Spare Parts & Accessories

Master All Materials * Excel With Flexibles The LGX Shortcut Mosquito Printhead is a special unit that includes the LGX Large Gears eXtruder and the LGX Shortcut short filament path hotend based on Copperhead, that will master all materials and excel with the soft and flexible.

This is a LGX Shortcut Upgrade Kit to use on Prusa MK3S and MK3S+. It uses a short Mosquito hotend from Slice Engineering with a Bondtech heatsink. Requires a X-carriage You may download the x-carriage model, change it and/or print it yourself. Or validate the checkbox below to add it to your cart.

This is a LGX Shortcut Upgrade Kit to use on Prusa MK3S and MK3S+. It uses a short Copperhead hotend from Slice Engineering with a Bondtech heatsink. Requires a X-carriage You may download the x-carriage model, change it and/or print it yourself. Or validate the checkbox below to add it to your cart.

Upgrade kit based on the LGX Lite to use on the Voron V0.1 The Mini After LGX Lite plastic parts are made of grey Polyamide (PA12) with no dyeing featuring a wax protective coating. A hotend/fan adapter is required to use this kit. We have a mount available for Klicky users.

Designed for rigid and flexible materials… … and improved cooling capacity. Main Advantages: Is easier to cool down and to install Allows higher Volumetric Flow Rate Supports rigid, flexible and soft materials Prints flexible and soft materials faster It is small and light This LGX printhead only supports 1.75 mm size filament. No heater or thermistor is included.

Designed for rigid and flexible materials and improved cooling capacity. Main Advantages: Is easier to cool down and to install Allows higher Volumetric Flow Rate Supports rigid, flexible and soft materials Prints flexible and soft materials faster It is small and light yet robust Allows one hand nozzle change. This LGX printhead only supports 1.75 mm size filament. No heater or thermistor is included.

Designed for rigid and flexible materials… … and improved cooling capacity. Main Advantages: Enables Industrial level Volumetric Flow Rates Supports rigid, flexible and soft materials Prints flexible and soft materials faster Easy to cool down and to install Forms a robust high-flow printhead Allows for one-hand nozzle change This LGX printhead only supports 1.75 mm size filament. No heater or thermistor is included.

Upgrade kit compatible with LGX Lite only to use on: Creality CR-6 SE CR-6 Max CR-10 Smart The LGX Lite Arrow for Creality plastic parts are made of grey Polyamide (PA12) with no dyeing featuring a wax protective coating. Extruder not included. A LGX Lite extruder is required to use this kit.

Mount a Slice hotend on your Creality CR-6 SE, CR-6 Max or CR-10 Smart 3D printer. Compatible with the LGX Lite Arrow for Creality Plastic adapter made of grey Polyamide (PA12) with no dyeing featuring a wax protective coating. Hotend not included. A Slice Engineering hotend is required to use this set. Copperhead (screw mount only) Mosquito Mosquito Magnum Mosquito Magnum+ 1.75mm Air

Your Raise3D Pro2 is failing on those big PLA prints you bought it for? We have the fix. The Raise3D Pro2 can actually be a very good 3D printer if you use this. Main benefits: Heat creep is minimized by Copperheads thermal performance Better layer bonding from the Bondtech CHT nozzles and higher flow with PLA and other non-abrasive materials Compatible with all RepRap nozzles Easy and quick to install Includes a gauging tool to achieve optimal hotend setup

Wet 3D printing filament can result in stringing, clogging, poor adhesion, and layer shifting. The Creality Spcae Pi Filament Dryer Plus solves these issues by drying the filament during the printing process itself, enhancing your 3D model quality and minimizing the influence of external environmental factors on the printing of 3D filaments. Highlights Two rolls capacity, double drying Adjustable temperature 45-70 Real-time humidity&temperature monitoring Drying time setting 0-48h 360° hot-air heating One-key set for 12 filaments