Taulman Nylon 230
TAULMANEAN :
Mfg Part No : >
Nylon 230 is the first nylon filament to be processed at 230°C or less. This is a lower temperature than any other nylon filament for your FFF/FDM-3D printer. With the release of Nylon 230 from Taulman3D, you can now process nylon on your low temperature PLA or ABS 3D printer. Add high-strength nylon to your list of processable materials. In addition, Nylon 230 adheres to BlueTape (painter's adhesive tape) and even better to "buildTak" type surfaces and various PVA glues / glue sticks.
Features
Supplies
PrimaCreator
Elevate your 3D printing experience with the revamped PrimaFIX adhesive. Tailored for those passionate about perfect prints, our adhesive now comes in a sleek, redesigned bottle packed with enhanced features. Discover printing like never before!
-
Smaller nipper that is perfect to cut of the filament with.Product features Small and handy nipperEasy to cut filament or fine overhangsCut cables
Description
Taulman Nylon 230
Nylon 230 is the first nylon filament to be processed at 230°C or less. This is a lower temperature than any other nylon filament for your FFF/FDM-3D printer. With the release of Nylon 230 from Taulman3D, you can now process nylon on your low temperature PLA or ABS 3D printer. Add high-strength nylon to your list of processable materials. In addition, Nylon 230 adheres to BlueTape (painter's adhesive tape) and even better to "buildTak" type surfaces and various PVA glues / glue sticks.
Material properties:
- 3D print at 230 ° C
- Nylon 230 adheres to BlueTape
- Uses built-in for best adhesion
- Adheres to PVA glues / glue sticks
Buy Taulman Nylon 230 if you are looking for a strong and reliable filament for your FFF / FDM-3D printer.
Technical Data
| Basic Data | |
| Filament Typ | PA |
| Diameter | 1,75 mm |
| Tolerance | 0,05 mm |
| Weight | 0,45 kg |
| Lenght | 148 m |
| Color | clear transparent |
| Color | clear |
| Printing Parameter | |
| Recomended Printing Temp Min | 228 ºC |
| Recomended Printing Temp Max | 235 ºC |
| Recomended Printbed Temperature Max | 55 ºC |
| Recomended Retraction Min | 3 mm |
| Recomended Retraction Max | 4 mm |
| General | |
| Specific gravity | 1,263 |
| Tensile | |
| Tensile strength | 34 MPa |
| Elongation | |
| Elongation at yield | 417 % |
| Flexural | |
| Flexural Modulus | 73 |
Reviews
Are you sure you would like to remove this item from the shopping cart?
This item is a part of the approved quote. Removing it will remove all quote items from the cart.