Upgrades

Smaller, lighter, and better than ever before, our Revo Micro HotEnd uses the smallest heatsink weve produced so far. Weighing in at only 30g, use Revo Micro to squeeze more speed performance from your motion system. Adaptable to Bowden or direct drive setups, Revo Micro is fully compatible with our Revo ecosystem, so you can easily change nozzles without tools or hot tightening at room temperature, using just your fingers. With an anodised black heatsink, not only does Revo Micro run cool it looks cool, too. Designed for use with Revo Nozzles Works with a Revo HeaterCore for faster heat-ups Smallest and lightest HotEnd weve produced so far Titanium-like performance Ultra-lightweight construction for improved speed performance Compatible with popular 3D printers including Creality, Ender, Prusa, Anet, Biqu, Monoprice and many more

Revo Six is a drop-in replacement for your E3D V6 HotEnd, giving you all the benefits of E3D’s RapidChange Revo ecosystem in an easy-to-upgrade package. Compatible with Prusa MK2/3 (Check voltage before ordering) Same height, diameter, and mounting as the E3D V6 all-metal HotEnd No machine redesign needed - drops right into your existing setup Compatible with Revo Nozzles – swap nozzles at room temperature without tools or hot tightening Anodised black sink and crystal-clear fan mount with fan included Revo HeaterCore included for faster, safer heating

Revo Six is a drop-in replacement for your E3D V6 HotEnd, giving you all the benefits of E3D’s RapidChange Revo ecosystem in an easy-to-upgrade package. Compatible with Prusa MK2/3 (Check voltage before ordering) Same height, diameter, and mounting as the E3D V6 all-metal HotEnd No machine redesign needed - drops right into your existing setup Compatible with Revo Nozzles – swap nozzles at room temperature without tools or hot tightening Anodised black sink and crystal-clear fan mount with fan included Revo HeaterCore included for faster, safer heating

Revo Six is a drop-in replacement for your E3D V6 HotEnd, giving you all the benefits of E3Ds RapidChange Revo ecosystem in an easy-to-upgrade package. Compatible with Prusa MK2/3 (Check voltage before ordering) Same height, diameter, and mounting as the E3D V6 all-metal HotEnd No machine redesign needed - drops right into your existing setup Compatible with Revo Nozzles swap nozzles at room temperature without tools or hot tightening Anodised black sink and crystal-clear fan mount with fan included Revo HeaterCore included for faster, safer heating

Smaller, lighter, REDDER. Say hello to the Revo Voron – the HotEnd of choice for Voron 3D printers. We’ve developed this Revo-compatible cold side in collaboration with Team Voron. Boost your Voron 3D printer with RapidChange capabilities so you can change nozzles without tools or hot tightening!

Smaller, lighter, REDDER. Say hello to the Revo Voron – the HotEnd of choice for Voron 3D printers. We’ve developed this Revo-compatible cold side in collaboration with Team Voron. Boost your Voron 3D printer with RapidChange capabilities so you can change nozzles without tools or hot tightening!

Revo CR is a drop-in upgrade for some of the most popular Creality 3D printers available, including the Creality CR-10 and Ender 3 series.

Revo CR is a drop-in upgrade for some of the most popular Creality 3D printers available, including the Creality CR-10 and Ender 3 series.

High flow hotend for high temperature and fibre filament printing

Ultra high flow hotend for high temperature and fibre filament printing

Your Raise3D Pro2 is failing on those big PLA prints you bought it for? We have the fix. The Raise3D Pro2 can actually be a very good 3D printer if you use this. Main benefits: Heat creep is minimized by Copperheads thermal performance Better layer bonding from the Bondtech CHT nozzles and higher flow with PLA and other non-abrasive materials Compatible with all RepRap nozzles Easy and quick to install Includes a gauging tool to achieve optimal hotend setup

The V6 is our flagship HotEnd featuring an all-metal design with high-temperature performance. The V6 is an incredibly versatile HotEnd allowing a wide variety of filaments to be used as standard. Whether you’d like to experiment with more advanced materials or print at different resolutions and sizes, our V6 ecosystem is suited for every application. HighlightsAll metal heatbreakMaximum temperature: 300ºCCartridge style heater blockGroove mount

The V6 is our flagship HotEnd featuring an all-metal design with high-temperature performance. The V6 is an incredibly versatile HotEnd allowing a wide variety of filaments to be used as standard. Whether youd like to experiment with more advanced materials or print at different resolutions and sizes, our V6 ecosystem is suited for every application. HighlightsAll metal heatbreakMaximum temperature: 300CCartridge style heater blockGroove mount

The Volcano HotEnd is the solution to slow printing. Boasting 3x the volumetric flow rate of the standard V6, Volcano enables you to print bigger and stronger parts, faster. If you've got a printer with a large build volume then the Volcano HotEnd is a must-have.Highlights:3 x the volumetric flow rate of the V6 HotEndE3D Ecosystem compatibleMaximum printing temperature 300°CAll metal HeatBreak

The Volcano HotEnd is the solution to slow printing. Boasting 3x the volumetric flow rate of the standard V6, Volcano enables you to print bigger and stronger parts, faster. If you've got a printer with a large build volume then the Volcano HotEnd is a must-have.Highlights:3 x the volumetric flow rate of the V6 HotEndE3D Ecosystem compatibleMaximum printing temperature 300°CAll metal HeatBreak

All the best V6 parts carefully curated to make the V6 Gold. More than just its shiny appearance, this HotEnd is built for outstanding performance with all filaments and optimised for high-temperature and abrasive 3D printing.‘Gold’ Heat SinkKey features‘Gold’ anodised Heatsink Maximum printing temperature: 285ºCPlated copper heater block Hardened steel nozzle High precision heater cartridgeGroove mountCapricorn Tubing

All the best V6 parts carefully curated to make the V6 Gold. More than just its shiny appearance, this HotEnd is built for outstanding performance with all filaments and optimised for high-temperature and abrasive 3D printing.‘Gold’ Heat SinkKey features‘Gold’ anodised Heatsink Maximum printing temperature: 285ºCPlated copper heater block Hardened steel nozzle High precision heater cartridgeGroove mountCapricorn Tubing

Multiple mounting options to fit printers including Prusa, Creality and Voron with attachment options for part cooling fan on the side of the frame.Features:New nozzle design to improve heat transfer (M4 thread) and easy one handed nozzle changingHotend with heatsink can be removed fast and easy from frame with only two M2 screwsSmall and quiet 2510 fanSeparate functions of Nozzle and Heatbreak. The nozzle melts the filament and the heatbreak ensures a sharp temperature transition.Ring Heater hotend design with ceramic heater for very fast heat up times (280°C in less than 1 minute)

The V6 is our flagship HotEnd featuring an all-metal design with high-temperature performance. The V6 is an incredibly versatile HotEnd allowing a wide variety of filaments to be used as standard. Whether you’d like to experiment with more advanced materials or print at different resolutions and sizes, our V6 ecosystem is suited for every application. HighlightsAll metal heatbreakMaximum temperature: 300ºCCartridge style heater blockGroove mount

The Volcano HotEnd is the solution to slow printing. Boasting 3x the volumetric flow rate of the standard V6, Volcano enables you to print bigger and stronger parts, faster. If you've got a printer with a large build volume then the Volcano HotEnd is a must-have.Highlights:3 x the volumetric flow rate of the V6 HotEndE3D Ecosystem compatibleMaximum printing temperature 300°CAll metal HeatBreak

The Volcano HotEnd is the solution to slow printing. Boasting 3x the volumetric flow rate of the standard V6, Volcano enables you to print bigger and stronger parts, faster. If you've got a printer with a large build volume then the Volcano HotEnd is a must-have.Highlights:3 x the volumetric flow rate of the V6 HotEndE3D Ecosystem compatibleMaximum printing temperature 300°CAll metal HeatBreak

Revo Six Prusa Edition is a top choice if you want to update your old E3D V6 setup to the latest generation of E3D HotEnd technology. It has the same height, the same filament diameter, and the same groove mount as the E3D V6, so it drops straight into V6-fitted machines without the hassle of redesigning print head mounts and accessories. Just fit it, connect the Revo HeaterCore wires, and youre ready to 3D print. And yes you can still use all the print profiles you have built up on Prusa slicer!HighlightsEasy use Faster and safer heatingNew cool design

These premium HotEnds are an official collaboration between E3D, DiamondBack, and Bambu Lab - bringing you the most extreme HotEnd solution to date. The rapid development of fibre, metal and ceramic filaments has increased the need for abrasion-resistant nozzles. Compared with all the nozzle options on the market, DiamondBacks diamonds deliver unmatched wear-resistance and versatility.

These premium HotEnds are an official collaboration between E3D, DiamondBack, and Bambu Lab - bringing you the most extreme HotEnd solution to date. The rapid development of fibre, metal and ceramic filaments has increased the need for abrasion-resistant nozzles. Compared with all the nozzle options on the market, DiamondBacks diamonds deliver unmatched wear-resistance and versatility.