Accessories

The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-fit nuts are simply embedded into a blind or through hole.

The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-fit nuts are simply embedded into a blind or through hole.

The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-fit nuts are simply embedded into a blind or through hole.

M2 + M3 + M4 + M5 Thread Inserts for your 3D printing parts. The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-in nuts are simply embedded into a blind or through hole.

The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-fit nuts are simply embedded into a blind or through hole.

The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-fit nuts are simply embedded into a blind or through hole.

Smaller, lighter, and better than ever before, our Revo Micro HotEnd uses the smallest heatsink we’ve produced so far. Weighing in at only 30g, use Revo Micro to squeeze more speed performance from your motion system. Adaptable to Bowden or direct drive setups, Revo Micro is fully compatible with our Revo ecosystem, so you can easily change nozzles without tools or hot tightening at room temperature, using just your fingers. With an anodised black heatsink, not only does Revo Micro run cool – it looks cool, too. Designed for use with Revo Nozzles Works with a Revo HeaterCore for faster heat-ups Smallest and lightest HotEnd we’ve produced so far Titanium-like performance Ultra-lightweight construction for improved speed performance Compatible with popular 3D printers including Creality, Ender, Prusa, Anet, Biqu, Monoprice and many more

The deburrer removes the protruding edges on the 3D printing component with little effort. This makes the metal deburrer perfect as a 3D printing tool and should not be missing from any 3D printing accessory kit.

The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-fit nuts are simply embedded into a blind or through hole.

Revo CR is a drop-in upgrade for some of the most popular Creality 3D printers available, including the Creality CR-10 and Ender 3 series.

Comes with a Copper Plated Reprap M6 0,4 mm Nozzle.

The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-fit nuts are simply embedded into a blind or through hole.

The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-fit nuts are simply embedded into a blind or through hole.

The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-fit nuts are simply embedded into a blind or through hole.

Ruthex soldering tips for ruthex threaded inserts. The ruthex soldering tips can be used even more easily in 3D printing parts from 3D printers such as Anycubic, Creality or Prusa.

Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening – just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print. Compatible with Revo cold sides, including Revo Six, Revo Micro, and Revo Hemera No need to hot tighten – each Revo Nozzle is a factory-assembled nozzle and heatbreak in one Works with a Revo HeaterCore for faster heat-ups and greater efficiency than most HotEnds on the market Compatible with popular FDM 3D printers, such as Creality, Ender, Prusa, Anet, Biqu, Monoprice, and many more

Specially designed for threaded inserts To create a perfect drill hole for. To obtain threaded inserts, drills of the appropriate size are required. Conventional drill sets do not accommodate these specific sizes, which is why we have developed drills that produce holes suitable for threaded inserts.

The Phaetus Dragon ST HeatBreak Kit is a genuine replacement designed for the Dragon ST hotend. Made from a copper alloy with a nickel plating, it provides excellent thermal conductivity and wear resistance. The heatbreak ensures stable temperature separation between the hot and cold zones, reducing the risk of heat creep and improving print consistency. Perfect for maintaining reliable performance with engineering-grade materials. Key Features Original heatbreak kit for Dragon ST hotend Nickel-plated copper alloy for durability Excellent thermal conductivity Prevents heat creep and improves stability Optimized for engineering-grade filaments Easy to install as a replacement part

The Phaetus Dragonfly HIC HF Integrated Welded Nozzle 0.4 mm is an original hardened-steel nozzle designed specifically for the Dragonfly HIC HF hotend. With its robust one-piece welded M6 construction, it provides optimal heat transfer, sealing and durability—ideal for high-performance, high-flow printing. Key Features Hardened steel, welded one-piece M6 nozzle Precisely 0.4 mm diameter for fine detail Exclusive to Dragonfly HIC HF hotend Superior heat transfer and leak resistance Exceptional wear resistance and longevity Designed for high-speed, high-performance printing

The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. VORON, Anycubic, Creality or Prusa using heat. Using heat from a soldering iron, the press-fit nuts are simply embedded into a blind or through hole.

The Snapmaker Basswood Sheet A250 (5-pack) offers a lightweight, laser-compatible wood material ideal for engraving, cutting, and modeling applications. Each sheet measures 200 x 200 mm with a fine 1.5 mm thickness, providing excellent flexibility and surface uniformity. Made from natural basswood, these sheets deliver a smooth, light-toned finish that ensures clear engraving results and clean cut edges. Key Features Precision-cut basswood sheets for laser use 200 x 200 mm size fits the Snapmaker A250 and similar platforms 1.5 mm thickness supports fine cutting and bending Light, even grain for clean engraving and minimal charring Ideal for models, ornaments, crafts, and artistic projects Supplied in a flat-packed 5-piece set

Smaller, lighter, REDDER. Say hello to the Revo Voron – the HotEnd of choice for Voron 3D printers. We’ve developed this Revo-compatible cold side in collaboration with Team Voron. Boost your Voron 3D printer with RapidChange capabilities so you can change nozzles without tools or hot tightening!

Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening – just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print. Compatible with Revo cold sides, including Revo Six, Revo Micro, and Revo Hemera No need to hot tighten – each Revo Nozzle is a factory-assembled nozzle and heatbreak in one Works with a Revo HeaterCore for faster heat-ups and greater efficiency than most HotEnds on the market Compatible with popular FDM 3D printers, such as Creality, Ender, Prusa, Anet, Biqu, Monoprice, and many more