Bambu Lab A1 Mini - Broken Seal

BAMBU LAB
SKU : JB0367

EAN : JB036700A

Mfg Part No : >

The Bambu Lab A1 Mini 3D Printer is a game-changer in FDM 3D printing, redefining flow control. It utilizes a high-resolution, high-frequency eddy current sensor to precisely measure nozzle pressure. The A1 mini comes to you pre-assembled, pre-squared, and pre-tuned with precision. It only takes about 20 minutes to set up for your first print.

Highlights
  • Plug-N-Play Convenience
  • Active Flow Rate Compensation
  • Full Auto Calibration
  • Print Silently
  • High-Speed Precision
  • Active Flow Rate Compensation
  • 180 x 180 x 180 mm Maximum Build Volume
Incl. VAT excl. Delivery

Out of Stock

Description

Bambu Lab A1 Mini

The Bambu Lab A1 Mini 3D Printer is a game-changer in FDM 3D printing, redefining flow control. It utilizes a high-resolution, high-frequency eddy current sensor to precisely measure nozzle pressure. The cutting-edge algorithm dynamically adjusts the flow rate based on sensor data, ensuring unrivaled printing accuracy.

Plug-N-Play

The A1 mini comes to you pre-assembled, pre-squared, and pre-tuned with precision. It only takes about 20 minutes to set up for your first print.

Full-Auto Calibration

A1 mini handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance and nozzle pressure for EVERY print job, automatically.

Auto Z-Offset

A1 mini probes the bed with the nozzle to measure the absolute z-offset. No need to stick a paper as reference.

Auto Vibration Calibration

A1 mini has sensors in toolhead and heatbed. One of the very first bed-slinger printers to run auto resonance calibration on both X & Y axes.

Auto Flow Dynamics

First of its kind, A1 mini runs the nozzle pressure based flow dynamics calibration algorithm. No need to draw any pattern or get any manual pick & match involved, A1 mini handles Pressure Advanced calibration automatically.

Auto Belt Tension

A1 mini can check the belt tension automatically through the vibration frequency calibration. If the belt is loose, the HMS system will notify you to use the auto belt tensioner to set the belt to the right tension.

Print Smooth At Every Corner, Always

The A1 mini revolutionizes flow control in 3D printing. It utilizes a high-resolution, high-frequency eddy current sensor to measure the pressure in the nozzle. Our algorithm actively compensates the flow rate according to the readings to extrude with accuracy.

High-speed Precision

Full-metal Rails, Rigid frame, nozzle pressure sensor, accelerometers, powerful MCU, and above all, an advanced motion control system that utilizes these features to print a 14-minute benchy with quality and following all the speed benchy rules straight out of the box without using specialized filaments.

Print Silently

Active Motor Noise Canceling and Silent Mode can bring down the noise level to under 48 dB, making A1 mini one of the quietest 3D printers on the market, so you can take a nap while your printer is working hard.

Quick Swap Nozzles

All-new quick swap hotend design, the hotend pops in and out with just 1 clip.

What's in the box

Technical Data
Construction an Technical Details 
Compatible Filament Diameter 1.75 mm
Max Nozzle Temperature 300 ºC
Open Filament SystemYes
Recommended Max Printing Speed500 mm/s (depends on material)
Build Volume180 mm x 180 mm x 180 mm
Max Build Plate Temp80 ºC
Build Plate SurfacePEI
Build Chamber During ProcessOpen
Number of Extruders 1
Installation Space / Requirements 
Overall Dimensions 347 mm x 315 mm x 365 mm
Net Weight 5.5 kg
Max Power Consumption 150 W
Voltage AC: 100 V240 V (50-60 Hz)
Equipment 
Hepa FilterNo
Filament Runout SensorYes
Filament Clogging SensorYes
Power Loss Fail SafeYes
Touch ScreenYes
Connection 
USB Port No
WLANYes
Accuracy 
Shipping 
Shipping Box 385 mm x 430 mm x 430 mm
Gross Weight 8.2 kg
Reviews
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account