Outlet

FLSun S1 features a build volume of 320 x 320 x 430 mm and is focused on high-speed printing – claiming a max speed of 1,200 mm/s, acceleration of up to 40,000 mm/s, and a volumetric flow rate of 110 mm. The S1 also leverages a closed-loop stepper motor system and an all-metal hot end rated to 350 °C. Theres also microtac radar, which works to improve print quality, accuracy, flow, and prints first layers. Highlights1200mm/s Max Speed and 40000mm/s Acceleration 320 x 320 x 430 mm Large Build VolumeMicrotac Radar to Control Printing Quality and AccuracyAll Metal Hotend can Reach to 350°CEquipment Self-check to Maintain Printer Stability

Smaller, lighter, and better than ever before, our Revo Micro HotEnd uses the smallest heatsink we’ve produced so far. Weighing in at only 30g, use Revo Micro to squeeze more speed performance from your motion system. Adaptable to Bowden or direct drive setups, Revo Micro is fully compatible with our Revo ecosystem, so you can easily change nozzles without tools or hot tightening at room temperature, using just your fingers. With an anodised black heatsink, not only does Revo Micro run cool – it looks cool, too. Designed for use with Revo Nozzles Works with a Revo HeaterCore for faster heat-ups Smallest and lightest HotEnd we’ve produced so far Titanium-like performance Ultra-lightweight construction for improved speed performance Compatible with popular 3D printers including Creality, Ender, Prusa, Anet, Biqu, Monoprice and many more

Are you a professional and have high demands on quality and performance of your 3D printer? Then the Zortrax M300 Dual is the FFF 3D printer of your choice. 3D print with two extruders and nozzles with water-soluble support material and the filament of your choice. The Zortrax M300 Dual also offers many other intelligent features. Zortrax M300 Dual – the most important features: 3D print complex undercuts and overhangs with support material thanks to two extruders Large building volume of 265x265x300 mm for considerable components Wi-Fi, USB and Ethernet for superior connectivity Power failure protection, color display, touch screen

The Bambu Lab H2S AMS Combo is a reliable and high-performance 3D printer with a spacious build volume, automatic filament management, and advanced monitoring. It handles a wide range of materials, offers excellent precision, and prints at impressive speeds — making it a strong choice for both hobbyists and professionals. Key Features Large build volume: 340 × 320 × 340 mmAutomatic filament handling with AMS 2 Pro (expandable up to 16 spools)Servo-driven extruder with optical calibration for high precisionNozzle up to 350 °C and heated chamber up to 65 °CReal-time monitoring with sensors and camerasPrint speeds up to 1000 mm/s

The Bambu Lab X2D is the second-generation printer in the acclaimed X Series, now optimized for advanced dual-material workflows. Featuring an innovative dual-nozzle system, it combines a Direct Drive head for model materials with a Bowden-fed auxiliary head for support structures. This makes the X2D the ultimate tool for creating complex engineering components requiring specialized supports for a flawless finish on a build volume of up to 256 x 256 x 260 mm.   Highlights Nozzle Switching Mechanism: Mechanical switching tested for over 1 million cycles without loss of performance. Hybrid Extrusion: Direct Drive for main material and Bowden for support material. Build Volume: Print capacity up to 256 x 256 x 260 mm (235.5 x 256 x 256 mm in dual-nozzle mode). Sensor-Driven Precision: 31 sensors continuously monitor material flow, temperature, and safety. Active Chamber: Heated build chamber up to 65 °C for engineering materials. Advanced Filtration: Three-stage air purification with G3 pre-filter, HEPA H12, and activated carbon. Quiet and Accurate: Noise level below 50 dB and motion accuracy down to 50 µm (with optional Vision Encoder).