Spare Parts & Accessories

Copper and Hardened Vanadium Steel nozzle for high flow applications with abrasive materials. Increase the Max Volumetric Flow of your Volcano style heat block by 50%. Nozzle is supplied with Nickel Coating (grey color).Will fit the following blocks/printers:E3D Volcano blocksOther Volcano type blocksArtillery Sidewinder X1 and X2Anycubic VyperFLSUN Super RacerArtillery Genius ProAnycubic Kobra and Kobra MaxLulzbot TAZ MOARstruderOthers compatible with Volcano

Copper and Hardened Vanadium Steel nozzle for high flow applications with abrasive materials. Increase the Max Volumetric Flow of your RepRap M6 style heat block by 50%. Nozzle is supplied with Nickel Coating (grey color).Will fit the following blocks/printers:Mosquito® / MagnumMosquito® LiquidMosquito® Magnum+Copperhead™E3D Chimera and KrakenE3D V4, V5 and V6 blocksPrusa i3, Prusa MiniRepRap M6

Copper and Hardened Vanadium Steel nozzle for high flow applications with abrasive materials. Increase the Max Volumetric Flow of your RepRap M6 style heat block by 50%. Nozzle is supplied with Nickel Coating (grey color).Bondtech CHT BiMetal MK8 Coated Nozzle Advantages:Abrasive-proof to work with Carbon and Glass fiber composite materialsHigher melt capacity by increasing the surface area of the heating wallsFlow Rate gains between 25 and 65%Competitive price/performance priceMachined with ultra-precisionCopper body and Hardened Vanadium Steel inserts nozzle with Nickel coated surface

Introducing the GammaMaster Nozzle the newest nozzle technology by Slice Engineering, incorporating cutting-edge developments in metallurgy and surface preparation. Gone are the days of compromising thermal performance while printing with abrasive filaments, as GammaMaster offers the ultimate solution. Engineered specifically for abrasive filament printing, this RepRap nozzle boasts unmatched thermal conductivity without any compromises.

These are nozzles for high flow applications Increase the Max Volumetric Flow of your Spider hotend by 25-65%. They are manufactured by Bondtech in-house, and will fit the following hotends: Creality Spider Hotend Creality Spider Speedy Ceramic Hotend

Spare Puch-Pin for Antclabs BLTouch. Plastic version for BLTouch-Smart V2.0 and later.

All-metal kit, with overall high temperature resistance up to 500 ℃.

New Bondtech Internal Filament Sensor Extruder for Prusa Mini. This extruder is an evolution of our previous high-resolution extruder upgrade for the Prusa Mini.Filament Sensor The new filament sensor for Prusa Mini/+ may be mounted inside the extruder housing. The IFS Extruder for Prusa Mini may be used without the filament sensor. With a simple process it is easy to later update it to fit the Prusa Filament Sensor inside.Bondtech IFS Extruder For Prusa Mini or Mini+Bondtech IFS ExtruderFits Prusa Mini or Mini+

Revised Features New heat break with reinforced throat and revised radiator to prevent damage during installation and repairs New heat sink with wider opening for the filament path to more readily accept multi-material setups like the Prusa MMU or Mosaic Palette. Main Benefits The Mosquito Magnum prints up to 20% faster than any other hotend on the market A thermal insulator protects the extended melt zone from the effects of active cooling, and radiative heat loss. It has a heat transmission rate as low as 3 W/m*K, meaning you can have ultimate confidence in the speed of your print, while at the same time maintaining the high resolution benefits achieved with the standard Mosquito The melt zone is extended proximally upwards to maintain a small form factor A multi extrusion setup with both high flow and high resolution optimized designs can be created without needing to purchase new nozzles or make carriage modifications to accommodate hotends of different sizes Oh yeah, and you can change the nozzle with one hand. Mosquito Magnum is only available for 1.75 mm filament at this time.

This is a LGX Direct Drive Setup to use on Artillery Sidewinder X1, prepared to use Mosquito (screw mount) hotends from Slice Engineering. Hotend, fan and nozzle are included. The Mosquito fan needs a connector change that we perform on the fans ordered with this upgrade kit.

Phaetus Pump Set (without cooling liquid and Hotend)

This is a LGX™ upgrade kit to use on Prusa MK3S and MK3S+. Only with Mosquito or Mosquito Magnum hotends from Slice Engineering. A compatible X-carriage and Mosquito hotend are required. If you don’t have them yet, check and add the optional items below.

These are nozzles for High Flow applicationsThey are manufactured by Bondtech in-house.Features1 unit per packAvailable sizes : 0.60, 0.8, 1.0, 1.4 and 1.8mmOptimized for 1.75mm filamentRequires 8mm wrench

These are nozzles for High Flow applicationsThey are manufactured by Bondtech in-house.Features1 unit per packAvailable sizes : 0.60, 0.8, 1.0, 1.4 and 1.8mmOptimized for 1.75mm filamentRequires 8mm wrench

These are nozzles for High Flow applicationsThey are manufactured by Bondtech in-house.Features1 unit per packAvailable sizes : 0.60, 0.8, 1.0, 1.4 and 1.8mmOptimized for 1.75mm filamentRequires 8mm wrench

These are nozzles for High Flow applicationsThey are manufactured by Bondtech in-house.Features1 unit per packAvailable sizes : 0.60, 0.8, 1.0, 1.4 and 1.8mmOptimized for 1.75mm filamentRequires 8mm wrench

These are nozzles for High Flow applicationsThey are manufactured by Bondtech in-house.Features1 unit per packAvailable sizes : 0.60, 0.8, 1.0, 1.4 and 1.8mmOptimized for 1.75mm filamentRequires 8mm wrench

Master All Materials * Excel With Flexibles The LGX Shortcut Mosquito Printhead is a special unit that includes the LGX Large Gears eXtruder and the LGX Shortcut short filament path hotend based on Copperhead, that will master all materials and excel with the soft and flexible.

This is a LGX Shortcut Upgrade Kit to use on Prusa MK3S and MK3S+. It uses a short Mosquito hotend from Slice Engineering with a Bondtech heatsink. Requires a X-carriage You may download the x-carriage model, change it and/or print it yourself. Or validate the checkbox below to add it to your cart.

This is a LGX Shortcut Upgrade Kit to use on Prusa MK3S and MK3S+. It uses a short Copperhead hotend from Slice Engineering with a Bondtech heatsink. Requires a X-carriage You may download the x-carriage model, change it and/or print it yourself. Or validate the checkbox below to add it to your cart.