Snapmaker

The Snapmaker Toolhead USB-C Cable (2-Pack) is a reliable replacement accessory designed specifically for the Snapmaker U1. It ensures stable communication between the toolhead and the HUB board, helping your machine operate smoothly during printing. Built with durability in mind, the cable features a wear-resistant design and a secure connector for consistent performance. With two cables included, it is a practical spare part that helps keep your printer running without interruptions. Key Features Fast and stable data transmission between toolhead and HUB board Designed specifically for Snapmaker U1 compatibility Durable, wear-resistant cable construction Secure mistake-proof connector for reliable installation Easy cable management with clips or ties Supplied as a practical 2-pack spare set

The Snapmaker Filament Runout Sensor Kit for U1 is a genuine replacement component designed to improve printing reliability and prevent failed prints. It monitors the filament feeding status in real time and automatically pauses the printer if filament runs out or becomes jammed. By saving the print progress, it helps avoid wasted material and lost printing time. Compact and easy to install, this sensor kit is ideal for maintenance or upgrading your Snapmaker U1. Key Features Genuine filament runout sensor kit for Snapmaker U1 Real-time monitoring of filament feeding status Detects filament depletion, runout, or jams Automatically pauses printing and saves progress Helps reduce failed prints and material waste Includes sensor kit and mounting screws

The Snapmaker U1 Part Cooling Duct Kit is a replacement component designed to direct airflow from the part cooling fan precisely toward the printed model. By guiding the air exactly where it is needed, it improves cooling efficiency and helps printed layers solidify quickly. This results in cleaner details, better surface quality, and improved performance when printing overhangs. It is specifically developed for the Snapmaker U1, ensuring an accurate fit and reliable cooling performance. Key Features Designed specifically for the Snapmaker U1 3D printer Directs airflow from the part cooling fan for improved cooling Helps printed layers solidify quickly for cleaner details Provides better overhang performance and improved surface quality Lightweight plastic construction Includes cooling duct and cover for easy replacement

The Snapmaker Toolhead PCB is an essential replacement component designed specifically for the Snapmaker U1. It manages communication between the printer’s main control board and the toolhead, ensuring stable signal transfer and accurate control of key functions. With integrated pogo pins and a durable design, it helps maintain reliable toolhead performance during demanding printing tasks. Whether you are replacing a worn component or performing maintenance, this PCB helps keep your printer operating smoothly. Key Features Designed specifically for Snapmaker U1 compatibility Ensures stable signal transmission between the main board and toolhead Controls temperature sensor and cooling fan operation Integrated pogo pins rated for up to 250,000 swaps Reliable replacement for worn or damaged toolhead boards Helps maintain stable and accurate printing performance

The Toolhead Thermistor (4-Pack) for Snapmaker U1 is a practical replacement set designed to maintain accurate temperature monitoring in your printer’s hot end. Thermistors play a crucial role in controlling the heating process by continuously measuring temperature and sending real-time feedback to the printer’s mainboard. With reliable temperature sensing, they help ensure stable extrusion and consistent print quality. Key Features Replacement thermistor set designed for Snapmaker U1 Provides real-time hot end temperature detection Helps maintain stable and accurate temperature control Reduces the risk of printing failures caused by incorrect temperatures Designed for seamless integration with the Snapmaker U1 hot end Includes four thermistors for convenient replacement or spare parts

The Snapmaker U1 Hot End Cooling Fan is a replacement component designed to maintain stable temperatures around the hot end during printing. By providing efficient airflow, it helps prevent heat creep and keeps filament from softening too early inside the extruder. The result is more consistent extrusion and fewer printing interruptions. Designed specifically for the Snapmaker U1, it ensures reliable performance and long-term durability. Key Features Designed specifically for the Snapmaker U1 3D printer Maintains stable hot-end temperature through efficient airflow Helps prevent heat creep and nozzle clogging High-speed 2510 fan rated up to 19,000 RPM 24 V operating voltage with long service life Lightweight replacement part with easy installation

The Snapmaker Textured PEI Steel Plate for the U1 is designed to deliver reliable first-layer adhesion and easy print removal. Its textured PEI surface keeps prints firmly in place during printing while allowing them to release smoothly once the plate cools. Built on a flexible spring steel base, it combines durability with convenience for everyday 3D printing. Whether you're producing prototypes or functional parts, this build plate helps ensure consistent results and a clean finish. Key Features Textured PEI surface for excellent first-layer adhesion Flexible spring steel plate for quick and easy print removal Reduces warping and lifting during printing Durable construction designed for repeated heating cycles Compatible with common filaments such as PLA, PETG, ABS, and TPU Designed specifically for the Snapmaker U1

The Snapmaker 3.5-Inch Touchscreen for U1 is a genuine replacement display designed to provide clear and responsive control of your Snapmaker U1 3D printer. With its compact high-definition screen and intuitive interface, it allows you to monitor print status, adjust settings, and navigate printer functions directly from the front panel. Built specifically for the U1, the touchscreen integrates seamlessly with the printer’s control system. It is an ideal replacement component for maintenance or repairs. Key Features Genuine replacement touchscreen for Snapmaker U1 3.5-inch high-definition display Responsive touch control for printer operation Clear interface for monitoring print status and settings Designed for direct compatibility with the U1 control system Includes one touchscreen module

The Ceramic Heaters Kit (4-Pack) for Snapmaker U1 is a convenient replacement set designed to keep your printer running reliably. These ceramic heaters are built into the hot end and provide efficient, stable heating for consistent extrusion performance. With fast heat-up and dependable temperature control, they help maintain print quality across a wide range of materials. Key Features Replacement ceramic heater set designed for Snapmaker U1 Efficient heating capable of reaching up to 300 °C Stable temperature control for consistent extrusion Supports a wide range of common 3D printing materials Designed for integration with the Snapmaker U1 hot end Includes four heaters plus installation accessories

The Snapmaker Toolhead Rear Cover for U1 is a compact replacement part designed to help protect the internal components of the toolhead. By sealing the rear of the toolhead housing, it prevents dust, lint, and debris from entering sensitive areas. Its magnetic design allows for quick, tool-free installation and removal whenever maintenance is required. Lightweight and durable, it helps keep your Snapmaker U1 running smoothly while maintaining a clean and protected toolhead environment. Key Features Genuine rear cover for the Snapmaker U1 toolhead Prevents dust, lint, and debris from entering the toolhead Magnetic attachment for quick installation and removal Tool-free design for easy maintenance access Lightweight plastic construction Includes one rear cover

The Snapmaker Nozzle Cleaning Brushes & Parking Pads Kit for U1 is designed to help maintain clean nozzles and stable toolhead parking on your Snapmaker U1 printer. By removing excess filament and residue during operation, the brushes support consistent extrusion and improved print reliability. The included parking pads provide a stable resting surface for toolheads when not in use, helping protect components and maintain proper alignment. Together, these maintenance parts help keep your printer running smoothly and efficiently. Key Features Helps keep nozzles clean by removing excess filament residue Supports consistent extrusion and stable print quality Includes parking pads for secure toolhead resting positions Designed specifically for the Snapmaker U1 system Reduces buildup that can affect printing performance Simple replacement for routine printer maintenance

This is a set of 2 reserve Hotends for Snapmaker J1. The set can be used with a variety of materials. The Hardened Hotend is optimized for engineering applications, supporting Nylon, Carbon Fiber Reinforced Nylon, Glass Fiber Reinforced NylonHighlights:Can be used on a wide range of materialsCovered with siliconeHigh quality

This is a replacement hotend compatible with Dual Extrusion 3D Printing Module for Snapmaker 2.0 and Snapmaker Artisan. The hotend can be used with a variety of materials: ABS, ASA, TPU, Breakaway PLA, PVA and HIPS.Highlights:For a variety of materialsAutomatic size detection by LubanHigh-qualityCan be changed tool-free in a few seconds

The Snapmaker U1 Hot End Silicone Sock (4-Pack) is a practical accessory designed to protect the heater block and keep your printer running clean and efficiently. Made from high-temperature resistant silicone, these insulation covers help stabilize temperature during printing and reduce filament buildup around the nozzle. The result is improved print quality, safer operation, and easier maintenance for your Snapmaker U1. Key Features High-temperature resistant silicone insulation Protects the hot end heater block from residue and damage Helps stabilize temperature for consistent prints Reduces filament sticking to the nozzle Improves overall print quality and safety Designed specifically for Snapmaker U1 printers

The Snapmaker Extruder Unit for U1 is a genuine replacement component designed to maintain reliable filament feeding and stable printing performance. Built specifically for the Snapmaker U1, this pre-assembled extrusion unit combines durability with easy installation. Its hardened steel gear drive provides strong and consistent extrusion, while integrated filament runout detection helps prevent failed prints. Ideal for maintenance or repairs, it helps keep your printer operating smoothly and efficiently. Key Features Genuine replacement extruder unit for Snapmaker U1 Hardened steel gear drive for strong, slip-resistant extrusion Integrated filament runout detection system Pre-assembled design for easy replacement Supports stable and consistent filament feeding Includes extruder unit and mounting screws

The Snapmaker Hub Adapter Board for U1 is a genuine replacement component designed to expand the connectivity of the Snapmaker U1’s main control board. Acting as an intermediate circuit board, it converts a single interface into multiple connections, allowing additional modules or components to be integrated into the printer’s system. Compact and lightweight, the adapter board helps improve hardware flexibility while maintaining stable communication between connected devices. It is an ideal solution for maintenance or upgrades within the Snapmaker U1 electronics system. Key Features Genuine hub adapter board for Snapmaker U1 1-to-4 interface expansion for the main control board Improves hardware connectivity within the printer system Reliable intermediate PCB for stable signal transmission Compact and lightweight design Includes one adapter board

The Left Nozzle Wiper for Snapmaker U1 is a replacement component designed to keep your printer’s nozzle clean during operation. Positioned beneath Toolhead 1, it automatically removes excess filament and residue before printing resumes. This helps maintain consistent extrusion, reduces the risk of clogs, and supports reliable print quality. The gentle wiping material also protects the nozzle surface while ensuring efficient cleaning. Key Features Keeps the nozzle clean by removing filament residue automatically Reduces the risk of clogs and inconsistent extrusion Protects the nozzle with a gentle, scratch-safe wiping surface Designed specifically for Toolhead 1 on the Snapmaker U1 Enables automatic nozzle cleaning without manual maintenance Simple replacement with included mounting screws

The Snapmaker Screw Set for U1 is a convenient replacement kit designed to secure and maintain key components of the Snapmaker U1 3D printer. It includes a selection of precisely sized screws used across different parts of the machine, making it ideal for maintenance, repairs, or replacing lost hardware. With durable materials and reliable fit, this set helps keep your printer properly assembled and operating smoothly. Key Features Complete screw set for maintenance and replacement Designed specifically for the Snapmaker U1 Durable metal screws for secure fastening Helps maintain stable and reliable assembly Suitable for multiple components of the printer Compact kit for easy storage and access

The Snapmaker U1 PEI Steel Sheet is a high-quality build plate designed to provide the best possible adhesion for your 3D prints. Made of robust steel with a special PEI coating, it ensures that your plastic sticks firmly during printing but releases easily once the plate has cooled. This is the perfect accessory for anyone seeking a reliable, flat, and user-friendly printing surface for their Snapmaker U1. Highlights: Excellent Adhesion: The PEI surface ensures materials like PLA, PETG, and ABS stay in place without the need for glue. Robust Steel Plate: Provides an extremely flat surface, crucial for large-scale prints on the Snapmaker U1. Durable Construction: Resistant to high temperatures and wear for long-lasting use in industrial environments. Easy to Clean: Requires minimal maintenance, usually just a bit of isopropyl alcohol. Magnetic Mounting: Designed to stay perfectly still during printing while remaining easy to remove when needed.

Artisan is Snapmaker’s latest generation of 3-in-1 3D printer. Larger, stronger, and more accessible than ever, it's going to be your next desktop powerhouse. Highlights:300°C dual extrusion 3D printing10W high power laser engraving and cutting200W CNC carving and cutting400 × 400 × 400 large work areaFree 3-in-1 software: Snapmaker LubanLaser-proof enclosure included

Overall featuresTailor-made Filter Cartridge for PM and VOCs filtrationHigh filtration efficiency of 95.9% for PM0.3Real-time monitoring on the Filter Cartridge status and lifespanFan speed controlColor Status LightConsistant full-metal designCompatible with all current and future Snapmaker 2.0 addonsThe Air Purifier must be used together with the Enclosure for Snapmaker 2.0

The Snapmaker Part Cooling Fan Adapter Board is a genuine replacement component designed for the Snapmaker U1 3D printer. It connects the part cooling fan to the printer’s main control board, allowing the system to regulate fan speed and maintain effective cooling during printing. Proper cooling helps ensure consistent print quality and stable thermal performance. This pack includes two adapter boards and mounting screws for convenient maintenance or replacement. Key Features Genuine replacement part for Snapmaker U1 Connects the cooling fan to the main control board Enables precise fan speed control Helps optimize heat dissipation during printing Supports consistent print quality and stable operation Includes two adapter boards and mounting screws

Basswood is ideal for laser engraving and CNC cutting. Its soft, fine, and even texture makes it easy to work with, while its pale and inconspicuous color doesn't take away the details of the engraved patterns of the finished product (which also makes the wood itself easier to paint and color).

MDF (Medium-density fibreboard) is an engineered wood product formed by breaking down hardwood or softwood residuals into wood fibers, often in a defibrator, combining it with wax and a resin binder, and forming panels by applying high temperature and pressure.MDF is more dense than plywood. It is made of separated fibers, but can be used as a building material similar to plywood. It is stronger and much more dense than normal particle board. Grain and color may vary from sheet to sheet.

The Snapmaker Artisan 3-in-1 Premium Printer is a top-of-the-line multifunctional machine that integrates high-precision 3D printing, laser engraving, and CNC carving into one seamless device. The Premium version boasts enhanced precision, superior components, a more powerful laser and broader material compatibility.Highlights400 x 400 x 400 large work areaDual Extrusion 3D Printing40W Laser200W CNCLaser Class 1 SafetyFree 3-in-1 software Snapmaker Luban