Spare Parts & Accessories

Do you have problems with warping when 3D printing? Then MAGIGOO is an easy-to-use 3D printing adhesive designed to solve the problem of first non-sticky layer (warping). This is the most common problem in 3D printing for manufacturing with FFF / FDM technology. Product features of Magigoo adhesive :Pen with adhesive makes your 3D prints stick to the surface easilyReduces warping to a minimumSave time, filament & nervesUse with PLA and ABS based filaments

Do you have problems with warping when 3D printing? Then MAGIGOO is an easy-to-use 3D printing adhesive designed to solve the problem of first non-sticky layer (warping). This is the most common problem in 3D printing for manufacturing with FFF / FDM technology. Product features of Magigoo adhesive :Pen with adhesive makes your 3D prints stick to the surface easilyReduces warping to a minimumSave time, filament & nerves

Do you have problems with warping when 3D printing? Then MAGIGOO is an easy-to-use 3D printing adhesive designed to solve the problem of first non-sticky layer (warping). This is the most common problem in 3D printing for manufacturing with FFF / FDM technology. Product features of Magigoo adhesive :Pen with adhesive makes your 3D prints stick to the surface easilyReduces warping to a minimumSave time, filament & nerves

Do you have problems with warping when 3D printing? Then MAGIGOO is an easy-to-use 3D printing adhesive designed to solve the problem of first non-sticky layer (warping). This is the most common problem in 3D printing for manufacturing with FFF / FDM technology. Product features of Magigoo adhesive :Pen with adhesive makes your 3D prints stick to the surface easilyReduces warping to a minimumSave time, filament & nerves

Do you have problems with warping when 3D printing? Then MAGIGOO is an easy-to-use 3D printing adhesive designed to solve the problem of first non-sticky layer (warping). This is the most common problem in 3D printing for manufacturing with FFF / FDM technology. Product features of Magigoo adhesive :Pen with adhesive makes your 3D prints stick to the surface easilyReduces warping to a minimumSave time, filament & nerves

Do you have problems with warping when 3D printing? Then MAGIGOO is an easy-to-use 3D printing adhesive designed to solve the problem of first non-sticky layer (warping). This is the most common problem in 3D printing for manufacturing with FFF / FDM technology. Product features of Magigoo adhesive :Pen with adhesive makes your 3D prints stick to the surface easilyReduces warping to a minimumSave time, filament & nerves

Do you have problems with warping when 3D printing? Then MAGIGOO is an easy-to-use 3D printing adhesive designed to solve the problem of first non-sticky layer (warping). This is the most common problem in 3D printing for manufacturing with FFF / FDM technology.Product features of Magigoo adhesive :Pen with adhesive makes your 3D prints stick to the surface easilyReduces warping to a minimumSave time, filament & nerves

Do you have problems with warping when 3D printing? Then MAGIGOO is an easy-to-use 3D printing adhesive designed to solve the problem of first non-sticky layer (warping). This is the most common problem in 3D printing for manufacturing with FFF / FDM technology. Product features of Magigoo adhesive :Pen with adhesive makes your 3D prints stick to the surface easilyReduces warping to a minimumSave time, filament & nerves

The nozzle is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better than nickel with PTFE co-deposit. The TwinClad XT coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle.

The nozzle is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better than nickel with PTFE co-deposit. The TwinClad XT coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle.

The nozzle is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better than nickel with PTFE co-deposit. The TwinClad XT coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle.

Micro Swiss CM2 Nozzle is an ideal nozzle for all applications. Core of the nozzle is made of high-temperature Copper Chromium Zirconium and plated with an Electroless Nickel Plating. This special alloy retains its strength at much higher temperatures compared to a regular copper alloy. The tip of the nozzle is made of M2 Hardened High Speed Steel and coated with a special nonstick nano coating.

Micro Swiss CM2 Nozzle is an ideal nozzle for all applications. Core of the nozzle is made of high-temperature Copper Chromium Zirconium and plated with an Electroless Nickel Plating. This special alloy retains its strength at much higher temperatures compared to a regular copper alloy. The tip of the nozzle is made of M2 Hardened High Speed Steel and coated with a special nonstick nano coating.

Micro Swiss CM2 Nozzle is an ideal nozzle for all applications. Core of the nozzle is made of high-temperature Copper Chromium Zirconium and plated with an Electroless Nickel Plating. This special alloy retains its strength at much higher temperatures compared to a regular copper alloy. The tip of the nozzle is made of M2 Hardened High Speed Steel and coated with a special nonstick nano coating.

The FlowTech Hotend is a new generation hotend line from Micro Swiss. Its unique design eliminates common hotend issues such as leaking nozzle seal and complex nozzle swaps. This edition is designed for Creality K1 and Older K1 Max.HighlightsLeak-Proof NozzleCold Nozzle ChangeHigh-Flow CharacteristicsAll-Metal Design300°C Max Temperature

The FlowTech Hotend is a new generation hotend line from Micro Swiss. Its unique design eliminates common hotend issues such as leaking nozzle seal and complex nozzle swaps.HighlightsLeak-Proof NozzleCold Nozzle ChangeHigh-Flow CharacteristicsAll-Metal Design300°C Max Temperature

The FlowTech Hotend is a new generation hotend line from Micro Swiss. Its unique design eliminates common hotend issues such as leaking nozzle seal and complex nozzle swaps.HighlightsLeak-Proof NozzleCold Nozzle ChangeHigh-Flow CharacteristicsAll-Metal Design300°C Max Temperature

The FlowTech Hotend is a new generation hotend line from Micro Swiss. Its unique design eliminates common hotend issues such as leaking nozzle seal and complex nozzle swaps.HighlightsLeak-Proof NozzleCold Nozzle ChangeHigh-Flow CharacteristicsAll-Metal Design300C Max Temperature

This is an all metal hotend upgrade kit for MK10 style extruders.FeaturesFits on many printerseasy to install

This is Micro Swiss MK10 All Metal Hotend ONLY style nozzle.Fits onlyit will ONLY fit our New MK10 All Metal Hotend

This is MK10 style nozzle, it is made from a 360 brass base material and plated with TwinClad XT coating.FeaturesFor PTFE lined hotends only