Spare Parts & Accessories

PolyBox™ is a dry storage box designed to provide the optimum environment for 3D printing filaments. The PolyBox™ is compatible with all 3D printers and can house two 1kg spools or one 3kg spool.Highlights:High CompatibilityProvides Optimum EnvironmentUser Friendly Design

Buy this Creality Upgrade Silicon Carbon Build Surface Tempered Glass Plate with Special Chemical Coating 235 x 235 x 4 mm for MK2, MK3 Hot bedMain Features:Silicon Carbon Build Surface Tempered Glass PlateSpecial Chemical Coating 235 x 235 x 4 mmFor MK2, MK3 Hot bed

AESUB blue is a self-vanishing scanning spray developed by scanning experts. The spray evaporates within a few hours, meaning that there is no need for cleaning after scanning.Highlights:Disappearing state-of-the-art scanningsprayNo cleaning requiredThin and homogeneous coatingFree of pigmentsDeveloped and approved by scanning experts

AESUB orange is a long-lasting self-volatilizing scanning spray developed by scanning experts. It eliminates basic application problems of 3D metrology, especially in sensitive areas (laboratories, production, etc.) and protects the equipment from contamination by deposition of pigments.Highlights:Disappearing state-of-the-art scanningsprayLong-lastingNo cleaning requiredThin and homogeneous coatingFree of pigmentsDeveloped and approved by scanning experts

AESUB white is a permanent scanning spray developed by scanning experts. It is the result of consistent further development of permanent scanning sprays. Please Note, This product can only be shipped within Sweden! Highlights:Permanent state-of-the-art scanningsprayFree of titanium dioxide nano particles (TiO2)Thin and homogenous coatingDeveloped and approved by scanning experts

Copper and Hardened Vanadium Steel nozzle for high flow applications with abrasive materials. Increase the Max Volumetric Flow of your Volcano style heat block by 50%. Nozzle is supplied with Nickel Coating (grey color).Will fit the following blocks/printers:E3D Volcano blocksOther Volcano type blocksArtillery Sidewinder X1 and X2Anycubic VyperFLSUN Super RacerArtillery Genius ProAnycubic Kobra and Kobra MaxLulzbot TAZ MOARstruderOthers compatible with Volcano

Copper and Hardened Vanadium Steel nozzle for high flow applications with abrasive materials. Increase the Max Volumetric Flow of your RepRap M6 style heat block by 50%. Nozzle is supplied with Nickel Coating (grey color).Will fit the following blocks/printers:Mosquito® / MagnumMosquito® LiquidMosquito® Magnum+Copperhead™E3D Chimera and KrakenE3D V4, V5 and V6 blocksPrusa i3, Prusa MiniRepRap M6

Copper and Hardened Vanadium Steel nozzle for high flow applications with abrasive materials. Increase the Max Volumetric Flow of your RepRap M6 style heat block by 50%. Nozzle is supplied with Nickel Coating (grey color).Bondtech CHT BiMetal MK8 Coated Nozzle Advantages:Abrasive-proof to work with Carbon and Glass fiber composite materialsHigher melt capacity by increasing the surface area of the heating wallsFlow Rate gains between 25 and 65%Competitive price/performance priceMachined with ultra-precisionCopper body and Hardened Vanadium Steel inserts nozzle with Nickel coated surface

Revo ObXidian is E3D's latest abrasive resistant Revo Nozzle offering, specifically designed for printing fibre-filled polymers. Unlike other abrasion resistant Nozzles, ObXidian’s copper alloy construction has a similar thermal performance to Brass, making it a true drop-in replacement. Just use the same slicer profiles as for your Brass Nozzles.Key features:Material: Copper/Hardened Steel Assembly with E3DLC™ coating.Input diameter: 1.75mmMaximum temperature: 300°C

ObXidian is E3D's latest abrasive Nozzle offering, specifically designed for printing fibre-filled polymers. Unlike other abrasion resistant Nozzles, ObXidian’s copper alloy construction has a similar thermal performance to Brass, making it a true drop-in replacement. Just use the same slicer profiles as for your Brass Nozzles. Key Features: Material: Copper/Hardened Steel Assembly with E3DLC™ coating. Input diameter: 1.75mm Maximum temperature: 300°C

Designed specifically with belt printing in mind these belt nozzles have a longer reach to enable printing at 45 with Revo HotEnds. Start swapping nozzles in under than 60 seconds without tools or hot tightening. Just use your fingers!

Zodiac by E3D Nozzles are a premium range for those that want superior performance. The Nozzle is designed for printing abrasive materials. Designed for use with Crealitys MK8 Hotends.

Zodiac by E3D Nozzles are a premium range for those that want superior performance. The nozzle is designed for printing abrasive materials and PRO Nozzles can be used at up to 450°C. Designed for use with Crealitys MK8 Hotends.

Zodiac by E3D Nozzles are a premium range for those that want superior performance. The nozzle is designed for printing abrasive materials and is manufactured from hardened tool steel with a special bi-layer coating.

Zodiac by E3D Nozzles are a premium range for those that want superior performance. The nozzle is designed for printing abrasive materials and is manufactured from hardened tool steel with a special bi-layer coating. PRO Nozzles can be used at up to 450°

Zodiac by E3D Nozzles are a premium range for those that want superior performance. The nozzle is designed for printing abrasive materials and are manufactured from hardened tool steel with a special bi-layer coating.

Zodiac by E3D Nozzles are a premium range for those that want superior performance. The nozzle is designed for printing abrasive materials and are manufactured from hardened tool steel with a special bi-layer coating. PRO Nozzles can be used at up to 450°C.

A premium nozzle choice, both CRB and Pro Zodiac nozzles are manufactured from hardened tool steel with a special bi-layer coating. Designed for use with Raise3D Pro3 series, Pro2 series and E2 printers only.

Nozzle for PioCreat G5 Pro & G12. Please Note: 0.4mm & 0.6mm is not compatible with G12.

HTX nozzles are high-temperature, abrasion-resistant nozzles. Much like ObXidian, HTX nozzles have a hardened steel tip, copper carrier and copper spreader segment to optimise the transmission of heat to the heatsink. The nozzle is then coated with Chromium Nitride to provide abrasive resistance up to 500°C.

These high-quality 3D printing nozzles are designed specifically for use with Prusas latest extruder – Nextruder. Compatible with Prusas MK4 and XL 3D printers, they feature an all-metal filament guide which means that Nextruders filament path is entirely metal. This helps improve overall printer reliability and enables speedier nozzle changing.Key featuresInput diameter 1.75mmMax temperature 300°CCompatibility Prusa MK4 & XL

These are nozzles for high flow applications Increase the Max Volumetric Flow of your Spider hotend by 25-65%. They are manufactured by Bondtech in-house, and will fit the following hotends: Creality Spider Hotend Creality Spider Speedy Ceramic Hotend

Revo HT nozzles are made from a copper nozzle and copper spreader to optimise the transmission of heat. The nozzle is then coated with Chromium Nitride for additional corrosion prevention and non-stick properties for printing up to 500°C.

These high-quality 3D printing nozzles are designed specifically for use with Prusas latest extruder – Nextruder. Compatible with Prusas MK4 and XL 3D printers, they feature an all-metal filament guide which means that Nextruders filament path is entirely metal. This helps improve overall printer reliability and enables speedier nozzle changing.HighlightsInput diameter 1.75mmMax temperature 300°CCompatibility Prusa MK4 & XL

With a wear resistance that is orders of magnitude higher than any other E3D nozzle, ObXidian is really hard. Several orders of magnitude harder than Nozzle X and indeed any other generic hardened steel nozzle. This is achieved by pairing a tool steel insert with the new E3DLC coating. This specially formulated coating also embeds non-stick properties into the Nozzle itself resulting in considerably less plastic build up around the Nozzle.HighlightsCopper/Hardened Steel Assembly with E3DLC coating.Input diameter 1.75mmMaximum temperature 300°CNozzles Sizes 0.4mm, 0.6mm, 0.8mm, 1mm, 1.2mm & 1.4mm