Spare Parts & Accessories

A regular brass nozzle is most often recommended as they have a superior conductivity when it comes to heat. But a brass nozzle has its draw backs. If you want to print with an abrasive material like carbon or glow in the dark filament a regular brass nozzle will wear out in a very short time. This is why you can choose to use a hardened steel nozzle, it will not wear out as quick as a brass nozzle but it´s made of steel and as a material it´s not optimized for being used as an “every day nozzle” due to the fact that the heat conductivity isn´t as good as in a brass nozzle. The most logical solution would be to have the best of both worlds.FeaturesAll filaments, one nozzleExtreme durabilityPerfect for very abrasive filaments like carbon, glow in the dark, glass fiber, metal, wood.Perfect diameter without jagged edges equals better print quality

The premium nozzles from PrimaCreator are a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print.FeaturesHigh-quality nozzleState of the art factoryTolerance is less than ± 0.01 mm

The premium nozzles from PrimaCreator are a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print.FeaturesHigh-quality nozzleState of the art factoryTolerance is less than ± 0.01 mm

The premium nozzles from PrimaCreator are a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print.FeaturesHigh-quality nozzleState of the art factoryTolerance is less than ± 0.01 mm

The premium nozzles from PrimaCreator are a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print.FeaturesHigh-quality nozzleState of the art factoryTolerance is less than ± 0.01 mm

Comes with a Copper Plated Reprap M6 0,4 mm Nozzle.

Comes with a Copper Plated RepRap M6 0,4 mm Nozzle.

Micro Swiss Direct Drive Extruder is a drop in system for CR10 / Ender PrintersFeaturesNo modification required, simple plug and playNo printed brackets or sandwiches

The premium nozzles from PrimaCreator are a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print.FeaturesHigh-quality nozzleState of the art factoryTolerance is less than ± 0.01 mm

The premium nozzles from PrimaCreator are a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print.FeaturesHigh-quality nozzleState of the art factoryTolerance is less than ± 0.01 mm

The premium nozzles from PrimaCreator are a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print.FeaturesHigh-quality nozzleState of the art factoryTolerance is less than ± 0.01 mm

The premium nozzles from PrimaCreator are a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print.FeaturesHigh-quality nozzleState of the art factoryTolerance is less than ± 0.01 mm

The premium nozzles from PrimaCreator are a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print.FeaturesHigh-quality nozzleState of the art factoryTolerance is less than ± 0.01 mm

The premium nozzles from PrimaCreator are a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print.FeaturesHigh-quality nozzleState of the art factoryTolerance is less than ± 0.01 mm

The premium nozzles from PrimaCreator are a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print.FeaturesHigh-quality nozzleState of the art factoryTolerance is less than ± 0.01 mm

Buy your new PHAETUS DRAGONFLY HOT-END BMO for better print quality and more posibilitys.FeaturesAll-metal kit, with overall high temperature resistance up to 500 ℃The hot-end is mainly composed of copper alloy materialConical fitting of heat break and heatsink

The All Metal Hot-End from PrimaCreator is the perfect addition for your Creality 3D Printer. It´s a very smart “drop in” conversion kit for your printer. You don't need to make any modifications to your printer and it's very easy to install in minutes! The cooling block don't have any thermal (PTFE) tube and this makes for a much faster cooling effect and a more stable control.FeaturesNo modification to your printerHeat break made from the best Titanium alloyBetter priceAll metal design for best resultsFits Creality CR-6 SE

The M2 nozzles are designed for high temperatures, abrasion resistance and with superior non-stick properties. Nozzles are machined from M2 high speed steel, hardened and tempered to 68 HRC, plated with Electroless Nickel Plating, and coated with WS2 coating.FeaturesUp to 450C without losing the hardness

The M2 nozzles are designed for high temperatures, abrasion resistance and with superior non-stick properties. Nozzles are machined from M2 high speed steel, hardened and tempered to 68 HRC, plated with Electroless Nickel Plating, and coated with WS2 coating.FeaturesUp to 450C without losing the hardness

The M2 nozzles are designed for high temperatures, abrasion resistance and with superior non-stick properties. Nozzles are machined from M2 high speed steel, hardened and tempered to 68 HRC, plated with Electroless Nickel Plating, and coated with WS2 coating.FeaturesUp to 450C without losing the hardness

Copper alloy / hardened steel material, meet high temperature, wear-resistant material printing. Comes with a Copper Plated Reprap M6 0,4 mm Nozzle.

The premium nozzles from Phaetus/PrimaCreator are a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print. This line of Nozzles is for ones who only wants the best! The Tungsten Carbide Nozzle is a true “All filaments, One Nozzle” From conventional printing with PLA to PEEK, all the way to Carbon Fiber reinforced materials, Tungsten Carbide Nozzle can easily handle it.HighlightsSuper Wear-Resistance High Temperature PerformanceLow Pushing ForceFaster Extrusion Speed Low Friction Thanks To Nano Coating

The premium nozzles from Phaetus/PrimaCreator are a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print. This line of Nozzles is for ones who only wants the best! The Tungsten Carbide Nozzle is a true “All filaments, One Nozzle” From conventional printing with PLA to PEEK, all the way to Carbon Fiber reinforced materials, Tungsten Carbide Nozzle can easily handle it.HighlightsSuper Wear-Resistance High Temperature PerformanceLow Pushing ForceFaster Extrusion Speed Low Friction Thanks To Nano Coating

The premium nozzles from Phaetus/PrimaCreator are a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print. This line of Nozzles is for ones who only wants the best! The Tungsten Carbide Nozzle is a true “All filaments, One Nozzle” From conventional printing with PLA to PEEK, all the way to Carbon Fiber reinforced materials, Tungsten Carbide Nozzle can easily handle it.HighlightsSuper Wear-Resistance High Temperature PerformanceLow Pushing ForceFaster Extrusion Speed Low Friction Thanks To Nano Coating

The premium nozzles from Phaetus/PrimaCreator are a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print. This line of Nozzles is for ones who only wants the best! The Tungsten Carbide Nozzle is a true “All filaments, One Nozzle” From conventional printing with PLA to PEEK, all the way to Carbon Fiber reinforced materials, Tungsten Carbide Nozzle can easily handle it.HighlightsSuper Wear-Resistance High Temperature PerformanceLow Pushing ForceFaster Extrusion Speed Low Friction Thanks To Nano Coating

Phaetus VORON Dragon Standard flow hot-end - (RepRap M6 Nozzle)

Phaetus VORON Dragon High flow hot-end - (RepRap M6 Nozzle)