Accessories

The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-fit nuts are simply embedded into a blind or through hole.

The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-fit nuts are simply embedded into a blind or through hole.

The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-fit nuts are simply embedded into a blind or through hole.

M2 + M3 + M4 + M5 Thread Inserts for your 3D printing parts. The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-in nuts are simply embedded into a blind or through hole.

The deburrer removes the protruding edges on the 3D printing component with little effort. This makes the metal deburrer perfect as a 3D printing tool and should not be missing from any 3D printing accessory kit.

The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-fit nuts are simply embedded into a blind or through hole.

Smaller, lighter, and better than ever before, our Revo Micro HotEnd uses the smallest heatsink we’ve produced so far. Weighing in at only 30g, use Revo Micro to squeeze more speed performance from your motion system. Adaptable to Bowden or direct drive setups, Revo Micro is fully compatible with our Revo ecosystem, so you can easily change nozzles without tools or hot tightening at room temperature, using just your fingers. With an anodised black heatsink, not only does Revo Micro run cool – it looks cool, too. Designed for use with Revo Nozzles Works with a Revo HeaterCore for faster heat-ups Smallest and lightest HotEnd we’ve produced so far Titanium-like performance Ultra-lightweight construction for improved speed performance Compatible with popular 3D printers including Creality, Ender, Prusa, Anet, Biqu, Monoprice and many more

The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-fit nuts are simply embedded into a blind or through hole.

AESUB transparent is a self-vanishing dulling spray developed by scanning experts. It was developed for photogrammetry, Lidar and other colour capturing scanning methods. The spray evaporates within a few hours, meaning that there is no need for cleaning after scanning. Highlights:Transparent vanishing dulling sprayEliminates reflections without loss of color informationPerfrect cor 3D scanning, photo-grammetry, film & photographyThin & homogenous coatingFree of pigmentsNo cleaning required

Comes with a Copper Plated Reprap M6 0,4 mm Nozzle.

Revo CR is a drop-in upgrade for some of the most popular Creality 3D printers available, including the Creality CR-10 and Ender 3 series.

Specially designed for threaded inserts To create a perfect drill hole for. To obtain threaded inserts, drills of the appropriate size are required. Conventional drill sets do not accommodate these specific sizes, which is why we have developed drills that produce holes suitable for threaded inserts.

The Phaetus Dragon ST HeatBreak Kit is a genuine replacement designed for the Dragon ST hotend. Made from a copper alloy with a nickel plating, it provides excellent thermal conductivity and wear resistance. The heatbreak ensures stable temperature separation between the hot and cold zones, reducing the risk of heat creep and improving print consistency. Perfect for maintaining reliable performance with engineering-grade materials. Key Features Original heatbreak kit for Dragon ST hotend Nickel-plated copper alloy for durability Excellent thermal conductivity Prevents heat creep and improves stability Optimized for engineering-grade filaments Easy to install as a replacement part

Ruthex soldering tips for ruthex threaded inserts. The ruthex soldering tips can be used even more easily in 3D printing parts from 3D printers such as Anycubic, Creality or Prusa.

The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-fit nuts are simply embedded into a blind or through hole.

The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-fit nuts are simply embedded into a blind or through hole.

The Phaetus Voron Dragon HF is a high-performance, all-metal hotend designed for demanding 3D printing applications. With ultra-fine heatbreak insulation, rapid heating, and superb flow rate, it excels in precision and high-temperature use up to 500 °C. Fully compatible with E3D V6 setups, it ensures reliable and versatile performance. Key Features Ultra-thin 0.1 mm titanium heatbreak for exceptional thermal isolation Rigid support structure secures heatbreak under external forces Nozzle change without touching the heat block Copper alloy components for fast and stable heating Supports abrasive and high-temp filaments up to 500 °C Drop-in replacement for E3D V6 interface

The Phaetus Dragonfly HIC HF Integrated Welded Nozzle 0.4 mm is an original hardened-steel nozzle designed specifically for the Dragonfly HIC HF hotend. With its robust one-piece welded M6 construction, it provides optimal heat transfer, sealing and durability—ideal for high-performance, high-flow printing. Key Features Hardened steel, welded one-piece M6 nozzle Precisely 0.4 mm diameter for fine detail Exclusive to Dragonfly HIC HF hotend Superior heat transfer and leak resistance Exceptional wear resistance and longevity Designed for high-speed, high-performance printing

Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening – just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print. Compatible with Revo cold sides, including Revo Six, Revo Micro, and Revo Hemera No need to hot tighten – each Revo Nozzle is a factory-assembled nozzle and heatbreak in one Works with a Revo HeaterCore for faster heat-ups and greater efficiency than most HotEnds on the market Compatible with popular FDM 3D printers, such as Creality, Ender, Prusa, Anet, Biqu, Monoprice, and many more

The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-fit nuts are simply embedded into a blind or through hole.

The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-fit nuts are simply embedded into a blind or through hole.

The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-fit nuts are simply embedded into a blind or through hole.

Copper alloy / hardened steel material, meet high temperature, wear-resistant material printing. Comes with a Copper Plated Reprap M6 0,4 mm Nozzle.

The Phaetus VORON Dragon ST is a high-quality, all-metal hotend optimized for precision 3D printing. Featuring a 0.1 mm titanium heatbreak, efficient copper alloy construction, and compatibility with V6-style mounts, it delivers fast heating, excellent thermal isolation, and broad filament support—rated up to 500 °C. Key Features Ultra-thin 0.1 mm titanium heatbreak with excellent thermal isolation Copper alloy core for rapid heating and efficient heat dissipation Reinforced rigid frame for stable performance and easy nozzle changes Polished internals (Ra 0.3) for smooth filament flow and fine detail Full-metal design with high-temp capability up to 500 °C Drop-in compatible with E3D V6, Prusa, Titan and BMG setups

The Phaetus Dragonfly HIC HF Integrated Welded Nozzle 0.6 mm is a high-performance hardened-steel nozzle tailored for high-speed 3D printing. Featuring a welded, one-piece M6 design, it delivers optimal thermal conductivity, wear-resistance, and extrusion precision for professional and industrial applications. Key Features Original 0.6 mm nozzle for Phaetus Dragonfly HIC HF hotends Made from hardened steel for superior durability Welded one-piece construction with M6 thread High thermal conductivity for consistent performance Designed for high-speed, precise extrusion Ideal for demanding and professional printing environments

The Phaetus Dragonfly HIC HF Integrated Welded Nozzle (0.8 mm) is a high-flow, welded hardened-steel nozzle designed for the Dragonfly HIC HF hotend. It delivers exceptional wear resistance, leak-free operation, and superior thermal performance for demanding printing environments. Key Features Welded, one-piece hardened steel construction for high strength and durability Optimized for high-volume extrusion in fast, industrial-grade printing Precise 0.8 mm diameter—ideal for large layer heights and rapid deposition Excellent thermal conductivity and sealing to prevent leaks Exclusively compatible with Phaetus Dragonfly HIC HF hotend

FeaturesAll V6 hotend interfacesPrusa I3 MK3/MK3STitan ExtrudersBMG Extruders

Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening – just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print. Compatible with Revo cold sides, including Revo Six, Revo Micro, and Revo Hemera No need to hot tighten – each Revo Nozzle is a factory-assembled nozzle and heatbreak in one Works with a Revo HeaterCore for faster heat-ups and greater efficiency than most HotEnds on the market Compatible with popular FDM 3D printers, such as Creality, Ender, Prusa, Anet, Biqu, Monoprice, and many more

Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening – just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print. Compatible with Revo cold sides, including Revo Six, Revo Micro, and Revo Hemera No need to hot tighten – each Revo Nozzle is a factory-assembled nozzle and heatbreak in one Works with a Revo HeaterCore for faster heat-ups and greater efficiency than most HotEnds on the market Compatible with popular FDM 3D printers, such as Creality, Ender, Prusa, Anet, Biqu, Monoprice, and many more

Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening – just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print. Compatible with Revo cold sides, including Revo Six, Revo Micro, and Revo Hemera No need to hot tighten – each Revo Nozzle is a factory-assembled nozzle and heatbreak in one Works with a Revo HeaterCore for faster heat-ups and greater efficiency than most HotEnds on the market Compatible with popular FDM 3D printers, such as Creality, Ender, Prusa, Anet, Biqu, Monoprice, and many more