Filament & Resin

These retention springs clip onto your Revo HeaterCore on one side, before connecting to any Revo-compatible cold side on the other – including the Revo Micro, Revo Six, and Revo Hemera. The spring keeps the HeaterCore firmly attached to the cold side, while pushing it into the nozzle for improved thermal conductivity.

Creator 4 is a multi-functional, flexible and high-performance commercial 3D printer. It is equipped with three types of extruders, therefore various printing needs can be met by selecting the matching printing module according to different types of filaments. This version is with the extruder – HS option that can print up to 360°C with Carbon Fiber Composite materials.HighlightsLarge build area of 400mm x 350mm x 500mmIndependent Dual ExtruderHeated build chamber, 65°CPrint up to temperatures of 360°CHeated build plate – 120°CSmart filament management systemHEPA 13 air filterBuilt-in-cameraResume print after power loss

Steel Nozzle for Flashforge Creator 3 Pro and Creator 4

Steel Nozzle for Flashforge Creator 3 Pro and Creator 4

Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening – just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print. Compatible with Revo cold sides, including Revo Six, Revo Micro, and Revo Hemera No need to hot tighten – each Revo Nozzle is a factory-assembled nozzle and heatbreak in one Works with a Revo HeaterCore for faster heat-ups and greater efficiency than most HotEnds on the market Compatible with popular FDM 3D printers, such as Creality, Ender, Prusa, Anet, Biqu, Monoprice, and many more

Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening – just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print. Compatible with Revo cold sides, including Revo Six, Revo Micro, and Revo Hemera No need to hot tighten – each Revo Nozzle is a factory-assembled nozzle and heatbreak in one Works with a Revo HeaterCore for faster heat-ups and greater efficiency than most HotEnds on the market Compatible with popular FDM 3D printers, such as Creality, Ender, Prusa, Anet, Biqu, Monoprice, and many more

Swap your 3D printers nozzles in less than 60 seconds without tools or hot tightening just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and youre ready to 3D print. Compatible with Revo cold sides, including Revo Six, Revo Micro, and Revo Hemera No need to hot tighten each Revo Nozzle is a factory-assembled nozzle and heatbreak in one Works with a Revo HeaterCore for faster heat-ups and greater efficiency than most HotEnds on the market Compatible with popular FDM 3D printers, such as Creality, Ender, Prusa, Anet, Biqu, Monoprice, and many more

Swap your 3D printers nozzles in less than 60 seconds without tools or hot tightening just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and youre ready to 3D print. Compatible with Revo cold sides, including Revo Six, Revo Micro, and Revo Hemera No need to hot tighten each Revo Nozzle is a factory-assembled nozzle and heatbreak in one Works with a Revo HeaterCore for faster heat-ups and greater efficiency than most HotEnds on the market Compatible with popular FDM 3D printers, such as Creality, Ender, Prusa, Anet, Biqu, Monoprice, and many more

Steel Nozzle for Flashforge Creator 3 Pro and Creator 4

Hardened Nozzle for Flashforge Creator 3 Pro and Creator 4

Hardened Nozzle for Flashforge Creator 3 Pro and Creator 4

Revo ObXidian is E3D's latest abrasive resistant Revo Nozzle offering, specifically designed for printing fibre-filled polymers. Unlike other abrasion resistant Nozzles, ObXidians copper alloy construction has a similar thermal performance to Brass, making it a true drop-in replacement. Just use the same slicer profiles as for your Brass Nozzles.Key Features:Material: Copper/Hardened Steel Assembly with E3DLC coating.Input diameter: 1.75mmMaximum temperature: 300CNozzles Sizes: 0.25mm, 0.4mm, 0.6mm & 0.8mm

Snapmaker's PVA is a water-soluble carrier material with an extra-smooth surface. Because PVA dissolves in ordinary tap water, it can be used as an excellent support structure carrier when printing highly complex geometries or hollow designs.Highlights:Offers full design and positioning freedomUltra-smooth surface finishDissolves in regular tap water