Spare Parts & Accessories

Revo ObXidian is E3D's latest abrasive resistant Revo Nozzle offering, specifically designed for printing fibre-filled polymers. Unlike other abrasion resistant Nozzles, ObXidian’s copper alloy construction has a similar thermal performance to Brass, making it a true drop-in replacement. Just use the same slicer profiles as for your Brass Nozzles.Key features:Material: Copper/Hardened Steel Assembly with E3DLC™ coating.Input diameter: 1.75mmMaximum temperature: 300°C

ObXidian is E3D's latest abrasive Nozzle offering, specifically designed for printing fibre-filled polymers. Unlike other abrasion resistant Nozzles, ObXidian’s copper alloy construction has a similar thermal performance to Brass, making it a true drop-in replacement. Just use the same slicer profiles as for your Brass Nozzles. Key Features: Material: Copper/Hardened Steel Assembly with E3DLC™ coating. Input diameter: 1.75mm Maximum temperature: 300°C

Designed specifically with belt printing in mind these belt nozzles have a longer reach to enable printing at 45 with Revo HotEnds. Start swapping nozzles in under than 60 seconds without tools or hot tightening. Just use your fingers!

Zodiac by E3D Nozzles are a premium range for those that want superior performance. The Nozzle is designed for printing abrasive materials. Designed for use with Crealitys MK8 Hotends.

Zodiac by E3D Nozzles are a premium range for those that want superior performance. The nozzle is designed for printing abrasive materials and PRO Nozzles can be used at up to 450°C. Designed for use with Crealitys MK8 Hotends.

Zodiac by E3D Nozzles are a premium range for those that want superior performance. The nozzle is designed for printing abrasive materials and is manufactured from hardened tool steel with a special bi-layer coating.

Zodiac by E3D Nozzles are a premium range for those that want superior performance. The nozzle is designed for printing abrasive materials and is manufactured from hardened tool steel with a special bi-layer coating. PRO Nozzles can be used at up to 450°

Zodiac by E3D Nozzles are a premium range for those that want superior performance. The nozzle is designed for printing abrasive materials and are manufactured from hardened tool steel with a special bi-layer coating.

Zodiac by E3D Nozzles are a premium range for those that want superior performance. The nozzle is designed for printing abrasive materials and are manufactured from hardened tool steel with a special bi-layer coating. PRO Nozzles can be used at up to 450°C.

A premium nozzle choice, both CRB and Pro Zodiac nozzles are manufactured from hardened tool steel with a special bi-layer coating. Designed for use with Raise3D Pro3 series, Pro2 series and E2 printers only.

HTX nozzles are high-temperature, abrasion-resistant nozzles. Much like ObXidian, HTX nozzles have a hardened steel tip, copper carrier and copper spreader segment to optimise the transmission of heat to the heatsink. The nozzle is then coated with Chromium Nitride to provide abrasive resistance up to 500°C.

These high-quality 3D printing nozzles are designed specifically for use with Prusas latest extruder – Nextruder. Compatible with Prusas MK4 and XL 3D printers, they feature an all-metal filament guide which means that Nextruders filament path is entirely metal. This helps improve overall printer reliability and enables speedier nozzle changing.Key featuresInput diameter 1.75mmMax temperature 300°CCompatibility Prusa MK4 & XL

Revo HT nozzles are made from a copper nozzle and copper spreader to optimise the transmission of heat. The nozzle is then coated with Chromium Nitride for additional corrosion prevention and non-stick properties for printing up to 500°C.

These high-quality 3D printing nozzles are designed specifically for use with Prusas latest extruder – Nextruder. Compatible with Prusas MK4 and XL 3D printers, they feature an all-metal filament guide which means that Nextruders filament path is entirely metal. This helps improve overall printer reliability and enables speedier nozzle changing.HighlightsInput diameter 1.75mmMax temperature 300°CCompatibility Prusa MK4 & XL

With a wear resistance that is orders of magnitude higher than any other E3D nozzle, ObXidian is really hard. Several orders of magnitude harder than Nozzle X and indeed any other generic hardened steel nozzle. This is achieved by pairing a tool steel insert with the new E3DLC coating. This specially formulated coating also embeds non-stick properties into the Nozzle itself resulting in considerably less plastic build up around the Nozzle.HighlightsCopper/Hardened Steel Assembly with E3DLC coating.Input diameter 1.75mmMaximum temperature 300°CNozzles Sizes 0.4mm, 0.6mm, 0.8mm, 1mm, 1.2mm & 1.4mm

HF HT-A nozzles are high-temperature, high flow, abrasion-resistant nozzles. Much like ObXidian, these nozzles have a hardened steel tip, copper carrier and copper spreader segment to optimise the transmission of heat to the heatsink. The nozzle is then coated with Chromium Nitride to provide abrasive resistance, additional corrosion prevention and non-stick properties for printing up to 500°CHighlightsCopper/Hardened Steel Assembly with Chromium Nitride coatingInput diameter 1.75mmMaximum temperature 500°CNozzles Sizes 0.4mm, 0.6mm, 0.8mm, 1mm, 1.2mm & 1.4mm

Upgrade your Prusa MK3 3D printer with Revo to unlock rapid, tool free nozzle changing. This Coldside kit includes a Revo ready drop-in replacement heatsink plus everything you need to securely mount the new setup to your printer. Pair your Revo heatsink with one of our carefully curated Hotside packs to ensure your printing needs are met, straight out of the box.HighlightsDrop-in replacement for Prusa MK3Continue to use your Prusa Slicer print profiles no changes are requiredTool-free nozzle changes in under 60 seconds

Its time to upgrade your existing V6 setup to unlock rapid, tool free nozzle changing with our latest technology, Revo. This Coldside kit includes a ready drop-in replacement Revo heatsink plus everything you need to securely mount the new setup to your printer. Pair your Revo Six sink with one of our carefully curated Hotside packs to ensure your printing needs are met, straight out of the box.HighlightsDrop in replacement for your existing V6 setupTool-free nozzle changes in under 60 seconds

Upgrade your Prusa Mini 3D printer with Revo to unlock rapid, tool free nozzle changing. This Coldside kit includes a Revo ready drop-in replacement heatsink plus everything you need to securely mount the new setup to your printer, including a 3D printed bracket.Pair your Revo heatsink with one of our carefully curated Hotside packs to ensure your printing needs are met, straight out of the box.HighlightsDrop in replacement for Prusa Mini/+Fully compatible with stock Prusa Mini firmware, no need to PID tune after you upgrade!Reuse your stock Prusa fanTool-free nozzle changes in under 60 seconds

Upgrade your Creality printer (please check compatibility list) with Revo to unlock rapid, tool free nozzle changing. This Coldside kit includes a Revo ready drop-in replacement heatsink plus everything you need to mount the new setup to your Creality printer. Pair with our Creality specific Starter Pack to begin experimenting with the 2 most popular brass nozzles within minutes.HighlightsTool-free nozzle changes in under 60 secondsCompatible with Creality Ender 3, Ender 3s, Ender 3 Pro, Ender v2, Ender 5, Ender 5 Pro, Ender 5 Plus, Ender 6, Ender 2 Pro, CR10, CR10S, CR10 S4, CR10 S5 & CR20 Mini

Upgrade your Voron 3D printer with Revo to unlock rapid, tool-free nozzle changing. Developed in collaboration with the Voron Design Team, this Coldside kit includes a Revo ready drop-in replacement heatsink plus everything you need to rigidly mount the new setup to your Voron printer. Pair your Voron Revo sink with one of our carefully curated Hotside packs to ensure your printing needs are met, straight out of the box.HighlightsCompatible with Voron 1, Voron Trident, Voron Switchwire, Voron 2.4, Voron Legacy, & Voron 0.1Tool-free nozzle changes in under 60 secondsSuper lightweight construction for improved speed performancePairs perfectly with the Voron StealthBurner

Upgrade your Creality Ender 3 S1 with Revo to unlock rapid, tool free nozzle changing. This Coldside kit includes a Revo ready drop-in replacement heatsink plus everything you need to mount the new setup to your Ender 3 S1 printer. Pair with our Creality specific Starter Pack to start experimenting with the 2 most popular brass nozzles within minutes.HighlightsCompatible with Creality 3 S1Includes CR touch spacer and optimized part cooling fan shroudTool-free nozzle changes in under 60 seconds

Hemera XS is a classic E3D Extruder, its custom stepper motor means it can move faster on your 3D printers motion system with less inertia than its predecessor Hemera, reducing print artefacts such as ghosting. Hemera also has a custom mounting system which means a range of accessories can be mounted such as bed levelling probes, expansion boards, and more!

Roto is the extruder that Revo deserves. It carefully balances weight (140g) and force (70N+) to provide the lightest, most power-dense 3D printing extruder on the market

Roto is the extruder that Revo deserves. It carefully balances weight (140g) and force (70N+) to provide the lightest, most power-dense 3D printing extruder on the market. This smarter version of Roto has added filament monitoring, an action button, fan speed monitoring and heatsink temperature monitoring to your arsenal. With all these features, you can implement peace of mind within your workflow with remote monitoring and quick, simple maintenance for the most hands-off 3D printing experience ever.

Revo LGX is a world-class extrusion system, thanks to the powerful combination of Revo Micro and Bondtechs LGX extruder. Revo Micro ensures smooth and consistent filament flow, resulting in high-quality prints with every use. Its lightweight and compact design provides excellent thermal performance, reducing heat-up times and preventing heat creep, even during prolonged printing sessions.

With this auto frequency calibrator, the Pro3 Series printer will be able to measure its own frequency and adjust the parameters by itself. With Pro3 Series’ robust construction and stable design, the printer can keep its own frequency for months without shifting. It is recommended that the calibration process be carried out every 2-3 months.  A manual calibration process is also included.

Smaller, lighter, and better than ever before, our Revo Micro HotEnd uses the smallest heatsink we’ve produced so far. Weighing in at only 30g, use Revo Micro to squeeze more speed performance from your motion system. Adaptable to Bowden or direct drive setups, Revo Micro is fully compatible with our Revo ecosystem, so you can easily change nozzles without tools or hot tightening at room temperature, using just your fingers. With an anodised black heatsink, not only does Revo Micro run cool – it looks cool, too. Designed for use with Revo Nozzles Works with a Revo HeaterCore for faster heat-ups Smallest and lightest HotEnd we’ve produced so far Titanium-like performance Ultra-lightweight construction for improved speed performance Compatible with popular 3D printers including Creality, Ender, Prusa, Anet, Biqu, Monoprice and many more

Smaller, lighter, and better than ever before, our Revo Micro HotEnd uses the smallest heatsink we’ve produced so far. Weighing in at only 30g, use Revo Micro to squeeze more speed performance from your motion system. Adaptable to Bowden or direct drive setups, Revo Micro is fully compatible with our Revo ecosystem, so you can easily change nozzles without tools or hot tightening at room temperature, using just your fingers. With an anodised black heatsink, not only does Revo Micro run cool – it looks cool, too. Designed for use with Revo Nozzles Works with a Revo HeaterCore for faster heat-ups Smallest and lightest HotEnd we’ve produced so far Titanium-like performance Ultra-lightweight construction for improved speed performance Compatible with popular 3D printers including Creality, Ender, Prusa, Anet, Biqu, Monoprice and many more

Smaller, lighter, and better than ever before, our Revo Micro HotEnd uses the smallest heatsink weve produced so far. Weighing in at only 30g, use Revo Micro to squeeze more speed performance from your motion system. Adaptable to Bowden or direct drive setups, Revo Micro is fully compatible with our Revo ecosystem, so you can easily change nozzles without tools or hot tightening at room temperature, using just your fingers. With an anodised black heatsink, not only does Revo Micro run cool it looks cool, too. Designed for use with Revo Nozzles Works with a Revo HeaterCore for faster heat-ups Smallest and lightest HotEnd weve produced so far Titanium-like performance Ultra-lightweight construction for improved speed performance Compatible with popular 3D printers including Creality, Ender, Prusa, Anet, Biqu, Monoprice and many more

Revo Six is a drop-in replacement for your E3D V6 HotEnd, giving you all the benefits of E3D’s RapidChange Revo ecosystem in an easy-to-upgrade package. Compatible with Prusa MK2/3 (Check voltage before ordering) Same height, diameter, and mounting as the E3D V6 all-metal HotEnd No machine redesign needed - drops right into your existing setup Compatible with Revo Nozzles – swap nozzles at room temperature without tools or hot tightening Anodised black sink and crystal-clear fan mount with fan included Revo HeaterCore included for faster, safer heating