Spare Parts & Accessories

Introducing the GammaMaster Nozzle the newest nozzle technology by Slice Engineering, incorporating cutting-edge developments in metallurgy and surface preparation. Gone are the days of compromising thermal performance while printing with abrasive filaments, as GammaMaster offers the ultimate solution. Engineered specifically for abrasive filament printing, this RepRap nozzle boasts unmatched thermal conductivity without any compromises.

The cutting mat have the perfect amount of stickiness, it's adhesive is strong enough to keep materials in place, but peel off easily without any tears, it retains it's stickiness even after many uses.

The Green Cutting Mat is bigger then our standard size so you can great bigger designs in one cut! It is specifically for standard grip materials like iron-on, vinyl, cardstock, patterned paper, embossed cardstock & etc.

This bundle contains all the needed tools to easily peel away any excess materials of your projects and speed up your workflow.

The scrapers are easy to use and ensures you won't have any bubbles in your design.

Starter Pack for your Mini & Easy Heat Press includes everything you need to get started and let your creativity run free!

Starter Pack for your Auto Heat Press includes everything you need to get started and let your creativity run free!

Starter Pack for your Crafter includes everything you need to get started and let your creativity run free!

Sublimation Mugs - Blank - 325 ml - 6 pack for your LOKLiK Auto Tumbler.

Sublimation Heat Tape that can withstand high temperatures so that your design stays in the same spot while applying heat with our LOKLiK Heat Presses.

Matte Printable Vinyl Sticker Paper A4 - 20 Pack Print your designs with an inkjet printer on our vinyl paper, let it dry for 5-10 minutes, trim your design to the required size and peel and stick!

Elevate your creativity with our highest quality materials, smooth textures, and a spectrum of bright, rich colors that make your projects pop!

Heat Transfer paper sheets 8 pcs - Dark is designed for Dark-colored fabrics. It features fabulous color performance, great durability and stickiness.

Heat Transfer paper sheets 8 pcs - Light is designed for Light-colored fabrics. It features fabulous color performance, great durability and stickiness.

Dual Tip brush pens have 12 different colors, is watercolor based, odorless and non toxic so you can let your creativity run free.

Cutting Blade 45° is suitable for various materials like heat transfer vinyl, adhesive vinyl, cardstock, ect.

Cutting Blade 60 is suitable for various materials like felt, cardstock, ect.

Blade kit that includes a blade housing, a Cutting Blade 45 and a Cutting Blade 60.

Vinyl Roll Holder has 24 compartments to easily store all your material rolls and sheets.

Heat Transfer Vinyl Material Bundle A4 contains 27 different colours and 1 reusable teflon sheet.

Permanent Vinyl Material Bundle contains 29 different colours of Permanent Adhesive Vinyl.

Our Permanent Adhesive Vinyl has a clear PET backing, strong stickiness, great duration, water resistance. This vinyl roll is compatible with our Crafter and it can be applied to any smooth surface.

Upgrade your extruder to a Microswiss direct drive extruder.FeaturesNo modification required, simple plug and playNo printed brackets or sandwiches

Upgrade your extruder to a Microswiss direct drive extruder.FeaturesNo modification required, simple plug and playNo printed brackets or sandwiches

Revised Features New heat break with reinforced throat and revised radiator to prevent damage during installation and repairs New heat sink with wider opening for the filament path to more readily accept multi-material setups like the Prusa MMU or Mosaic Palette. Main Benefits The Mosquito Magnum prints up to 20% faster than any other hotend on the market A thermal insulator protects the extended melt zone from the effects of active cooling, and radiative heat loss. It has a heat transmission rate as low as 3 W/m*K, meaning you can have ultimate confidence in the speed of your print, while at the same time maintaining the high resolution benefits achieved with the standard Mosquito The melt zone is extended proximally upwards to maintain a small form factor A multi extrusion setup with both high flow and high resolution optimized designs can be created without needing to purchase new nozzles or make carriage modifications to accommodate hotends of different sizes Oh yeah, and you can change the nozzle with one hand. Mosquito Magnum is only available for 1.75 mm filament at this time.

This is a drop in All Metal Conversion kit for the CR-6 SE printers. It requires absolutely zero modification to your printer to install. Our uniquely designed cooling block eliminates need for a thermal tube. By not having a separate thermal tube inside the cooling block, it allows for faster heat dissipation.

Micro Swiss Bowden Dual Gear Extruder features the same quality construction as our Direct Drive extruders. It is designed to be a bolt-on replacement to most of the Bowden extruder machines on the market.

This extruder overcomes the shortcomings of all current counterparts on the market, to create an optimal printing experience for everyone.Features:Lightweight3:1 Gear ratioAdaptable to wide range of 3D PrintersHardened steel, precision cut Dual Gear driveIndustry shortest, highly constrained, TwinClad XT plated filament pathBevel Gear system allows a low overhang extruder mountIntegrated with a Micro Swiss All Metal Hotend

This extruder overcomes the shortcomings of all current counterparts on the market, to create an optimal printing experience for everyone.Features:Lightweight3:1 Gear ratioAdaptable to wide range of 3D PrintersHardened steel, precision cut Dual Gear driveIndustry shortest, highly constrained, TwinClad XT plated filament pathBevel Gear system allows a low overhang extruder mountIntegrated with a Micro Swiss All Metal Hotend

This extruder overcomes the shortcomings of all current counterparts on the market, to create an optimal printing experience for everyone.Features:Lightweight3:1 Gear ratioAdaptable to wide range of 3D PrintersHardened steel, precision cut Dual Gear driveIndustry shortest, highly constrained, TwinClad XT plated filament pathBevel Gear system allows a low overhang extruder mountIntegrated with a Micro Swiss All Metal Hotend

This extruder overcomes the shortcomings of all current counterparts on the market, to create an optimal printing experience for everyone.Features:Lightweight3:1 Gear ratioAdaptable to wide range of 3D PrintersHardened steel, precision cut Dual Gear driveIndustry shortest, highly constrained, TwinClad XT plated filament pathBevel Gear system allows a low overhang extruder mountIntegrated with a Micro Swiss All Metal Hotend