Bambu Lab

Bus Cable 4pin for X1 Series & P1P

Enjoy the benefits of two different textures in one plate, one side is Textured PEI surface and the other side is Smooth PEI surface. This Plate features a 0.5mm magnetic stainless steel plate that enhances magnetic adhesion and helps to prevent warping and ensure optimal print quality during 3D printing.HighlightsEffortless print removalImproved durabilityHigh Z-axis precision printingSmooth and matte surface

The Bambu Smooth PEI Plate features a 0.125 mm smooth PEI surface laminated onto a 0.5 mm spring steel base, ensuring exceptional adhesion, durability, and precise first-layer aesthetics. Compatible with multiple filaments, it provides reliable performance for both standard and high-temperature materials. Key Features 0.125 mm smooth PEI sheet bonded to 0.5 mm spring steel Robust magnetic adhesion minimizes warping risk Matte finish delivers smooth, low-layer lines on prints Works with PLA, PETG, TPU, ABS, Nylon and more Enhances Z-axis precision for tight fit and tolerance Easy to mount, maintain, and compatible with X1/P1/A1 series

Bus Cable 6pin hub for X1 Series & P1P

Bus cable 6pin buffer for X1 Series & P1P

The Bambu Lab P1P Cooling Fan for Hotend is an original replacement fan that delivers targeted airflow to the hotend heatsink. It helps prevent heat creep, stabilizes extrusion, and keeps print quality consistent during long jobs. Key Features Designed specifically for Bambu Lab P1P hotend cooling Directs airflow to the heatsink to reduce heat creep Pre-wired connector for quick plug in replacement Consistent airflow for stable extrusion and clean surfaces OEM fit for reliable performance Simple installation using existing mounting points

The Bambu Lab TH Board for P2S is the toolhead control board that interfaces the print head’s components—such as the extruder, fans, heaters, and sensors—with the printer’s control system. It ensures stable signal transmission and reliable power distribution for accurate printing performance. As an original replacement part, it provides precise fit, consistent operation, and full compatibility with the P2S system. Key Features Original Bambu Lab replacement part for P2S Toolhead control board for fans, heater, sensors, and extruder Stable communication and reliable power distribution Supports accurate control and consistent print quality Durable design for easy, dependable installation

The Bambu Lab CyberBrick Hardware Kit brings modular and programmable electronics to makers of all levels. Whether you are just starting out or already experienced, CyberBrick offers a creative way to combine 3D-printed parts with smart hardware for custom vehicles, robots and interactive builds. Key Features Available in two versions: Beginner (ZK004) and Ultimate (ZK003). Modular electronics compatible with 3D-printed parts and various projects. Supports 2.4 GHz WiFi and Bluetooth for flexible control options. Programmed with MicroPython and configured via mobile or PC. Includes control boards, joysticks, motors, LED modules and more. Electronics only – 3D-printed shells or tools are not included.

The Bambu Lab Vision Encoder is a smart, plug-and-play accessory designed to enhance the accuracy and reliability of your 3D printing workflow. By tracking filament motion with high precision, it enables real-time error detection to help prevent failed prints and reduce material waste.Key FeaturesOptical sensor tracks filament movement with precisionDetects extrusion issues like clogs or tangles in real timeEnables smart print pausing and user alertsSimple plug-and-play integrationCompatible with Bambu Lab AMS and AMS Lite Lightweight and compact design for minimal interference

The Bambu Lab Textured PEI Plate (H2D) is a high-performance build surface engineered for consistent first-layer adhesion and long-term durability - especially when printing at elevated temperatures. With a rough-textured PEI coating on a spring steel base, this build plate is ideal for demanding materials and projects that require strong bed adhesion without the need for adhesives or sprays.Key FeaturesTextured PEI surface for excellent first-layer gripHigh-temperature compatibility (H2D model)No adhesives required – prints stick during the job and release when cooledScratch-resistant and warp-free spring steel constructionCompatible with Bambu Lab X1, X1 Carbon, and P1 series printersSupports PLA, PETG, TPU, ABS, PA, PC and more

The Bambu Lab Textured PEI Plate is a dual-sided, magnetic build surface designed for the A1 mini (180 × 180 × 180 mm) printer. Featuring a 0.5 mm stainless steel core coated both sides with 0.075 mm textured PEI, it provides excellent first-layer adhesion across a range of materials—from PLA to ABS—without glue, while enabling easy part removal when cooled. Key Features • Dual-sided textured PEI coating with magnetic stainless steel substrate • Exceptional adhesion—no glue needed for PLA, PETG, TPU (ABS possible) • Flexible plate releases prints cleanly after cooling to ~35 °C • Durable, wear-resistant surface tolerates hundreds of heat cycles • Easy cleaning with warm water or isopropyl alcohol—avoid acetone • Removable and replaceable; warranty covers only manufacturing defects

The Bambu Lab X1 Series Display Connector Flex Cable replaces the FPC that links the mainboard and front display on X1 / X1 Carbon / X1E. It restores stable video and touch communication for reliable operation. Key Features Genuine-spec FPC for Bambu Lab X1 Series Stable signal transmission for display and touch Precision connectors at both ends for secure fit Thin, flexible cable for easy routing Power off the printer before installation ESD-safe handling recommended

The Bambu Lab X1 Series Cooling Fan for Hotend ensures optimal temperature control and consistent extrusion. Designed for reliable cooling performance, it prevents heat creep and supports smooth, stable printing results. Key Features Efficient cooling for hotend temperature stability Prevents heat creep and extrusion issues Designed for the Bambu Lab X1 Series Quiet and durable fan operation Easy to install and replace

Enjoy the benefits of two different surfaces in one plate – one side features a textured PEI surface and the other a smooth PEI surface. The plate is made of a 0.5 mm magnetic stainless steel sheet, which improves magnetic adhesion, prevents warping, and ensures optimal print quality during 3D printing. Key Features Easy print removal Enhanced durability High Z-axis accuracy in printing Smooth and matte surface

The Bambu Lab P1P Toolhead Cable connects the printer headboard and the motion control mainboard to supply power and data communication. It ensures stable performance and smooth data transmission between the toolhead and the printer’s control system. Key Features Designed for Bambu Lab P1P 3D printers Provides stable power and signal transmission Durable construction for long-term reliability Easy to install and replace Ensures smooth communication between toolhead and mainboard

The Bambu Lab X1 Series / P1P HeatBed Signal Cable – C11 is a genuine replacement part designed to transmit signals between the heated bed and the mainboard. It ensures accurate temperature communication and stable bed performance for reliable and consistent printing. Key Features Original replacement cable for Bambu Lab X1 Series and P1P printers Provides stable and accurate signal transmission Ensures reliable temperature control of the heated bed Durable and high-quality construction for long-term use Easy to install and connect securely

The Bambu Lab Power Switch Assembly for P2S is an original replacement part designed to control the printer’s main power function. It ensures safe and reliable power operation and maintains full electrical compatibility with the P2S system. The assembly is built for long-term durability and easy installation. Key Features Original Bambu Lab replacement part for P2S Controls the printer’s main power function Ensures safe and stable electrical performance Fully compatible with the P2S system Durable design and simple installation

Auxiliary Part Cooling Fan for X1 Series & P1P

The Bambu Lab LED Light - Front is a dedicated chamber light for the P2S that mounts at the front of the printer. It provides bright and uniform illumination of the build area, helping you clearly monitor your prints at every stage.Key Features:Original Bambu Lab LED front light for the P2SMounts at the front of the print chamberProvides clear and even illumination across the entire build areaImproves visibility for setup, inspection and print monitoringEasy installation with guidance available on the Bambu Lab Wiki

The Bambu Lab Screen for P2S is a high-quality display module designed for clear and responsive interaction with the printer. It provides sharp visuals, intuitive navigation, and reliable performance, ensuring smooth operation during setup, monitoring, and adjustments. Key Features Original Bambu Lab spare part for P2S High-quality and responsive display module Clear and sharp interface for easy operation Reliable performance for daily printer use Perfect fit and straightforward installation

Dual-Sided Textured PEI Plate for X1 Series & P1P

The Bambu Lab X1 Series USB-C Cable is a dedicated replacement cable designed to ensure reliable and stable communication between the printer's components. Built with durability and precision in mind, it provides consistent data transfer and power delivery for optimal printer performance. Key Features High-quality USB-C cable for Bambu Lab X1 Series Ensures stable and reliable data transmission Durable construction for long-lasting performance Designed specifically for X1 Series printers Easy installation and perfect fit

The Bambu Lab X1 Series Chamber Temperature Regulator Fan is a genuine replacement part designed to maintain consistent internal temperature within the printer’s chamber. It ensures stable thermal conditions for improved print quality, dimensional accuracy, and reduced warping during high-performance 3D printing. Key Features Original Bambu Lab replacement part Maintains optimal chamber temperature for consistent printing Improves print quality and reduces material deformation Designed for efficient airflow and quiet operation Compatible with Bambu Lab X1 Series printers

The Bambu Lab CyberBrick Hardware Kit brings modular and programmable electronics to makers of all levels. Whether you are just starting out or already experienced, CyberBrick offers a creative way to combine 3D-printed parts with smart hardware for custom vehicles, robots and interactive builds. Key Features Available in two versions: Beginner (ZK004) and Ultimate (ZK003). Modular electronics compatible with 3D-printed parts and various projects. Supports 2.4 GHz WiFi and Bluetooth for flexible control options. Programmed with MicroPython and configured via mobile or PC. Includes control boards, joysticks, motors, LED modules and more. Electronics only – 3D-printed shells or tools are not included.

The Bambu Lab LED Light - Left is a dedicated chamber light strip for the P2S that mounts on the left side of the printer. It provides bright and even illumination of the build area so you can easily monitor your prints from start to finish.Key Features:Original Bambu Lab LED light strip for the P2SMounts on the left side of the print chamberProvides precise and even illumination of the entire build areaImproves visibility for setup, inspection and print monitoringEasy installation with guidance available on the Bambu Lab Wiki

The Bambu Lab Z Motor for P2S ensures precise vertical motion and stable printing performance. Designed as a direct replacement part, it provides smooth movement and reliable durability for consistent print quality. Key Features Original Bambu Lab replacement part for P2S Ensures accurate and stable Z-axis motion Durable construction for long-term reliability Easy installation with perfect compatibility

The Bambu Lab XY Motor for P2S delivers precise and stable motion across both X and Y axes, ensuring smooth and accurate printing results. As an original replacement part, it maintains consistent performance and long-term reliability for your P2S printer. Key Features Original Bambu Lab replacement part for P2S Controls precise X and Y axis movement Ensures smooth, accurate, and stable printing Durable and reliable construction Easy to install with perfect compatibility

The Bambu Lab Power Supply for P2S provides stable and efficient power delivery to the printer’s components. Designed as an original replacement part, it ensures consistent performance, reliable operation, and full compatibility with the P2S system. Built with high-quality materials for long-term durability and safety. Key Features Original Bambu Lab replacement part for P2S Provides stable and efficient power output Ensures reliable and consistent printer performance Designed for safety and long lifespan Fully compatible with the P2S system

The Bambu Lab Toolhead Cable for P2S is a dedicated connection cable that links the toolhead to the electronics of the printer. It carries signals and power between the modules to ensure reliable communication and stable print performance. Key Features Original Bambu Lab spare part for P2S Connection cable between toolhead and electronics Stable transmission of signals and power Helps maintain consistent print quality Durable design for long term use

The Bambu Lab TH Board FPC Cable is a flexible flat cable designed to connect the toolhead board to the mainboard in the Bambu Lab P2S. It ensures stable signal and power transmission for reliable and consistent print performance. Key Features Original Bambu Lab spare part Flexible FPC cable for the P2S toolhead Stable signal and power transmission Durable and reliable construction Easy installation with precise fit

The Bambu Lab Printer Cable Pack for P2S includes essential internal cables required for reliable data transmission and power delivery within the printer. Designed to connect key components such as the mainboard, toolhead, sensors, and power modules, these cables ensure stable communication and consistent performance. As original replacement parts, they guarantee precise fit and long-term durability for the P2S system. Key Features Original Bambu Lab replacement cable set for P2S Includes data and power cables for internal connections Ensures stable communication between printer components High-quality materials for safety and durability Perfect fit for easy installation and reliable performance

The Bambu Lab MC Board for P2S is the main control board responsible for managing core printer functions, communication and system coordination. Designed specifically for the P2S, it ensures stable performance, fast processing and reliable operation throughout all printing tasks. Key Features Original Bambu Lab spare part for P2S Main control board for system coordination Supports stable and efficient printer operation Reliable communication with all printer modules Durable design for long-term stability