Micro Swiss All Metal Hotend Kit for Creality CR-6 SE

I bought this to try to fix the constant extrusion problems I've had with my CR6SE since it arrived, the design of the bowden tube at the hot end on the standard hot end is very poor and I had constant problems with the tube kinking and obstructing the filament flow. It would work for a week or two then require stripping and a new tube fitting. A replacement O/E hot end was no better.

Having replaced with a far better hot end - this one, that problem has been eliminated, but the was still suffering with under extrusion UNTIL I dumped the stock part cooling duct and replaced with one that doesn't blow cold air on the hot end. So far about 24 hours of printing has been great. I needed the all metal hot end to use specialist filaments that consistently need 240 deg C upwards.
The quality of the MicroSwiss Hot End and nozzles is absolutely first class, very pleased.

Micro Swiss is a very good and came highly recommended in the 3D printing communities. Technology outlet was outstanding and delivery was fast. Would definitely recommend this place for anyone.

Made print quality better but keeps clogging and jamming, I've had to fix it 4 times in one week.

Made print quality better but keeps clogging and jamming, I've had to fix it 4 times in one week.

good service from Technology Outlet