Filament & Resin

Snapmaker's TPU is a highly flexible and elastic filament with a shore hardness of 95A. The premium material is characterised by high abrasion resistance and dimensional stability. The TPU does not cause clogging of the nozzles but ensures smooth extrusion.Highlights:Optimized for high-speed printing at 80 to 100 mm/sPerfect flexibility with a Shore Hardness of 95AExcellent abrasion resistance with an elongation at break of 462.3 ± 21.1 (%)

PrimaSELECT™ PPSU Polyphenylsulfone (PPSU) is a high-performance amorphous thermoplastic that offers better impact and chemical resistance than PEI. PPSU can be used at temperatures up to 180 Cᵒ. Furthermore, PPSU has superior hydrolysis resistance compared to other amorphous thermoplastics, measured in steam autoclaving cycles, it can be steam sterilized virtually indefinitely. It is also resistant to common acids and bases over a wide temperature range.Material properties Polyphenylsulfone (PPSU):Better impact strength and chemical resistance than PEISuperior hydrolysis resistance – Virtually unlimited steam sterilizabilityResistant to acids and bases over a wide temperature rangeApplications in aerospace, automotive, dentistry & other medical applications

ASA (Acrylic styrene-acrylonitrile) is an opaque thermoplastic 3D printing filament with similar mechanical properties to ABS but superior UV and weather resistance. Therefore, it is commonly used in outdoor applications which can retain their color and properties. Raise3D’s Premium ASA filament is both ISO 9001 and ISO 14001 certified.FeaturesUV resistanceHigh impact and wear resistanceHigh heat resistanceHigh toughness

The PrimaCreator Value Jewellery Casting Pro Resin is a high quality, affordable casting resin that is super easy to use thanks to its high wax content. That means there is no need for expensive gypsum materials and casting equiptment shrinkage and its ability to reproduce super fine details. HighlightsOptimized for UV light source 395 – 405 nmFast curing time, 6-8s Per Layer (depending on colour) for quicker prints. (Monochrome LCD)After finished 3D printing clean your print in IPA (Isopropyl Alcohol) or PrimaCreator Resin Cleaner to rinse off extra resin leftPrimaValue Resins work on several 3D printersWhen it´s time for curing you can use sunlight or a UV curing chamber.

The PrimaCreator Value Jewellery Casting Resin is a high quality, affordable casting resin for Jewellery. It is formulated in such a way that makes it easy to use, with no-ash burn out, low shrinkage and its ability to reproduce super fine details.Features:Optimized for UV light source 395 405 nmFast curing time, 6-8s Per Layer (depending on colour) for quicker prints. (Monochrome LCD)After finished 3D printing clean your print in IPA (Isopropyl Alcohol) or PrimaCreator Resin Cleaner to rinse off extra resin leftPrimaValue Resins work on several 3D printersWhen its time for curing you can use sunlight or a UV curing chamber.