so it is safe to handle and work with.FeaturesOptimized for UV light source 395 405 nmFast curing time, 3-4s Per Layer (depending on colour) for quicker prints. (Monochrome LCD)After finished 3D printing clean your print in IPA (Isopropyl Alcohol) or PrimaCreator Resin Cleaner to rinse off extra resin leftPrimaValue Resins work on several 3D printersWhen its time for curing you can use sunlight or a UV curing chamber.

The PrimaCreator Value Jewellery Casting Pro Resin is a high quality, affordable casting resin that is super easy to use thanks to its high wax content. That means there is no need for expensive gypsum materials and casting equiptment shrinkage and its ability to reproduce super fine details. HighlightsOptimized for UV light source 395 – 405 nmFast curing time, 6-8s Per Layer (depending on colour) for quicker prints. (Monochrome LCD)After finished 3D printing clean your print in IPA (Isopropyl Alcohol) or PrimaCreator Resin Cleaner to rinse off extra resin leftPrimaValue Resins work on several 3D printersWhen it´s time for curing you can use sunlight or a UV curing chamber.

The PrimaCreator Value Jewellery Casting Resin is a high quality, affordable casting resin for Jewellery. It is formulated in such a way that makes it easy to use, with no-ash burn out, low shrinkage and its ability to reproduce super fine details.Features:Optimized for UV light source 395 405 nmFast curing time, 6-8s Per Layer (depending on colour) for quicker prints. (Monochrome LCD)After finished 3D printing clean your print in IPA (Isopropyl Alcohol) or PrimaCreator Resin Cleaner to rinse off extra resin leftPrimaValue Resins work on several 3D printersWhen its time for curing you can use sunlight or a UV curing chamber.