Accessories

Crealitys Space Pi Filament Dry Box helps keep your filament dry while youre printing. It gently heats the material to avoid problems like stringing, clogs, or bad layer adhesion. With an easy-to-use touchscreen and support for a wide range of filaments, its a handy addition to any 3D printing setup. HighlightsDries filament during the printing process360-degree air circulation with PTC heatingAdjustable temperature from 45 to 70 °CUp to 48-hour timer with one-touch presetsEasy-to-read 3.7-inch touchscreen displayRemembers settings after a power outage

Wet 3D printing filament can result in stringing, clogging, poor adhesion, and layer shifting. The Creality Spcae Pi Filament Dryer Plus solves these issues by drying the filament during the printing process itself, enhancing your 3D model quality and minimizing the influence of external environmental factors on the printing of 3D filaments. HighlightsTwo rolls capacity, double dryingAdjustable temperature 45-70Real-time humidity&temperature monitoringDrying time setting 0-48h360° hot-air heatingOne-key set for 12 filaments

The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-fit nuts are simply embedded into a blind or through hole.

The perfect solution for taking your laser engraving projects to the next level. This innovative enclosure provides a safe and controlled environment for your laser engraving machine, allowing you to work with peace of mind and precision. Experience improved results and enhanced efficiency with this must-have accessory for your laser engraving setup.HighlightsDustproof and SmokeproofEfficient Smoke ExhaustEasy to OperateProtect HealthSize 720 x 720 x 400mm

The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-fit nuts are simply embedded into a blind or through hole.

M2 + M3 + M4 + M5 Thread Inserts for your 3D printing parts. The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-in nuts are simply embedded into a blind or through hole.

The Creality SpacePi X4 Filament Dryer is designed to maintain the quality of your 3D printing filaments by keeping them dry and free from moisture. With an advanced drying system, this dryer ensures optimal performance for various types of filament, including PLA, ABS, and PETG, making it an essential tool for every 3D printer owner. Highlights Keeps filaments dry to avoid printing issues Compatible with multiple filament types, including PLA, ABS, and PETG Features a large drying capacity, handling up to 4 spools Adjustable temperature and drying time for flexibility Lightweight design for easy storage and transport Suitable for both home and professional use

The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-fit nuts are simply embedded into a blind or through hole.

The deburrer removes the protruding edges on the 3D printing component with little effort. This makes the metal deburrer perfect as a 3D printing tool and should not be missing from any 3D printing accessory kit.

Ruthex soldering tips for ruthex threaded inserts. The ruthex soldering tips can be used even more easily in 3D printing parts from 3D printers such as Anycubic, Creality or Prusa.

Dry your filament before use to get the best printing result. Avoid errors caused by air bubbles and reduce errors caused by warping and stringing. HighlightsAdjustable temperature 45-65°CReal-time humidity monitoringDrying time setting 0-24h360° hot-air heating

The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-fit nuts are simply embedded into a blind or through hole.

AESUB transparent is a self-vanishing dulling spray developed by scanning experts. It was developed for photogrammetry, Lidar and other colour capturing scanning methods. The spray evaporates within a few hours, meaning that there is no need for cleaning after scanning. Highlights:Transparent vanishing dulling sprayEliminates reflections without loss of color informationPerfrect cor 3D scanning, photo-grammetry, film & photographyThin & homogenous coatingFree of pigmentsNo cleaning required

The K2 Plus Epoxy Resin Build Plate provides a smooth and stable surface for 3D printing, ensuring strong adhesion and consistent print quality. Its durable epoxy resin construction enhances reliability, making it a great choice for various printer models. Key Features Excellent adhesion for reliable prints High flatness for consistent results Durable epoxy resin material Compatible with multiple printer models

The Creality K2 Plus Ceramic Heating Block Kit delivers fast, stable, and efficient heat transfer for high-performance 3D printing. Designed specifically for the Unicorn K2 Plus hotend, the kit combines advanced ceramic insulation with a robust heating element to ensure consistent temperature control, even at higher print speeds.Key FeaturesOptimized for Creality Unicorn K2 Plus hotendRapid and uniform heat distributionCeramic insulation reduces heat lossSupports high-speed and high-temp printingDurable and stable under long-term useEasy replacement and secure installation

The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-fit nuts are simply embedded into a blind or through hole.

The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-fit nuts are simply embedded into a blind or through hole.

The Copymaster3D Magnetic Build Surface is a reliable, budget-friendly interchangeable print surface cut precisely to 235 × 235 mm. With a soft magnetic backing and porous top layer, it offers fast warm-up, excellent first-layer adhesion, and easy print removal—no glue or tape needed. Key Features: • Precision cut 235 × 235 mm size fits many FDM printers • Flexible magnetic backing enables effortless print removal • Quick heating—warms faster than traditional glass • Deep porous texture promotes strong filament adhesion • Includes two-part system: top sheet + magnetic base • Compatible with printers like Ender 3, Ender 5 series, and more

Upgrade your 3D printing setup with the Copymaster3D Magnetic Build Surface cut to 310 × 310 mm. This high-quality, magnetic two-piece system provides fast heating and excellent adhesion with deep-porous texture, while keeping prints securely in place and easy to remove. Ideal as a replacement or upgrade for popular printers like CR 10, Anet, and Sidewinder X-series. Highlights Precisely cut 310 × 310 mm to fit most FDM printers Soft magnetic backing makes print removal effortless Faster heat-up compared to glass beds Deep pores enhance initial layer adhesion Includes top print surface and magnetic base layer Easy peel-off and reattach system—no tape or sprays needed

Specially designed for threaded inserts To create a perfect drill hole for. To obtain threaded inserts, drills of the appropriate size are required. Conventional drill sets do not accommodate these specific sizes, which is why we have developed drills that produce holes suitable for threaded inserts.

The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-fit nuts are simply embedded into a blind or through hole.

The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-fit nuts are simply embedded into a blind or through hole.

The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-fit nuts are simply embedded into a blind or through hole.

The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-fit nuts are simply embedded into a blind or through hole.

The Nebula Smart Kit from Creality combines speed and high quality with maximum flexibility. The kit consists of the Nebula Pad and the Nebula Camera, which are equipped with versatile functions to achieve the best printing results when used together.HighlightsHigh-Speed PrintingPrecise ControlRemote monitoring & recordingEasy Installation

The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. VORON, Anycubic, Creality or Prusa using heat. Using heat from a soldering iron, the press-fit nuts are simply embedded into a blind or through hole.

The Snapmaker Basswood Sheet A250 (5-pack) offers a lightweight, laser-compatible wood material ideal for engraving, cutting, and modeling applications. Each sheet measures 200 x 200 mm with a fine 1.5 mm thickness, providing excellent flexibility and surface uniformity. Made from natural basswood, these sheets deliver a smooth, light-toned finish that ensures clear engraving results and clean cut edges. Key Features Precision-cut basswood sheets for laser use 200 x 200 mm size fits the Snapmaker A250 and similar platforms 1.5 mm thickness supports fine cutting and bending Light, even grain for clean engraving and minimal charring Ideal for models, ornaments, crafts, and artistic projects Supplied in a flat-packed 5-piece set