Spare Parts & Accessories

Copper and Hardened Vanadium Steel nozzle for high flow applications with abrasive materials. Increase the Max Volumetric Flow of your Volcano style heat block by 50%. Nozzle is supplied with Nickel Coating (grey color).Will fit the following blocks/printers:E3D Volcano blocksOther Volcano type blocksArtillery Sidewinder X1 and X2Anycubic VyperFLSUN Super RacerArtillery Genius ProAnycubic Kobra and Kobra MaxLulzbot TAZ MOARstruderOthers compatible with Volcano

Copper and Hardened Vanadium Steel nozzle for high flow applications with abrasive materials. Increase the Max Volumetric Flow of your RepRap M6 style heat block by 50%. Nozzle is supplied with Nickel Coating (grey color).Will fit the following blocks/printers:Mosquito® / MagnumMosquito® LiquidMosquito® Magnum+Copperhead™E3D Chimera and KrakenE3D V4, V5 and V6 blocksPrusa i3, Prusa MiniRepRap M6

Copper and Hardened Vanadium Steel nozzle for high flow applications with abrasive materials. Increase the Max Volumetric Flow of your RepRap M6 style heat block by 50%. Nozzle is supplied with Nickel Coating (grey color).Bondtech CHT BiMetal MK8 Coated Nozzle Advantages:Abrasive-proof to work with Carbon and Glass fiber composite materialsHigher melt capacity by increasing the surface area of the heating wallsFlow Rate gains between 25 and 65%Competitive price/performance priceMachined with ultra-precisionCopper body and Hardened Vanadium Steel inserts nozzle with Nickel coated surface

These are nozzles for high flow applications Increase the Max Volumetric Flow of your Spider hotend by 25-65%. They are manufactured by Bondtech in-house, and will fit the following hotends: Creality Spider Hotend Creality Spider Speedy Ceramic Hotend

Spare Puch-Pin for Antclabs BLTouch. Plastic version for BLTouch-Smart V2.0 and later.

New Bondtech Internal Filament Sensor Extruder for Prusa Mini. This extruder is an evolution of our previous high-resolution extruder upgrade for the Prusa Mini.Filament Sensor The new filament sensor for Prusa Mini/+ may be mounted inside the extruder housing. The IFS Extruder for Prusa Mini may be used without the filament sensor. With a simple process it is easy to later update it to fit the Prusa Filament Sensor inside.Bondtech IFS Extruder For Prusa Mini or Mini+Bondtech IFS ExtruderFits Prusa Mini or Mini+

This is a LGX Direct Drive Setup to use on Artillery Sidewinder X1, prepared to use Mosquito (screw mount) hotends from Slice Engineering. Hotend, fan and nozzle are included. The Mosquito fan needs a connector change that we perform on the fans ordered with this upgrade kit.

This is a LGX™ upgrade kit to use on Prusa MK3S and MK3S+. Only with Mosquito or Mosquito Magnum hotends from Slice Engineering. A compatible X-carriage and Mosquito hotend are required. If you don’t have them yet, check and add the optional items below.

These are nozzles for High Flow applicationsThey are manufactured by Bondtech in-house.Features1 unit per packAvailable sizes : 0.60, 0.8, 1.0, 1.4 and 1.8mmOptimized for 1.75mm filamentRequires 8mm wrench

These are nozzles for High Flow applicationsThey are manufactured by Bondtech in-house.Features1 unit per packAvailable sizes : 0.60, 0.8, 1.0, 1.4 and 1.8mmOptimized for 1.75mm filamentRequires 8mm wrench

These are nozzles for High Flow applicationsThey are manufactured by Bondtech in-house.Features1 unit per packAvailable sizes : 0.60, 0.8, 1.0, 1.4 and 1.8mmOptimized for 1.75mm filamentRequires 8mm wrench

These are nozzles for High Flow applicationsThey are manufactured by Bondtech in-house.Features1 unit per packAvailable sizes : 0.60, 0.8, 1.0, 1.4 and 1.8mmOptimized for 1.75mm filamentRequires 8mm wrench

These are nozzles for High Flow applicationsThey are manufactured by Bondtech in-house.Features1 unit per packAvailable sizes : 0.60, 0.8, 1.0, 1.4 and 1.8mmOptimized for 1.75mm filamentRequires 8mm wrench

Master All Materials * Excel With Flexibles The LGX Shortcut Mosquito Printhead is a special unit that includes the LGX Large Gears eXtruder and the LGX Shortcut short filament path hotend based on Copperhead, that will master all materials and excel with the soft and flexible.

This is a LGX Shortcut Upgrade Kit to use on Prusa MK3S and MK3S+. It uses a short Mosquito hotend from Slice Engineering with a Bondtech heatsink. Requires a X-carriage You may download the x-carriage model, change it and/or print it yourself. Or validate the checkbox below to add it to your cart.

This is a LGX Shortcut Upgrade Kit to use on Prusa MK3S and MK3S+. It uses a short Copperhead hotend from Slice Engineering with a Bondtech heatsink. Requires a X-carriage You may download the x-carriage model, change it and/or print it yourself. Or validate the checkbox below to add it to your cart.

Upgrade kit based on the LGX Lite to use on the Voron V0.1 The Mini After LGX Lite plastic parts are made of grey Polyamide (PA12) with no dyeing featuring a wax protective coating. A hotend/fan adapter is required to use this kit. We have a mount available for Klicky users.

Designed for rigid and flexible materials… … and improved cooling capacity. Main Advantages: Is easier to cool down and to install Allows higher Volumetric Flow Rate Supports rigid, flexible and soft materials Prints flexible and soft materials faster It is small and light This LGX printhead only supports 1.75 mm size filament. No heater or thermistor is included.

Designed for rigid and flexible materials and improved cooling capacity. Main Advantages: Is easier to cool down and to install Allows higher Volumetric Flow Rate Supports rigid, flexible and soft materials Prints flexible and soft materials faster It is small and light yet robust Allows one hand nozzle change. This LGX printhead only supports 1.75 mm size filament. No heater or thermistor is included.

Designed for rigid and flexible materials… … and improved cooling capacity. Main Advantages: Enables Industrial level Volumetric Flow Rates Supports rigid, flexible and soft materials Prints flexible and soft materials faster Easy to cool down and to install Forms a robust high-flow printhead Allows for one-hand nozzle change This LGX printhead only supports 1.75 mm size filament. No heater or thermistor is included.

Upgrade kit compatible with LGX Lite only to use on: Creality CR-6 SE CR-6 Max CR-10 Smart The LGX Lite Arrow for Creality plastic parts are made of grey Polyamide (PA12) with no dyeing featuring a wax protective coating. Extruder not included. A LGX Lite extruder is required to use this kit.

Mount a Slice hotend on your Creality CR-6 SE, CR-6 Max or CR-10 Smart 3D printer. Compatible with the LGX Lite Arrow for Creality Plastic adapter made of grey Polyamide (PA12) with no dyeing featuring a wax protective coating. Hotend not included. A Slice Engineering hotend is required to use this set. Copperhead (screw mount only) Mosquito Mosquito Magnum Mosquito Magnum+ 1.75mm Air

Your Raise3D Pro2 is failing on those big PLA prints you bought it for? We have the fix. The Raise3D Pro2 can actually be a very good 3D printer if you use this. Main benefits: Heat creep is minimized by Copperheads thermal performance Better layer bonding from the Bondtech CHT nozzles and higher flow with PLA and other non-abrasive materials Compatible with all RepRap nozzles Easy and quick to install Includes a gauging tool to achieve optimal hotend setup

The Diamondback Science team has been developing world-class diamond products for the energy industry for more than 40 years. Members of the team recently developed a proprietary Polycrystalline Diamond (PCD) nozzle to be used in 3D printing that can handle the most challenging applications! Easier to clean and reduces tip clogging, improves layer adhesion, has a solid diamond tip, any filaments, longer life, lowers operating temperature, and delivers unmatched wear resistance!

The Diamondback Science team has been developing world-class diamond products for the energy industry for more than 40 years. Members of the team recently developed a proprietary Polycrystalline Diamond (PCD) nozzle to be used in 3D printing that can handle the most challenging applications! Easier to clean and reduces tip clogging, improves layer adhesion, has a solid diamond tip, any filaments, longer life, lowers operating temperature, and delivers unmatched wear resistance!

The Diamondback Science team has been developing world-class diamond products for the energy industry for more than 40 years. Members of the team recently developed a proprietary Polycrystalline Diamond (PCD) nozzle to be used in 3D printing that can handle the most challenging applications! Easier to clean and reduces tip clogging, improves layer adhesion, has a solid diamond tip, any filaments, longer life, lowers operating temperature, and delivers unmatched wear resistance!

The Diamondback Science team has been developing world-class diamond products for the energy industry for more than 40 years. Members of the team recently developed a proprietary Polycrystalline Diamond (PCD) nozzle to be used in 3D printing that can handle the most challenging applications! Easier to clean and reduces tip clogging, improves layer adhesion, has a solid diamond tip, any filaments, longer life, lowers operating temperature, and delivers unmatched wear resistance!

The Diamondback Science team has been developing world-class diamond products for the energy industry for more than 40 years. Members of the team recently developed a proprietary Polycrystalline Diamond (PCD) nozzle to be used in 3D printing that can handle the most challenging applications! Easier to clean and reduces tip clogging, improves layer adhesion, has a solid diamond tip, any filaments, longer life, lowers operating temperature, and delivers unmatched wear resistance!