Spare Parts & Accessories

Upgrade kit based on the LGX Lite to use on the Voron V0.1 The Mini After LGX Lite plastic parts are made of grey Polyamide (PA12) with no dyeing featuring a wax protective coating. A hotend/fan adapter is required to use this kit. We have a mount available for Klicky users.

Designed for rigid and flexible materials… … and improved cooling capacity. Main Advantages: Is easier to cool down and to install Allows higher Volumetric Flow Rate Supports rigid, flexible and soft materials Prints flexible and soft materials faster It is small and light This LGX printhead only supports 1.75 mm size filament. No heater or thermistor is included.

Designed for rigid and flexible materials and improved cooling capacity. Main Advantages: Is easier to cool down and to install Allows higher Volumetric Flow Rate Supports rigid, flexible and soft materials Prints flexible and soft materials faster It is small and light yet robust Allows one hand nozzle change. This LGX printhead only supports 1.75 mm size filament. No heater or thermistor is included.

Designed for rigid and flexible materials… … and improved cooling capacity. Main Advantages: Enables Industrial level Volumetric Flow Rates Supports rigid, flexible and soft materials Prints flexible and soft materials faster Easy to cool down and to install Forms a robust high-flow printhead Allows for one-hand nozzle change This LGX printhead only supports 1.75 mm size filament. No heater or thermistor is included.

Smaller, lighter, and better than ever before, our Revo Micro HotEnd uses the smallest heatsink we’ve produced so far. Weighing in at only 30g, use Revo Micro to squeeze more speed performance from your motion system. Adaptable to Bowden or direct drive setups, Revo Micro is fully compatible with our Revo ecosystem, so you can easily change nozzles without tools or hot tightening at room temperature, using just your fingers. With an anodised black heatsink, not only does Revo Micro run cool – it looks cool, too. Designed for use with Revo Nozzles Works with a Revo HeaterCore for faster heat-ups Smallest and lightest HotEnd we’ve produced so far Titanium-like performance Ultra-lightweight construction for improved speed performance Compatible with popular 3D printers including Creality, Ender, Prusa, Anet, Biqu, Monoprice and many more

Smaller, lighter, and better than ever before, our Revo Micro HotEnd uses the smallest heatsink we’ve produced so far. Weighing in at only 30g, use Revo Micro to squeeze more speed performance from your motion system. Adaptable to Bowden or direct drive setups, Revo Micro is fully compatible with our Revo ecosystem, so you can easily change nozzles without tools or hot tightening at room temperature, using just your fingers. With an anodised black heatsink, not only does Revo Micro run cool – it looks cool, too. Designed for use with Revo Nozzles Works with a Revo HeaterCore for faster heat-ups Smallest and lightest HotEnd we’ve produced so far Titanium-like performance Ultra-lightweight construction for improved speed performance Compatible with popular 3D printers including Creality, Ender, Prusa, Anet, Biqu, Monoprice and many more

Smaller, lighter, and better than ever before, our Revo Micro HotEnd uses the smallest heatsink weve produced so far. Weighing in at only 30g, use Revo Micro to squeeze more speed performance from your motion system. Adaptable to Bowden or direct drive setups, Revo Micro is fully compatible with our Revo ecosystem, so you can easily change nozzles without tools or hot tightening at room temperature, using just your fingers. With an anodised black heatsink, not only does Revo Micro run cool it looks cool, too. Designed for use with Revo Nozzles Works with a Revo HeaterCore for faster heat-ups Smallest and lightest HotEnd weve produced so far Titanium-like performance Ultra-lightweight construction for improved speed performance Compatible with popular 3D printers including Creality, Ender, Prusa, Anet, Biqu, Monoprice and many more

Revo Six is a drop-in replacement for your E3D V6 HotEnd, giving you all the benefits of E3D’s RapidChange Revo ecosystem in an easy-to-upgrade package. Compatible with Prusa MK2/3 (Check voltage before ordering) Same height, diameter, and mounting as the E3D V6 all-metal HotEnd No machine redesign needed - drops right into your existing setup Compatible with Revo Nozzles – swap nozzles at room temperature without tools or hot tightening Anodised black sink and crystal-clear fan mount with fan included Revo HeaterCore included for faster, safer heating

Revo Six is a drop-in replacement for your E3D V6 HotEnd, giving you all the benefits of E3D’s RapidChange Revo ecosystem in an easy-to-upgrade package. Compatible with Prusa MK2/3 (Check voltage before ordering) Same height, diameter, and mounting as the E3D V6 all-metal HotEnd No machine redesign needed - drops right into your existing setup Compatible with Revo Nozzles – swap nozzles at room temperature without tools or hot tightening Anodised black sink and crystal-clear fan mount with fan included Revo HeaterCore included for faster, safer heating

Revo Six is a drop-in replacement for your E3D V6 HotEnd, giving you all the benefits of E3Ds RapidChange Revo ecosystem in an easy-to-upgrade package. Compatible with Prusa MK2/3 (Check voltage before ordering) Same height, diameter, and mounting as the E3D V6 all-metal HotEnd No machine redesign needed - drops right into your existing setup Compatible with Revo Nozzles swap nozzles at room temperature without tools or hot tightening Anodised black sink and crystal-clear fan mount with fan included Revo HeaterCore included for faster, safer heating

Smaller, lighter, REDDER. Say hello to the Revo Voron – the HotEnd of choice for Voron 3D printers. We’ve developed this Revo-compatible cold side in collaboration with Team Voron. Boost your Voron 3D printer with RapidChange capabilities so you can change nozzles without tools or hot tightening!

Smaller, lighter, REDDER. Say hello to the Revo Voron – the HotEnd of choice for Voron 3D printers. We’ve developed this Revo-compatible cold side in collaboration with Team Voron. Boost your Voron 3D printer with RapidChange capabilities so you can change nozzles without tools or hot tightening!

Revo CR is a drop-in upgrade for some of the most popular Creality 3D printers available, including the Creality CR-10 and Ender 3 series.

Revo CR is a drop-in upgrade for some of the most popular Creality 3D printers available, including the Creality CR-10 and Ender 3 series.

Revo Hemera is a compact, powerful extrusion system with the convenience of E3Ds RapidChange Revo ecosystem. With dual drive gears and hardened steel hobbs to grip filament from both sides, Revo Hemera gives your 3D printer exceptional pushing force. A tightly constrained filament path means material cant flex and bend on its way to the melt zone, making it a top choice for challenging 3D printing filaments, like flexibles. Compatible with Revo Nozzles so you can change nozzles at room temperature using just your fingers Custom motor end-caps provide convenient T-slots for flat mounting, leaving plenty of room for other accessories, like bed levelling probes or part cooling fans Compatible with many popular 3D printers, including the Creality CR series and Ender series, Prusa, Anet, Biqu, Monoprice, and many more. Check out our 3D printer upgrade guides Everything you need is get started is included in the box just mount it to your 3D printer and start 3D printing

Revo Hemera is a compact, powerful extrusion system with the convenience of E3D’s RapidChange Revo ecosystem. With dual drive gears and hardened steel hobbs to grip filament from both sides, Revo Hemera gives your 3D printer exceptional pushing force. A tightly constrained filament path means material can’t flex and bend on its way to the melt zone, making it a top choice for challenging 3D printing filaments, like flexibles. Compatible with Revo Nozzles so you can change nozzles at room temperature using just your fingers Custom motor end-caps provide convenient T-slots for flat mounting, leaving plenty of room for other accessories, like bed levelling probes or part cooling fans Compatible with many popular 3D printers, including the Creality CR series and Ender series, Prusa, Anet, Biqu, Monoprice, and many more. Check out our 3D printer upgrade guides Everything you need is get started is included in the box – just mount it to your 3D printer and start 3D printing

Revo Hemera XS is a compact dual-drive extrusion system. It’s 92g lighter and 11mm shorter than classic Hemera, so it can move faster on your 3D printer’s motion system with less inertia, reducing print artefacts such as ghosting. A specially designed heatsink makes it compatible with Revo Nozzles, and with the addition of a Hemera HeatBreak (sold separately) it works with the E3D V6 ecosystem, too.

Revo Hemera XS is a compact dual-drive extrusion system. It’s 92g lighter and 11mm shorter than classic Hemera, so it can move faster on your 3D printer’s motion system with less inertia, reducing print artefacts such as ghosting. A specially designed heatsink makes it compatible with Revo Nozzles, and with the addition of a Hemera HeatBreak (sold separately) it works with the E3D V6 ecosystem, too.

High flow hotend for high temperature and fibre filament printing

Ultra high flow hotend for high temperature and fibre filament printing

Upgrade kit compatible with LGX Lite only to use on: Creality CR-6 SE CR-6 Max CR-10 Smart The LGX Lite Arrow for Creality plastic parts are made of grey Polyamide (PA12) with no dyeing featuring a wax protective coating. Extruder not included. A LGX Lite extruder is required to use this kit.

Mount a Slice hotend on your Creality CR-6 SE, CR-6 Max or CR-10 Smart 3D printer. Compatible with the LGX Lite Arrow for Creality Plastic adapter made of grey Polyamide (PA12) with no dyeing featuring a wax protective coating. Hotend not included. A Slice Engineering hotend is required to use this set. Copperhead (screw mount only) Mosquito Mosquito Magnum Mosquito Magnum+ 1.75mm Air

Your Raise3D Pro2 is failing on those big PLA prints you bought it for? We have the fix. The Raise3D Pro2 can actually be a very good 3D printer if you use this. Main benefits: Heat creep is minimized by Copperheads thermal performance Better layer bonding from the Bondtech CHT nozzles and higher flow with PLA and other non-abrasive materials Compatible with all RepRap nozzles Easy and quick to install Includes a gauging tool to achieve optimal hotend setup

The V6 is our flagship HotEnd featuring an all-metal design with high-temperature performance. The V6 is an incredibly versatile HotEnd allowing a wide variety of filaments to be used as standard. Whether you’d like to experiment with more advanced materials or print at different resolutions and sizes, our V6 ecosystem is suited for every application. HighlightsAll metal heatbreakMaximum temperature: 300ºCCartridge style heater blockGroove mount

The V6 is our flagship HotEnd featuring an all-metal design with high-temperature performance. The V6 is an incredibly versatile HotEnd allowing a wide variety of filaments to be used as standard. Whether youd like to experiment with more advanced materials or print at different resolutions and sizes, our V6 ecosystem is suited for every application. HighlightsAll metal heatbreakMaximum temperature: 300CCartridge style heater blockGroove mount

The Volcano HotEnd is the solution to slow printing. Boasting 3x the volumetric flow rate of the standard V6, Volcano enables you to print bigger and stronger parts, faster. If you've got a printer with a large build volume then the Volcano HotEnd is a must-have.Highlights:3 x the volumetric flow rate of the V6 HotEndE3D Ecosystem compatibleMaximum printing temperature 300°CAll metal HeatBreak

The Volcano HotEnd is the solution to slow printing. Boasting 3x the volumetric flow rate of the standard V6, Volcano enables you to print bigger and stronger parts, faster. If you've got a printer with a large build volume then the Volcano HotEnd is a must-have.Highlights:3 x the volumetric flow rate of the V6 HotEndE3D Ecosystem compatibleMaximum printing temperature 300°CAll metal HeatBreak

All the best V6 parts carefully curated to make the V6 Gold. More than just its shiny appearance, this HotEnd is built for outstanding performance with all filaments and optimised for high-temperature and abrasive 3D printing.‘Gold’ Heat SinkKey features‘Gold’ anodised Heatsink Maximum printing temperature: 285ºCPlated copper heater block Hardened steel nozzle High precision heater cartridgeGroove mountCapricorn Tubing

All the best V6 parts carefully curated to make the V6 Gold. More than just its shiny appearance, this HotEnd is built for outstanding performance with all filaments and optimised for high-temperature and abrasive 3D printing.‘Gold’ Heat SinkKey features‘Gold’ anodised Heatsink Maximum printing temperature: 285ºCPlated copper heater block Hardened steel nozzle High precision heater cartridgeGroove mountCapricorn Tubing

The V6 is our flagship HotEnd featuring an all-metal design with high-temperature performance. The V6 is an incredibly versatile HotEnd allowing a wide variety of filaments to be used as standard. Whether you’d like to experiment with more advanced materials or print at different resolutions and sizes, our V6 ecosystem is suited for every application. HighlightsAll metal heatbreakMaximum temperature: 300ºCCartridge style heater blockGroove mount