Spare Parts & Accessories

AESUB blue is a self-vanishing scanning spray developed by scanning experts. The spray evaporates within a few hours, meaning that there is no need for cleaning after scanning.Highlights:Disappearing state-of-the-art scanningsprayNo cleaning requiredThin and homogeneous coatingFree of pigmentsDeveloped and approved by scanning experts

AESUB orange is a long-lasting self-volatilizing scanning spray developed by scanning experts. It eliminates basic application problems of 3D metrology, especially in sensitive areas (laboratories, production, etc.) and protects the equipment from contamination by deposition of pigments.Highlights:Disappearing state-of-the-art scanningsprayLong-lastingNo cleaning requiredThin and homogeneous coatingFree of pigmentsDeveloped and approved by scanning experts

AESUB white is a permanent scanning spray developed by scanning experts. It is the result of consistent further development of permanent scanning sprays. Please Note, This product can only be shipped within Sweden! Highlights:Permanent state-of-the-art scanningsprayFree of titanium dioxide nano particles (TiO2)Thin and homogenous coatingDeveloped and approved by scanning experts

This is Brass Plated Wear Resistant Nozzle for Flashforge Creator Pro 3. The Nozzle is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better than nickel with PTFE co-deposit. The TwinClad XT coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle.Fits:FlashForge Creator 3 ProFlashForge Creator 4FlashForge Guider 3FlashForge Guider 3 Plus

Introducing the GammaMaster Nozzle the newest nozzle technology by Slice Engineering, incorporating cutting-edge developments in metallurgy and surface preparation. Gone are the days of compromising thermal performance while printing with abrasive filaments, as GammaMaster offers the ultimate solution. Engineered specifically for abrasive filament printing, this RepRap nozzle boasts unmatched thermal conductivity without any compromises.

Micro Swiss CM2 Nozzle is an ideal nozzle for all applications. Core of the nozzle is made of high-temperature Copper Chromium Zirconium and plated with an Electroless Nickel Plating. This special alloy retains its strength at much higher temperatures compared to a regular copper alloy. The tip of the nozzle is made of M2 Hardened High Speed Steel and coated with a special nonstick nano coating.

Micro Swiss CM2 Nozzle is an ideal nozzle for all applications. Core of the nozzle is made of high-temperature Copper Chromium Zirconium and plated with an Electroless Nickel Plating. This special alloy retains its strength at much higher temperatures compared to a regular copper alloy. The tip of the nozzle is made of M2 Hardened High Speed Steel and coated with a special nonstick nano coating.

Micro Swiss CM2 Nozzle is an ideal nozzle for all applications. Core of the nozzle is made of high-temperature Copper Chromium Zirconium and plated with an Electroless Nickel Plating. This special alloy retains its strength at much higher temperatures compared to a regular copper alloy. The tip of the nozzle is made of M2 Hardened High Speed Steel and coated with a special nonstick nano coating.

Micro Swiss CM2 Nozzle is an ideal nozzle for all applications. Core of the nozzle is made of high-temperature Copper Chromium Zirconium and plated with an Electroless Nickel Plating. This special alloy retains its strength at much higher temperatures compared to a regular copper alloy. The tip of the nozzle is made of M2 Hardened High Speed Steel and coated with a special nonstick nano coating.

The FlowTech Hotend is a new generation hotend line from Micro Swiss. Its unique design eliminates common hotend issues such as leaking nozzle seal and complex nozzle swaps.HighlightsLeak-Proof NozzleCold Nozzle ChangeHigh-Flow CharacteristicsAll-Metal Design300C Max Temperature

This is a practical turntable with a 360° horizontal rotation design for 3DMakerpro 3D scanners. The turntable creates controlled, clean rotational movements for a quick and efficient scanning process Problems such as incomplete data scans due to manual intervention are prevented.Highlights360° horizontal rotation designFor 3D scanners from 3DMakerproProvides Controlled Image Scan

This is a multi-axis turntable for Seal/Seal Lite 3D scanners from 3DMakerpro that can perform a fully automated scan of objects.Advanced functions such as script editing offer scanning experts a wide range of application options, but beginners can also use the turntable very well.HighlightsCompatible with 3DMakerPro Seal / Seal LiteFully automaticThe tool for beginners & experts

This high quality tripod from 3DMakerpro is compatible with Seal, Seal Lite, Moose, and Moose Lite

With the Smart Grip you can connect your 3DMakerpro 3D scanner to your smartphone to scan objects anywhere you want. The smartphone to be used should be equipped with an OTG function (On-The-Go) and be compatible with non-official OTG cables.Compatible withSealSeal LiteMooseMoose Lite

This is MK10 style nozzle, it is made from a 360 brass base material and plated with TwinClad XT coating.FeaturesFor PTFE lined hotends only