Upgrades

Upgrade your Prusa MK3 3D printer with Revo to unlock rapid, tool free nozzle changing. This Coldside kit includes a Revo ready drop-in replacement heatsink plus everything you need to securely mount the new setup to your printer. Pair your Revo heatsink with one of our carefully curated Hotside packs to ensure your printing needs are met, straight out of the box.HighlightsDrop-in replacement for Prusa MK3Continue to use your Prusa Slicer print profiles no changes are requiredTool-free nozzle changes in under 60 seconds

Its time to upgrade your existing V6 setup to unlock rapid, tool free nozzle changing with our latest technology, Revo. This Coldside kit includes a ready drop-in replacement Revo heatsink plus everything you need to securely mount the new setup to your printer. Pair your Revo Six sink with one of our carefully curated Hotside packs to ensure your printing needs are met, straight out of the box.HighlightsDrop in replacement for your existing V6 setupTool-free nozzle changes in under 60 seconds

Upgrade your Prusa Mini 3D printer with Revo to unlock rapid, tool free nozzle changing. This Coldside kit includes a Revo ready drop-in replacement heatsink plus everything you need to securely mount the new setup to your printer, including a 3D printed bracket.Pair your Revo heatsink with one of our carefully curated Hotside packs to ensure your printing needs are met, straight out of the box.HighlightsDrop in replacement for Prusa Mini/+Fully compatible with stock Prusa Mini firmware, no need to PID tune after you upgrade!Reuse your stock Prusa fanTool-free nozzle changes in under 60 seconds

Upgrade your Creality printer (please check compatibility list) with Revo to unlock rapid, tool free nozzle changing. This Coldside kit includes a Revo ready drop-in replacement heatsink plus everything you need to mount the new setup to your Creality printer. Pair with our Creality specific Starter Pack to begin experimenting with the 2 most popular brass nozzles within minutes.HighlightsTool-free nozzle changes in under 60 secondsCompatible with Creality Ender 3, Ender 3s, Ender 3 Pro, Ender v2, Ender 5, Ender 5 Pro, Ender 5 Plus, Ender 6, Ender 2 Pro, CR10, CR10S, CR10 S4, CR10 S5 & CR20 Mini

Upgrade your Voron 3D printer with Revo to unlock rapid, tool-free nozzle changing. Developed in collaboration with the Voron Design Team, this Coldside kit includes a Revo ready drop-in replacement heatsink plus everything you need to rigidly mount the new setup to your Voron printer. Pair your Voron Revo sink with one of our carefully curated Hotside packs to ensure your printing needs are met, straight out of the box.HighlightsCompatible with Voron 1, Voron Trident, Voron Switchwire, Voron 2.4, Voron Legacy, & Voron 0.1Tool-free nozzle changes in under 60 secondsSuper lightweight construction for improved speed performancePairs perfectly with the Voron StealthBurner

Upgrade your Creality Ender 3 S1 with Revo to unlock rapid, tool free nozzle changing. This Coldside kit includes a Revo ready drop-in replacement heatsink plus everything you need to mount the new setup to your Ender 3 S1 printer. Pair with our Creality specific Starter Pack to start experimenting with the 2 most popular brass nozzles within minutes.HighlightsCompatible with Creality 3 S1Includes CR touch spacer and optimized part cooling fan shroudTool-free nozzle changes in under 60 seconds

All-metal kit, with overall high temperature resistance up to 500 ℃.

Revised Features New heat break with reinforced throat and revised radiator to prevent damage during installation and repairs New heat sink with wider opening for the filament path to more readily accept multi-material setups like the Prusa MMU or Mosaic Palette. Main Benefits The Mosquito Magnum prints up to 20% faster than any other hotend on the market A thermal insulator protects the extended melt zone from the effects of active cooling, and radiative heat loss. It has a heat transmission rate as low as 3 W/m*K, meaning you can have ultimate confidence in the speed of your print, while at the same time maintaining the high resolution benefits achieved with the standard Mosquito The melt zone is extended proximally upwards to maintain a small form factor A multi extrusion setup with both high flow and high resolution optimized designs can be created without needing to purchase new nozzles or make carriage modifications to accommodate hotends of different sizes Oh yeah, and you can change the nozzle with one hand. Mosquito Magnum is only available for 1.75 mm filament at this time.

Phaetus Pump Set (without cooling liquid and Hotend)

Smaller, lighter, and better than ever before, our Revo Micro HotEnd uses the smallest heatsink we’ve produced so far. Weighing in at only 30g, use Revo Micro to squeeze more speed performance from your motion system. Adaptable to Bowden or direct drive setups, Revo Micro is fully compatible with our Revo ecosystem, so you can easily change nozzles without tools or hot tightening at room temperature, using just your fingers. With an anodised black heatsink, not only does Revo Micro run cool – it looks cool, too. Designed for use with Revo Nozzles Works with a Revo HeaterCore for faster heat-ups Smallest and lightest HotEnd we’ve produced so far Titanium-like performance Ultra-lightweight construction for improved speed performance Compatible with popular 3D printers including Creality, Ender, Prusa, Anet, Biqu, Monoprice and many more

Smaller, lighter, and better than ever before, our Revo Micro HotEnd uses the smallest heatsink we’ve produced so far. Weighing in at only 30g, use Revo Micro to squeeze more speed performance from your motion system. Adaptable to Bowden or direct drive setups, Revo Micro is fully compatible with our Revo ecosystem, so you can easily change nozzles without tools or hot tightening at room temperature, using just your fingers. With an anodised black heatsink, not only does Revo Micro run cool – it looks cool, too. Designed for use with Revo Nozzles Works with a Revo HeaterCore for faster heat-ups Smallest and lightest HotEnd we’ve produced so far Titanium-like performance Ultra-lightweight construction for improved speed performance Compatible with popular 3D printers including Creality, Ender, Prusa, Anet, Biqu, Monoprice and many more

Smaller, lighter, and better than ever before, our Revo Micro HotEnd uses the smallest heatsink weve produced so far. Weighing in at only 30g, use Revo Micro to squeeze more speed performance from your motion system. Adaptable to Bowden or direct drive setups, Revo Micro is fully compatible with our Revo ecosystem, so you can easily change nozzles without tools or hot tightening at room temperature, using just your fingers. With an anodised black heatsink, not only does Revo Micro run cool it looks cool, too. Designed for use with Revo Nozzles Works with a Revo HeaterCore for faster heat-ups Smallest and lightest HotEnd weve produced so far Titanium-like performance Ultra-lightweight construction for improved speed performance Compatible with popular 3D printers including Creality, Ender, Prusa, Anet, Biqu, Monoprice and many more

Revo Six is a drop-in replacement for your E3D V6 HotEnd, giving you all the benefits of E3D’s RapidChange Revo ecosystem in an easy-to-upgrade package. Compatible with Prusa MK2/3 (Check voltage before ordering) Same height, diameter, and mounting as the E3D V6 all-metal HotEnd No machine redesign needed - drops right into your existing setup Compatible with Revo Nozzles – swap nozzles at room temperature without tools or hot tightening Anodised black sink and crystal-clear fan mount with fan included Revo HeaterCore included for faster, safer heating

Revo Six is a drop-in replacement for your E3D V6 HotEnd, giving you all the benefits of E3D’s RapidChange Revo ecosystem in an easy-to-upgrade package. Compatible with Prusa MK2/3 (Check voltage before ordering) Same height, diameter, and mounting as the E3D V6 all-metal HotEnd No machine redesign needed - drops right into your existing setup Compatible with Revo Nozzles – swap nozzles at room temperature without tools or hot tightening Anodised black sink and crystal-clear fan mount with fan included Revo HeaterCore included for faster, safer heating

Revo Six is a drop-in replacement for your E3D V6 HotEnd, giving you all the benefits of E3Ds RapidChange Revo ecosystem in an easy-to-upgrade package. Compatible with Prusa MK2/3 (Check voltage before ordering) Same height, diameter, and mounting as the E3D V6 all-metal HotEnd No machine redesign needed - drops right into your existing setup Compatible with Revo Nozzles swap nozzles at room temperature without tools or hot tightening Anodised black sink and crystal-clear fan mount with fan included Revo HeaterCore included for faster, safer heating

Smaller, lighter, REDDER. Say hello to the Revo Voron – the HotEnd of choice for Voron 3D printers. We’ve developed this Revo-compatible cold side in collaboration with Team Voron. Boost your Voron 3D printer with RapidChange capabilities so you can change nozzles without tools or hot tightening!

Smaller, lighter, REDDER. Say hello to the Revo Voron – the HotEnd of choice for Voron 3D printers. We’ve developed this Revo-compatible cold side in collaboration with Team Voron. Boost your Voron 3D printer with RapidChange capabilities so you can change nozzles without tools or hot tightening!

Revo CR is a drop-in upgrade for some of the most popular Creality 3D printers available, including the Creality CR-10 and Ender 3 series.

Revo CR is a drop-in upgrade for some of the most popular Creality 3D printers available, including the Creality CR-10 and Ender 3 series.