Accessories

The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-fit nuts are simply embedded into a blind or through hole.

The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-fit nuts are simply embedded into a blind or through hole.

M2 + M3 + M4 + M5 Thread Inserts for your 3D printing parts. The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-in nuts are simply embedded into a blind or through hole.

The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-fit nuts are simply embedded into a blind or through hole.

The deburrer removes the protruding edges on the 3D printing component with little effort. This makes the metal deburrer perfect as a 3D printing tool and should not be missing from any 3D printing accessory kit.

The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-fit nuts are simply embedded into a blind or through hole.

Smaller, lighter, and better than ever before, our Revo Micro HotEnd uses the smallest heatsink we’ve produced so far. Weighing in at only 30g, use Revo Micro to squeeze more speed performance from your motion system. Adaptable to Bowden or direct drive setups, Revo Micro is fully compatible with our Revo ecosystem, so you can easily change nozzles without tools or hot tightening at room temperature, using just your fingers. With an anodised black heatsink, not only does Revo Micro run cool – it looks cool, too. Designed for use with Revo Nozzles Works with a Revo HeaterCore for faster heat-ups Smallest and lightest HotEnd we’ve produced so far Titanium-like performance Ultra-lightweight construction for improved speed performance Compatible with popular 3D printers including Creality, Ender, Prusa, Anet, Biqu, Monoprice and many more

The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-fit nuts are simply embedded into a blind or through hole.

AESUB transparent is a self-vanishing dulling spray developed by scanning experts. It was developed for photogrammetry, Lidar and other colour capturing scanning methods. The spray evaporates within a few hours, meaning that there is no need for cleaning after scanning. Highlights:Transparent vanishing dulling sprayEliminates reflections without loss of color informationPerfrect cor 3D scanning, photo-grammetry, film & photographyThin & homogenous coatingFree of pigmentsNo cleaning required

Revo CR is a drop-in upgrade for some of the most popular Creality 3D printers available, including the Creality CR-10 and Ender 3 series.

Specially designed for threaded inserts To create a perfect drill hole for. To obtain threaded inserts, drills of the appropriate size are required. Conventional drill sets do not accommodate these specific sizes, which is why we have developed drills that produce holes suitable for threaded inserts.

Ruthex soldering tips for ruthex threaded inserts. The ruthex soldering tips can be used even more easily in 3D printing parts from 3D printers such as Anycubic, Creality or Prusa.

The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-fit nuts are simply embedded into a blind or through hole.

The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-fit nuts are simply embedded into a blind or through hole.

Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening – just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print. Compatible with Revo cold sides, including Revo Six, Revo Micro, and Revo Hemera No need to hot tighten – each Revo Nozzle is a factory-assembled nozzle and heatbreak in one Works with a Revo HeaterCore for faster heat-ups and greater efficiency than most HotEnds on the market Compatible with popular FDM 3D printers, such as Creality, Ender, Prusa, Anet, Biqu, Monoprice, and many more

The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-fit nuts are simply embedded into a blind or through hole.

The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-fit nuts are simply embedded into a blind or through hole.

The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-fit nuts are simply embedded into a blind or through hole.

Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening – just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print. Compatible with Revo cold sides, including Revo Six, Revo Micro, and Revo Hemera No need to hot tighten – each Revo Nozzle is a factory-assembled nozzle and heatbreak in one Works with a Revo HeaterCore for faster heat-ups and greater efficiency than most HotEnds on the market Compatible with popular FDM 3D printers, such as Creality, Ender, Prusa, Anet, Biqu, Monoprice, and many more

Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening – just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print. Compatible with Revo cold sides, including Revo Six, Revo Micro, and Revo Hemera No need to hot tighten – each Revo Nozzle is a factory-assembled nozzle and heatbreak in one Works with a Revo HeaterCore for faster heat-ups and greater efficiency than most HotEnds on the market Compatible with popular FDM 3D printers, such as Creality, Ender, Prusa, Anet, Biqu, Monoprice, and many more

Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening – just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print. Compatible with Revo cold sides, including Revo Six, Revo Micro, and Revo Hemera No need to hot tighten – each Revo Nozzle is a factory-assembled nozzle and heatbreak in one Works with a Revo HeaterCore for faster heat-ups and greater efficiency than most HotEnds on the market Compatible with popular FDM 3D printers, such as Creality, Ender, Prusa, Anet, Biqu, Monoprice, and many more

Revo Hemera is a compact, powerful extrusion system with the convenience of E3D’s RapidChange Revo ecosystem. With dual drive gears and hardened steel hobbs to grip filament from both sides, Revo Hemera gives your 3D printer exceptional pushing force. A tightly constrained filament path means material can’t flex and bend on its way to the melt zone, making it a top choice for challenging 3D printing filaments, like flexibles. Compatible with Revo Nozzles so you can change nozzles at room temperature using just your fingers Custom motor end-caps provide convenient T-slots for flat mounting, leaving plenty of room for other accessories, like bed levelling probes or part cooling fans Compatible with many popular 3D printers, including the Creality CR series and Ender series, Prusa, Anet, Biqu, Monoprice, and many more. Check out our 3D printer upgrade guides Everything you need is get started is included in the box – just mount it to your 3D printer and start 3D printing

The ruthex Deburrer is a precision hand tool for cleaning and refining 3D-printed parts — perfect for removing small burrs and imperfections after printing. Highlights: Designed for perfect post-processing of 3D prints Includes 11 high-quality HSS blades with 360° rotation Robust metal handle with integrated blade storage Quick-release system for safe and easy blade changes Comfortable ergonomic grip for precise work Long-lasting blades for various applications Also suitable for resin, wood, and soft metals

The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. VORON, Anycubic, Creality or Prusa using heat. Using heat from a soldering iron, the press-fit nuts are simply embedded into a blind or through hole.