Makera

  • Makera - Stainless Low Profile Hex Screw (10pcs) M5 x 30 mm

    Makera

    Makera - Stainless Low Profile Hex Screw (10pcs) M5 x 30 mm
    No Reviews

    The low-profile hex socket screws are identical to those included in the machine tool kit and are used to secure the L Bracket, Top Clamp, and Side Clamp. Each pack contains 10 screws.

      In Stock (2)
    £2.50
  • Makera - Stainless Low Profile Hex Screw (10pcs) M5 x 20 mm

    Makera

    Makera - Stainless Low Profile Hex Screw (10pcs) M5 x 20 mm
    No Reviews

    The low-profile hex socket screws are identical to those included in the machine tool kit and are used to secure the L Bracket, Top Clamp, and Side Clamp. Each pack contains 10 screws.

      In Stock (1)
    £1.69
  • Makera - 1.5mm Blank PCB Boards Single sided - 150 mmx200 mm

    Makera

    Makera - 1.5mm Blank PCB Boards Single sided - 150 mmx200 mm
    No Reviews

    Crafted from durable FR4 fiberglass and accurately layered copper, this board is perfect for prototyping, hobby electronics, or advanced electronic manufacturing.

      In Stock (10)
    £2.90
  • Makera - 1.5mm Blank PCB Boards Double Sided - 150x200 mm

    Makera

    Makera - 1.5mm Blank PCB Boards Double Sided - 150x200 mm
    No Reviews

    Crafted from durable FR4 fiberglass and accurately layered copper, this board is perfect for prototyping, hobby electronics, or advanced electronic manufacturing.

      Out of stock - Unknown delivery date
    £1.50
  • Makera - 1.5mm Blank PCB Boards Single Sided - 100 mm x 150 mm

    Makera

    Makera - 1.5mm Blank PCB Boards Single Sided - 100 mm x 150 mm
    No Reviews

    Crafted from durable FR4 fiberglass and accurately layered copper, this board is perfect for prototyping, hobby electronics, or advanced electronic manufacturing.

      Out of stock - Unknown delivery date
    £0.79
  • Makera - 1.5mm Blank PCB Boards Double Sided - 100 mmx150 mm

    Makera

    Makera - 1.5mm Blank PCB Boards Double Sided - 100 mmx150 mm
    No Reviews

    Crafted from durable FR4 fiberglass and accurately layered copper, this board is perfect for prototyping, hobby electronics, or advanced electronic manufacturing.

      Out of stock - Unknown delivery date
    £0.79
  • Makera - Double Sided Transparent Fixation Tape 20mm x 50m

    Makera

    Makera - Double Sided Transparent Fixation Tape 20mm x 50m
    No Reviews

    Makera Strong Fixation Transparent Double-Sided Tape is a high-performance adhesive solution designed for precise bonding in CNC machining and other precision applications. With a thickness of approximately 0.2 mm, this tape offers a strong yet discreet hold, ensuring minimal interference with your workpieces. Key FeaturesTransparent for minimal visibilityHeat-resistant and waterproofLeaves minimal residue upon removalWidth 20 mmLength 50 mmThickness ~0.2 mm

      Out of stock - Unknown delivery date
    £7.50
  • Makera - Thread Milling Bit - 1/8" Shank - M4 (d3.15 mm) x 12 mm

    Makera

    Makera - Thread Milling Bit - 1/8" Shank - M4 (d3.15 mm) x 12 mm
    No Reviews

    This premium Thread Milling Bit is specifically engineered for precision internal threading in a variety of materials. Designed to fit the Makera Carvera and other CNC machines with a 1/8 inch collet, it ensures clean, consistent threads every time. Perfect for functional parts, prototyping, and custom mechanical buildsKey FeaturesCompatible with 1/8 inch collet CNC spindlesDesigned for precise internal threadingWorks with metal, plastic, and composite materialsOptimized for use with Makera CarveraLong tool life with high wear resistanceSuitable for small-scale and fine-detail applications

      Out of stock - Unknown delivery date
    £9.00
  • Makera Copper Sheet 5mm / 100mm x 200mm

    Makera

    Makera Copper Sheet 5mm / 100mm x 200mm
    No Reviews

    Our copper sheet is available in three thickness options (1 mm, 3 mm, 5 mm) with a standard width of 100 mm and optional length of 200 mm. It’s designed for versatility across industry, craft, electronics and prototyping applications. Each variant is precision-cut, offering clean edges and consistent thickness. Highlights High conductivity and thermal properties Excellent formability and machinability Uniform thickness and straight edges Suitable for etching, cutting, bending Available in length 100 mm or 200 mm Ready to ship, in stock

      Out of stock - Unknown delivery date
    £25.00
  • Makera Epoxy Tooling Board 10mm / 100mm x 150mm

    Makera

    Makera Epoxy Tooling Board 10mm / 100mm x 150mm
    No Reviews

    The Epoxy Tooling Board is a dense, homogeneous resin board engineered for high-precision machining and tooling. It’s available in thicknesses of 10 mm and 20 mm, with dimensions 100 × 150 mm or 150 × 200 mm. Designed for smooth cutting, stable behavior, and reliable repeatability in prototyping and tooling applications. Key Features Uniform density and structure throughout Excellent machinability with minimal variation Smooth surface finish for fine detail High dimensional stability Low tool wear during cutting Stocked and ready to ship

      Out of stock - Unknown delivery date
    £4.00
  • Makera Epoxy Tooling Board 10mm / 150mm x 200mm

    Makera

    Makera Epoxy Tooling Board 10mm / 150mm x 200mm
    No Reviews

    The Epoxy Tooling Board is a dense, homogeneous resin board engineered for high-precision machining and tooling. It’s available in thicknesses of 10 mm and 20 mm, with dimensions 100 × 150 mm or 150 × 200 mm. Designed for smooth cutting, stable behavior, and reliable repeatability in prototyping and tooling applications. Key Features Uniform density and structure throughout Excellent machinability with minimal variation Smooth surface finish for fine detail High dimensional stability Low tool wear during cutting Stocked and ready to ship

      Out of stock - Unknown delivery date
    £9.00
  • Makera Epoxy Tooling Board 20mm / 150mm x 200mm

    Makera

    Makera Epoxy Tooling Board 20mm / 150mm x 200mm
    No Reviews

    The Epoxy Tooling Board is a dense, homogeneous resin board engineered for high-precision machining and tooling. It’s available in thicknesses of 10 mm and 20 mm, with dimensions 100 × 150 mm or 150 × 200 mm. Designed for smooth cutting, stable behavior, and reliable repeatability in prototyping and tooling applications. Key Features Uniform density and structure throughout Excellent machinability with minimal variation Smooth surface finish for fine detail High dimensional stability Low tool wear during cutting Stocked and ready to ship

      Out of stock - Unknown delivery date
    £13.50
  • Carvera Commonly Used Milling Bit Bundle

    Makera

    Carvera Commonly Used Milling Bit Bundle
    No Reviews

    Carefully selected milling bits bundle, chosen for its popularity, supports the processing of soft metals, wood, plastics, and composite materials. It is suitable for cutting, milling, chamfering, and threading operations. The set is capable of both fine and rough machining.

      In Stock (1)
    £209.00
  • Makera - Carvera Air Wired Probe

    Makera

    Makera - Carvera Air Wired Probe
    No Reviews

    The Carvera Air Wired Probe is an essential accessory designed to streamline the tool setup process for your Carvera Air CNC machine. This wired probe ensures consistent and accurate tool height measurements, enhancing the precision of your machining tasks.Key featuresConsistent tool height measurements for improved accuracyWired connection ensures reliable data transmission Easy integration with Carvera Air CNC machineDurable construction for long-lasting performance Ideal for precise milling and engraving tasks

      In Stock (4)
    £89.00
  • Makera - Carvera Air 2mm MDF Spoil Board - 5pk

    Makera

    Makera - Carvera Air 2mm MDF Spoil Board - 5pk
    No Reviews

    The Carvera Air 2mm MDF Spoil Board is a custom accessory designed to protect your CNC machines work surface while providing a smooth and stable base for your projects. Laser-cut for precision and pre-drilled for easy installation, this 5-pack offers a practical and cost-effective solution for both hobbyists and professionals.Key FeaturesDesigned specifically for Carvera Air CNC machines Laser-cut for perfect fit with pre-drilled mounting holes Protects the machines original work surface from damage Enables full material cut-through without harming the base Supports creation of custom fixtures and workpiece positions Convenient 5-pack for extended use

      In Stock (1)
    £16.00
  • Makera - UV Solder Mask Removal Tool - 1/8" Shank

    Makera

    Makera - UV Solder Mask Removal Tool - 1/8" Shank
    No Reviews

    The Makera UV Solder Mask Removal Tool is a precision-engineered accessory designed for the meticulous task of removing UV-cured solder mask from printed circuit boards (PCBs). With its spring-loaded mechanism and fine engraving tip, it ensures clean and accurate removal without damaging the underlying copper traces. Key FeaturesStainless SteelSpring-loaded mechanism for controlled engravingIdeal for removing UV-cured solder mask without affecting copper tracesShank Diameter 3.175 mm (1/8)Tip Diameter 0.3 mmTotal Length Approximately 50 mm

      Out of stock - Unknown delivery date
    £55.00
  • Makera - Bits Collar (100pcs) 4 mm

    Makera

    Makera - Bits Collar (100pcs) 4 mm
    No Reviews

    The Makera Bits Collar is a precision accessory designed for the Carvera CNC machines automatic tool changer system. Each collar securely holds a specific tool shank size, ensuring accurate tool changes and consistent machining results. This 100-piece set provides ample replacements for extended use. Key FeaturesIncludes 100 collars per packAvailable in multiple sizes 1/8(3,175mm), 3mm, 4mm, 6mm, and 1/4 (6,35mm)Designed for Carvera CNC machines auto tool changerEnsures secure and precise tool holdingFacilitates quick and accurate tool changesIdeal for various CNC machining tasks

      Out of stock - Unknown delivery date
    £9.00
  • Makera - Thread Milling Bit - 1/8" Shank - M2.5 (d1.95 mm) x 7.5 mm

    Makera

    Makera - Thread Milling Bit - 1/8" Shank - M2.5 (d1.95 mm) x 7.5 mm
    No Reviews

    This premium Thread Milling Bit is specifically engineered for precision internal threading in a variety of materials. Designed to fit the Makera Carvera and other CNC machines with a 1/8 inch collet, it ensures clean, consistent threads every time. Perfect for functional parts, prototyping, and custom mechanical buildsKey FeaturesCompatible with 1/8 inch collet CNC spindlesDesigned for precise internal threadingWorks with metal, plastic, and composite materialsOptimized for use with Makera CarveraLong tool life with high wear resistanceSuitable for small-scale and fine-detail applications

      In Stock (1)
    £9.00
  • Makera Clear Acrylic Sheet Plate 3mm / 150mm x 200mm

    Makera

    Makera Clear Acrylic Sheet Plate 3mm / 150mm x 200mm
    No Reviews

    This is a clear acrylic sheet (3 mm thick) available in two compact sizes: 100 × 150 mm and 150 × 200 mm. It offers excellent transparency, good rigidity, and versatile machinability, making it ideal for small-scale projects, prototyping, signage, and protective covers. The product balances durability with ease of use for hobbyists, makers, and light industrial applications. Key Features Ultra-clear and optically transparent 3 mm thickness for a balance of strength and lightness Offered in two convenient sizes (100×150, 150×200 mm) Easy to machine, cut, drill or shape Can be glued, laser cut, hot formed, and printed Suitable for protective covers, displays, model work

      Out of stock - Unknown delivery date
    £4.00
  • Carvera Dust Collector Adapter

    Makera

    Carvera Dust Collector Adapter
    No Reviews

    The Carvera Dust Collector Adapter is an upgrade cable that enables automated control of the Makera Cyclone Dust Collector when used with the original Carvera CNC machine. The Carvera (non-Air model) does not have a built-in EXT port, which means the automatic G-code triggered start/stop function of the Cyclone Dust Collector is not natively supported. This adapter bridges that gap, allowing the dust collector to start and stop automatically in sync with the machining job — without manual intervention. The adapter is now included with current purchases of the Makera Cyclone Dust Collector. Users who received a Cyclone before the adapter was added to the package will need to obtain it separately to enable automated control. Note: This adapter is only required for the original Carvera. It is not needed for the Carvera Air, which has a built-in EXT port and supports automated dust collector control natively. Key Features Enables automated G-code triggered control of the Makera Cyclone Dust Collector on the original Carvera Compensates for the missing EXT port on the original Carvera Allows the dust collector to start and stop automatically with each machining job Requires Carvera firmware v1.0.5 or later and Makera Controller v0.9.13 or later Compatible with the Makera Cyclone Dust Collector

      Out of stock - Unknown delivery date
    £9.00
  • Filter Cartridge for Makera Cylcone Dust Collector

    Makera

    Filter Cartridge for Makera Cylcone Dust Collector
    No Reviews

    This replacement filter cartridge is designed specifically for the Makera Cyclone Dust Collector. Highlights: Triple-layer structure: pre-filter, HEPA, and activated carbon High filtration performance Tool-free cartridge replacement Compatible with Makera Cyclone Dust Collector

      Out of stock - Unknown delivery date
    £38.00
  • Makera - Carvera Air MDF Bed

    Makera

    Makera - Carvera Air MDF Bed
    No Reviews

    CNC machined MDF bed. This is a Replacement Part for your Carvera Air™.

      In Stock (4)
    £45.00
  • Makera - Carvera Air Laser Side Clamp Set - (2pcs)

    Makera

    Makera - Carvera Air Laser Side Clamp Set - (2pcs)
    No Reviews

    The Makera Side Clamp Set includes two high-quality aluminum clamps designed to securely hold workpieces thicker than 2 cm during CNC operations. These clamps are identical to the ones provided with the Carvera machine, ensuring consistent performance and reliability. Ideal for users seeking to enhance their CNC setup, this set offers robust support for various projects.Key FeaturesDesigned for workpieces thicker than 2 cm.Made of durable aluminum for long-lasting use.Includes two clamps to secure both sides of the workpiece.Compatible with the Carvera machine for seamless integration.Easy to install and adjust for optimal positioning.

      In Stock (2)
    £55.00
  • Makera - L Bracket (Thick)

    Makera

    Makera - L Bracket (Thick)
    No Reviews

    The Makera L-Bracket is a precision-engineered mounting accessory designed for use with the Carvera and Carvera Air CNC machines. This sturdy, L-shaped bracket plays a crucial role in accurately aligning and securing thicker workpieces during milling, engraving, and other CNC operations.Key FeaturesDesigned specifically for thicker workpieces (over 2 cm)Provides excellent stability and vibration control during machining Uses two 4 mm locating pins and three M5 screws for secure mountingRequires longer screws for added depth and gripIdeal when used with side clamps for firm and precise holdEnhances machining accuracy, especially on dense or heavy materials

      In Stock (2)
    £28.00
  • Makera - Top Clamp Set - (4pcs)

    Makera

    Makera - Top Clamp Set - (4pcs)
    No Reviews

    The Makera Top Clamp Set includes four precision-engineered clamps designed to securely hold materials during CNC machining. Crafted from durable materials, these clamps ensure stability and accuracy, making them an essential accessory for various CNC applications.Key FeaturesPrecision-engineered for secure material holdingCrafted from durable materials for long-lasting useDesigned to fit standard T-slot railsCompatible with Makera CNC machines Easy to install and adjust

      In Stock (2)
    £28.00
  • Makera - L Bracket (Thin)

    Makera

    Makera - L Bracket (Thin)
    No Reviews

    The Makera L-Bracket (Thin Version) is a precision-designed accessory made to work seamlessly with Carvera and Carvera Air CNC machines. This slim, L-shaped bracket is ideal for securely aligning thinner workpieces, ensuring stability and accuracy during detailed machining tasks.Key FeaturesSpecifically designed for workpieces less than 2 cm thickEnsures precise positioning and stability during machiningFeatures two semi-circular openings for additional M5 screws to secure the lower-left corner of the workpieceCompatible with top clamps for optimal grip on thinner materialsIdeal for high-precision work on delicate or small-scale projects

      In Stock (2)
    £15.00
  • Makera - Carvera Dust Filter - (2pcs)

    Makera

    Makera - Carvera Dust Filter - (2pcs)
    No Reviews

    This high-efficiency HEPA filter is a genuine replacement part designed specifically for the Makera Carvera™ dust collection system. It effectively captures fine dust and particles, helping to maintain a clean and safe working environment.

      Out of stock - Unknown delivery date
    £4.00
  • Makera - Spindle Collet  3.175 mm

    Makera

    Makera - Spindle Collet 3.175 mm
    No Reviews

    The Makera Spindle Collet is a high-precision component designed to ensure a secure grip for various tool shank sizes in your CNC spindle. Available in multiple diameters, it supports a wide range of milling and routing applications with enhanced accuracy and stability.Key FeaturesAvailable sizes 3,175 mm 4 mm, 6 mm, 6,35 mmMade from durable, high-strength steelEnsures tight grip and minimal runoutDesigned for use with Makera CNC spindlesEasy to install and swap between sizesSuitable for wood, plastic, and soft metal machining

      In Stock (2)
    £37.00
  • Makera - Bits Collar (100pcs) 6.35 mm

    Makera

    Makera - Bits Collar (100pcs) 6.35 mm
    No Reviews

    The Makera Bits Collar is a precision accessory designed for the Carvera CNC machines automatic tool changer system. Each collar securely holds a specific tool shank size, ensuring accurate tool changes and consistent machining results. This 100-piece set provides ample replacements for extended use. Key FeaturesIncludes 100 collars per packAvailable in multiple sizes 1/8(3,175mm), 3mm, 4mm, 6mm, and 1/4 (6,35mm)Designed for Carvera CNC machines auto tool changerEnsures secure and precise tool holdingFacilitates quick and accurate tool changesIdeal for various CNC machining tasks

      Out of stock - Unknown delivery date
    £9.00
  • Makera - Custom Tag Toolkit

    Makera

    Makera - Custom Tag Toolkit
    No Reviews

    The Makera Custom Tag Toolkit is a complete solution for creating high-quality personalized tags from metal and plastic. Designed to work seamlessly with the Carvera CNC machine and Makera CAM software, the kit includes all materials and accessories required for a smooth and precise tag-making process. Ideal for makers, hobbyists, and professionals who want to produce custom tags with efficiency and style.Key FeaturesIncludes aluminum, brass, copper, and dual-color plastic sheetsComes with 20 precision milling bits for engraving and cuttingIncludes 30 key rings and 5 sanding blocks for easy finishingFeatures double-sided tape for secure material setupOptimized for Carvera CNC and Makera CAM workflowSuitable for both creative and professional applications

      In Stock (2)
    £145.00
  • Makera 6061 Aluminium Block 50mm x 50mm / 200mm

    Makera

    Makera 6061 Aluminium Block 50mm x 50mm / 200mm
    No Reviews

    A solid 6061 aluminum block designed for machining and prototyping, offering excellent machinability and dimensional consistency. Whether you're cutting, milling, or turning, this block delivers a reliable base for precision parts. Available in multiple sizes to suit your project needs. Key Features High machinability Good strength-to-weight ratio Corrosion-resistant Tight dimensional tolerances Versatile for CNC and manual processes Available in multiple standard sizes

      Out of stock - Unknown delivery date
    £18.00
  • Makera 6061 Aluminium Block 50mm x 50mm / 100mm

    Makera

    Makera 6061 Aluminium Block 50mm x 50mm / 100mm
    No Reviews

    A solid 6061 aluminum block designed for machining and prototyping, offering excellent machinability and dimensional consistency. Whether you're cutting, milling, or turning, this block delivers a reliable base for precision parts. Available in multiple sizes to suit your project needs. Key Features High machinability Good strength-to-weight ratio Corrosion-resistant Tight dimensional tolerances Versatile for CNC and manual processes Available in multiple standard sizes

      Out of stock - Unknown delivery date
    £9.00
  • Makera 6061 Aluminium Block 35mm x 35mm / 100mm

    Makera

    Makera 6061 Aluminium Block 35mm x 35mm / 100mm
    No Reviews

    A solid 6061 aluminum block designed for machining and prototyping, offering excellent machinability and dimensional consistency. Whether you're cutting, milling, or turning, this block delivers a reliable base for precision parts. Available in multiple sizes to suit your project needs. Key Features High machinability Good strength-to-weight ratio Corrosion-resistant Tight dimensional tolerances Versatile for CNC and manual processes Available in multiple standard sizes

      Out of stock - Unknown delivery date
    £4.00
  • Makera 6061 Aluminium Block 35mm x 35mm / 200mm

    Makera

    Makera 6061 Aluminium Block 35mm x 35mm / 200mm
    No Reviews

    A solid 6061 aluminum block designed for machining and prototyping, offering excellent machinability and dimensional consistency. Whether you're cutting, milling, or turning, this block delivers a reliable base for precision parts. Available in multiple sizes to suit your project needs. Key Features High machinability Good strength-to-weight ratio Corrosion-resistant Tight dimensional tolerances Versatile for CNC and manual processes Available in multiple standard sizes

      Out of stock - Unknown delivery date
    £8.50
  • Makera Carbon Fiber Sheet 2mm / 200mm x 250mm

    Makera

    Makera Carbon Fiber Sheet 2mm / 200mm x 250mm
    No Reviews

    This carbon fiber sheet offers exceptional strength-to-weight performance in a sleek, modern material suited for precision parts. Available in 2 mm and 3 mm thicknesses (200 × 250 mm), it’s ideal for CNC machining, prototyping, structural panels and decorative elements. The composite’s inherent durability, rigidity and aesthetic appeal make it a versatile choice for makers, engineers and designers alike. Key Features High strength-to-weight ratio Low thermal expansion Excellent rigidity and dimensional stability Smooth, attractive surface finish CNC-machinable with proper tooling Available in 2 mm & 3 mm thickness

      In Stock (2)
    £13.00
  • Makera Carbon Fiber Sheet 3mm / 200mm x 250mm

    Makera

    Makera Carbon Fiber Sheet 3mm / 200mm x 250mm
    No Reviews

    This carbon fiber sheet offers exceptional strength-to-weight performance in a sleek, modern material suited for precision parts. Available in 2 mm and 3 mm thicknesses (200 × 250 mm), it’s ideal for CNC machining, prototyping, structural panels and decorative elements. The composite’s inherent durability, rigidity and aesthetic appeal make it a versatile choice for makers, engineers and designers alike. Key Features High strength-to-weight ratio Low thermal expansion Excellent rigidity and dimensional stability Smooth, attractive surface finish CNC-machinable with proper tooling Available in 2 mm & 3 mm thickness

      In Stock (2)
    £18.00

Are you sure you would like to remove this item from the shopping cart?

This item is a part of the approved quote. Removing it will remove all quote items from the cart.