Copymaster PLA - 1.75mm -1 kg - Ivory
COPYMASTER3DEAN : 5060848213326
Mfg Part No : >PRE-1KG-IVO
PLA from Copymaster3D is a high-quality filament that can be used in many applications when it comes to 3d-printing. We also offer Copymaster3D in a wide range of colors so you can be sure of finding your personal favorite. PLA is based on polylactic acid and is fully biodegradable and emits no toxic fumes.
HighlightsOut of Stock
Supplies
-
Smaller nipper that is perfect to cut of the filament with.Product features Small and handy nipperEasy to cut filament or fine overhangsCut cables
PrimaCreator
Elevate your 3D printing experience with the revamped PrimaFIX adhesive. Tailored for those passionate about perfect prints, our adhesive now comes in a sleek, redesigned bottle packed with enhanced features. Discover printing like never before!
Description
PLA from Copymaster3D is a high-quality filament that can be used in many applications when it comes to 3d-printing. We also offer Copymaster3D in a wide range of colors so you can be sure of finding your personal favorite. PLA is based on polylactic acid and is fully biodegradable and emits no toxic fumes. This means that you dont have to worry about using the filament indoors with children or pets nearby. Copymaster3D PLA also has the benefit of very low shrinkage, this means that you will have very accurate prints, but also that the risk of warping is very low. Even though a heated build platform isnt required we do recommend it as you will get the best adhesion. To be extra sure that the print sticks well to the build plate we recommend that you use PrimaFIX. It will make the prints stick better but will also make it much easier to remove the print from the build surface once it cools off. If you use the heated bed we recommend a temperature between 30-60C
Technical Data
| Basic Data | |
| Filament Typ | PLA |
| Diameter | 1,75 mm |
| Tolerance | 0,05 mm |
| Weight | 1,00 kg |
| Length | 335 m |
| Color | Light ivory Ivory - RAL 1015 |
| Color | Ivory |
| Printing Parameter | |
| Recomended Printing Temp Min | 190 C |
| Recomended Printing Temp Max | 220 C |
| Recomended Printbed Temperature Min | 0 C |
| Recomended Printbed Temperature Max | 45 C |
| Recomended Printing Speed Min | 40 mm/s |
| Recommended Printing Speed Max | 150 mm/s |
| Recomended Fan Speed Min | 60 % |
| Recomended Fan Speed Max | 100 % |
| General | |
| Specific Gravity | 1,24 g/cm3ASTM D792 |
| Temperature | |
| Heat Deflection Temp | 50 C |
| Tensile | |
| Tensile Strength | 45 MPa |
| Elongation | |
| Elongation at yield | 5,3 %ASTM D638 |
| Elongation at Break | 13,3 %ASTM D638 |
| Flexural | |
| Flexural Strength | 63,64 MPaISO 178 |
| Flexural Modulus | 2157 MPaISO 178 |
| Other | |
| Impact Strength | 17 KJ/m2ISO 179 |
| Filament spool selection | |
 |  |
| 1. CopyMaster | |
| Ds | 201 mm |
| ds | 53 mm |
| Ws | 66 mm |
| Emty Spool Weight | 0,217 kg |
| Material of Spool | PS |
| Empty Box Weight | 1 kg |
Reviews
Are you sure you would like to remove this item from the shopping cart?
This item is a part of the approved quote. Removing it will remove all quote items from the cart.