Upgrades

New Bondtech Internal Filament Sensor Extruder for Prusa Mini. This extruder is an evolution of our previous high-resolution extruder upgrade for the Prusa Mini.Filament Sensor The new filament sensor for Prusa Mini/+ may be mounted inside the extruder housing. The IFS Extruder for Prusa Mini may be used without the filament sensor. With a simple process it is easy to later update it to fit the Prusa Filament Sensor inside.Bondtech IFS Extruder For Prusa Mini or Mini+Bondtech IFS ExtruderFits Prusa Mini or Mini+

Upgrade your extruder to a Microswiss direct drive extruder.FeaturesNo modification required, simple plug and playNo printed brackets or sandwiches

Upgrade your extruder to a Microswiss direct drive extruder.FeaturesNo modification required, simple plug and playNo printed brackets or sandwiches

This is a LGX Direct Drive Setup to use on Artillery Sidewinder X1, prepared to use Mosquito (screw mount) hotends from Slice Engineering. Hotend, fan and nozzle are included. The Mosquito fan needs a connector change that we perform on the fans ordered with this upgrade kit.

This is a LGX™ upgrade kit to use on Prusa MK3S and MK3S+. Only with Mosquito or Mosquito Magnum hotends from Slice Engineering. A compatible X-carriage and Mosquito hotend are required. If you don’t have them yet, check and add the optional items below.

Micro Swiss Bowden Dual Gear Extruder features the same quality construction as our Direct Drive extruders. It is designed to be a bolt-on replacement to most of the Bowden extruder machines on the market.

Master All Materials * Excel With Flexibles The LGX Shortcut Mosquito Printhead is a special unit that includes the LGX Large Gears eXtruder and the LGX Shortcut short filament path hotend based on Copperhead, that will master all materials and excel with the soft and flexible.

This is a LGX Shortcut Upgrade Kit to use on Prusa MK3S and MK3S+. It uses a short Mosquito hotend from Slice Engineering with a Bondtech heatsink. Requires a X-carriage You may download the x-carriage model, change it and/or print it yourself. Or validate the checkbox below to add it to your cart.

This is a LGX Shortcut Upgrade Kit to use on Prusa MK3S and MK3S+. It uses a short Copperhead hotend from Slice Engineering with a Bondtech heatsink. Requires a X-carriage You may download the x-carriage model, change it and/or print it yourself. Or validate the checkbox below to add it to your cart.

Upgrade kit based on the LGX Lite to use on the Voron V0.1 The Mini After LGX Lite plastic parts are made of grey Polyamide (PA12) with no dyeing featuring a wax protective coating. A hotend/fan adapter is required to use this kit. We have a mount available for Klicky users.

Designed for rigid and flexible materials… … and improved cooling capacity. Main Advantages: Is easier to cool down and to install Allows higher Volumetric Flow Rate Supports rigid, flexible and soft materials Prints flexible and soft materials faster It is small and light This LGX printhead only supports 1.75 mm size filament. No heater or thermistor is included.

Designed for rigid and flexible materials and improved cooling capacity. Main Advantages: Is easier to cool down and to install Allows higher Volumetric Flow Rate Supports rigid, flexible and soft materials Prints flexible and soft materials faster It is small and light yet robust Allows one hand nozzle change. This LGX printhead only supports 1.75 mm size filament. No heater or thermistor is included.

Designed for rigid and flexible materials… … and improved cooling capacity. Main Advantages: Enables Industrial level Volumetric Flow Rates Supports rigid, flexible and soft materials Prints flexible and soft materials faster Easy to cool down and to install Forms a robust high-flow printhead Allows for one-hand nozzle change This LGX printhead only supports 1.75 mm size filament. No heater or thermistor is included.

This extruder overcomes the shortcomings of all current counterparts on the market, to create an optimal printing experience for everyone.Features:Lightweight3:1 Gear ratioAdaptable to wide range of 3D PrintersHardened steel, precision cut Dual Gear driveIndustry shortest, highly constrained, TwinClad XT plated filament pathBevel Gear system allows a low overhang extruder mountIntegrated with a Micro Swiss All Metal Hotend

Upgrade kit compatible with LGX Lite only to use on: Creality CR-6 SE CR-6 Max CR-10 Smart The LGX Lite Arrow for Creality plastic parts are made of grey Polyamide (PA12) with no dyeing featuring a wax protective coating. Extruder not included. A LGX Lite extruder is required to use this kit.

Mount a Slice hotend on your Creality CR-6 SE, CR-6 Max or CR-10 Smart 3D printer. Compatible with the LGX Lite Arrow for Creality Plastic adapter made of grey Polyamide (PA12) with no dyeing featuring a wax protective coating. Hotend not included. A Slice Engineering hotend is required to use this set. Copperhead (screw mount only) Mosquito Mosquito Magnum Mosquito Magnum+ 1.75mm Air

This extruder overcomes the shortcomings of all current counterparts on the market, to create an optimal printing experience for everyone.Features:Lightweight3:1 Gear ratioAdaptable to wide range of 3D PrintersHardened steel, precision cut Dual Gear driveIndustry shortest, highly constrained, TwinClad XT plated filament pathBevel Gear system allows a low overhang extruder mountIntegrated with a Micro Swiss All Metal Hotend

This extruder overcomes the shortcomings of all current counterparts on the market, to create an optimal printing experience for everyone.Features:Lightweight3:1 Gear ratioAdaptable to wide range of 3D PrintersHardened steel, precision cut Dual Gear driveIndustry shortest, highly constrained, TwinClad XT plated filament pathBevel Gear system allows a low overhang extruder mountIntegrated with a Micro Swiss All Metal Hotend

This extruder overcomes the shortcomings of all current counterparts on the market, to create an optimal printing experience for everyone.Features:Lightweight3:1 Gear ratioAdaptable to wide range of 3D PrintersHardened steel, precision cut Dual Gear driveIndustry shortest, highly constrained, TwinClad XT plated filament pathBevel Gear system allows a low overhang extruder mountIntegrated with a Micro Swiss All Metal Hotend